All products in this announcement are customer setup.

For Direct Network Attachment - Hardware Compatibility

When the printer contains an optional Card for IPDS and SCS/TNe, it attaches to a network using one of the following MarkNet print servers:

• Standard Ethernet (100BaseTX/10BaseT) Network port in the printer
• MarkNet(tm) N2000 Series print servers
• MarkNet X2000 Series print servers (AFP/IPDS only)
• MarkNet Pro print servers (AFP/IPDS only)

The optional MarkNet print servers support Token-Ring (4Mbps or 16 Mbps), Ethernet 10BaseT/10Base2 and Ethernet 100BaseTX/10BaseT with the following Network Operating Systems: Novell NetWare (including NetWare Directory Services - NDS and NDPS), Microsoft Windows NT 4.0 Server, Microsoft Windows 2000 Server and Advanced Server, TokenTalk and EtherTalk, and the following UNIX platforms: Caldera OpenLinux, IBM AIX, Compaq Tru64 (Digital), HP-UX, Red Hat Linux, SCO OpenServer, UnixWare, SGI IRIX, Sun Solaris, Sun Solaris x86, SuSE Linux and TurboLinux.

Notes

1. MarkNet N2000 microcode level 3.15.x or later is required for SCS/TNe support.
2. For OptraImage network ports, microcode level 5.15.x or later is required for SCS/TNe support.
3. Any MarkNet X2000 microcode level provides AFP/IPDS support only.
4. For IPDS printing, a minimum of 16MB of printer memory is required.

For Direct Twinaxial Attachment - Hardware Compatibility

When the printer contains an optional Card for IPDS and SCS/TNe and the Coax/Twinax Adapter for SCS (P/N 44H0011) with a twinaxial cable, the printer attaches to the following IBM hardware:

• AS/400e servers and e-systems
• AS/400 Twinaxial Workstation Controllers
• AS/400 Advanced System/36 Twinaxial Workstation Controller
• 5494 Remote Control Unit
• 5394 Remote Control Unit

Notes

1. Coax/Twinax Adapter for SCS (P/N 44H0011) microcode level H02-8491 or later is required.
2. There must be two separate twinax addresses, one for the SCS emulation using the Adapter for SCS and another for the Card's IPDS emulation. The Adapter for SCS does not require the Card for IPDS and SCS/TNe to support SCS.
3. The Coax/Twinax Adapter for SCS provides SCS data stream support for a twinax connection that requires both IPDS and SCS data stream support when using the Card for IPDS and SCS/TNe.

The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are as follows:

• AS/400 PSF/400 V4R5, V5R1 or later
• AS/400 OS/400 V4R5, V5R1
• AS/400 OS/400 V4R5, V5R1 or later
• AS/400 SSP Release 7.1
• IPDS Advanced Function PRPQ is required if using the Card for IPDS

When the printer contains the Card for IPDS and SCS/TNe and the Coax/Twinax Adapter for SCS with a coaxial cable, the printer attaches to the following IBM hardware:

• IBM 3174 Control Unit
• ES/9000 Work Station Subsystem Controller
• IBM 3174 compatible control units

Note: Coax/Twinax Adapter for SCS microcode level H01-9072 or later is required.

Note: The Coax/Twinax Adapter for SCS provides SCS data stream support of a coax connection that requires both IPDS and SCS data stream support when using the Card for IPDS and SCS/TNe.

When the printer contains the optional Coax/Twinax Adapter for SCS with a twinaxial cable, the printer attaches to the following IBM hardware:

• AS/400e servers and e-systems
• AS/400 Twinaxial Workstation Controllers
• AS/400 Advanced System/36 Twinaxial Workstation Controller
• 5494 Remote Control Unit
• 5394 Remote Control Unit

When the printer contains the optional Coax/Twinax Adapter for SCS with a coaxial cable, the printer attaches to the following IBM hardware:

• IBM 3174 Control Unit
• ES/9000 Work Station Subsystem Controller
• 3174 compatible control units

Performance Specifications

The maximum print speeds are shown in the following table. Actual performance depends on:

• Interface to the host (serial, parallel, network)
• Host system and application
• Network complexity and traffic
• Page complexity and content
• Certain printer options installed and selected
• Printer memory
• Media size, media type setting and tray source

First Print-Out Times (FPOT) are shown in the following table.

Note: FPOT is defined as the time when the print engine receives the Start Command from the printer controller to when the trailing edge of the first sheet exits the printer's exit feed rollers into the output bin. All measurements are with letter size paper, Long Edge Feed (LEF), standby mode.

Usage Rates

The maximum monthly usage for Infoprint 1145 is 200,000 impressions. IBM does not recommend printing to this monthly maximum on a consistent basis.

Stapling Capability

Hole Punch Capability

Offset Stacking

Offset stacking of 15 mm (0.6 in.) can be set in the printer for job or copy boundary. When multiple copies are selected in certain applications or operating environments, the document is sent multiple times to the printer and would be treated as separate print jobs. Offset stacking in the printer Standard Bin is 30mm (1.18 in.).

Finisher Limitations

• The Finisher requires the High Capacity Feeder or Printer Stand be installed
• Maximum paper size for both bins is 11.7 x 17.0 (297mm x 432mm)
• Universal media output size is not supported
• Stapling may reduce output bin capacity
• The hole punch configuration is factory set and not user or field configurable
• The hole punch does not support transparency, labels or card stock
• The capacity of the printer Standard Bin is reduced to 300 sheets (20lb/75g/m2, A4/Letter, plain paper) with the Finisher installed

Print Area

The Infoprint 1145 printable area is limited to within 4.0mm (0.16 in) of the edges of the media. Any information placed outside this specified printable area will not print.

Data Streams

The Infoprint 1145 supports the following data streams:

• PostScript Level 3 Emulation
• Hewlett-Packard Company PCL 6 Emulation
• Optional IPDS (Intelligent Printer Data Stream)
• PPDS (Page Printer Data Stream) Migration Tool

Fonts and Symbol Sets

The printer's resident fonts include support for languages that use the following character sets:

• Latin 1 (US, Western Europe, etc)
• Latin 2 (Eastern Europe)
• Latin 5 (Turkish)
• Latin 6 (Baltic)
• Cyrillic
• Greek
• Japanese (Katakana characters only)

There are 83 symbol sets in the PCL 6 emulation to support all the languages that use these characters. The symbol set names are listed below. Not all symbol sets are supported by all fonts. Refer to the Technical Reference manual or use the printer operator panel to find which symbol sets are supported by each font.

Support for the euro currency character is included in all applicable fonts for both the PostScript and PCL emulations. Twelve of the PCL symbol sets support the euro character including all seven Windows symbol sets.

The following table lists the number of fonts available in each emulation. The typeface names are shown below.

The fonts in the PCL emulation are compatible with the fonts in the HP4500 and include four additional fonts and many extra symbol sets to support extra languages and applications. The fonts in the PostScript emulation are compatible with Adobe PostScript 3 and include 20 additional fonts.

Additional fonts can be downloaded to the printer RAM or optional Flash DIMM or Hard Disk. PCL emulation supports both scalable and bitmapped downloadable fonts. PostScript emulation supports only downloadable scalable fonts, and PPDS emulation supports only downloadable bitmapped fonts. Font cards and font cartridges are not supported.

Included on the CD-ROM shipped with the printer are a variety of downloadable fonts for Hebrew and Arabic.

Also included on the CD-ROM is the FontVision Font Management utility and screen fonts to match the resident scalable fonts. An additional 48 TrueType fonts are available on the IBM web site when a customer registers the printer.

PostScript 3 Fonts

Note: Font order is partially alphabetical and partially functional.

PCL 6 Fonts

Note: Font order is partially alphabetical and partially functional.

PPDS Fonts

Note: Font order is partially alphabetical and partially functional

Symbol Sets

Note: Not all fonts support all of the symbol sets. Refer to the Technical Reference manual for your specific printer or use your printer operator panel to find which symbol sets are supported by each font.

Media Support

All models come standard with two 500 sheet paper drawers and one 35 sheet auxiliary tray. One 500 sheet output bin is standard. See tables below for standard and maximum media capacities.

Input Media Capacities (sheets)

Note: When the Envelope Feeder option is installed, the auxiliary tray is not useable.

Output Media Capacities (sheets)

Note: Standard Bin capacity is 300 sheets with Finisher installed.

Media Sizes Supported

Input Media

Output Media

Note: Envelopes are automatically routed to the standard Bin if any other destination is selected.

Media Type and Weight Supported

Follow the media guidelines below for successful printing:

• Paper:
  • Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.
  • Colored papers must be able to withstand 190 deg C (400 deg F) fusing temperature.
  • Preprinted forms and letterheads should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with the Infoprint 1145.
  • Unsuitable papers include multipart forms and documents; chemically treated papers; coated, synthetic and thermal papers; and preprinted papers requiring a high degree of registration.
  • Recycled paper less than 80g/sqm may cause unacceptable results.
• Envelopes:
  • All envelopes should be new, unused, and without package damage.
  • Envelopes with excessive curl or twist exceeding 6 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.
  • Minimum weight: 75 g/m2 (20 lb.)
  • The following envelopes should not be used:
    • Envelopes with windows, holes, perforations, cutouts, or deep embossing.
    • Envelopes with metal clasps, string ties, or metal folding bars.
    • Envelopes with exposed flap adhesive when the flap is in the closed position.
    • For best results, printing on new 90 g/m2 (24 lb.) sulfite or 25% cotton bond envelopes is recommended.
    • Under high humidity conditions (over 60%), envelopes may seal during printing.
• Transparencies:
  • Use letter or A4-size sheets only.
  • Transparencies specifically designed for xerographic copy machines or laser printers may be used with the Infoprint 1145.
• Labels:
  • Labels should be selected using guidelines found in the User's Reference, Complete Printer Reference, and tested for acceptability.

Differences Between Infoprint 11xx IPDS and Previous IBM Printers

The Infoprint 11xx printers have a different level IPDS support than the previous IBM workgroup printers. Some key differences are:

• For emulation, the Infoprint 11xx printers emulate the 4028, 4312, 4317, 4324, 3812/16, and 3112/16. These are LF1 emulations ONLY.
• Infoprint 11xx printers do not support "Manage IPDS Dialog".
• Infoprint 11xx printers do not support Tray Protection.
• Infoprint 11xx printers do not support Edge Protection.

Details on Card for IPDS and SCS/TNe Emulation

Product Overview:

• The SCS/TNe or IPDS configuration settings can be changed using MarkNet print server's resident web server, a browser and the printer's IP address.
• For IPDS emulation printing, the capture of outline fonts (LF3) is now supported.
• For Infoprint 1140/1130 and IPDS emulation, staple and offset stacking for the finisher are supported.
• For Infoprint 1145 and IPDS emulation, offset stacking is supported in the printer's standard bin and the finisher bin. Stapling is supported for the finisher.

These affordable Cards for IPDS and SCS/TNe provide configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers. These Cards for IPDS and SCS/TNe are compatible with IBM mainframe or IBM AS/400 applications that generate SCS (LU1) output or with applications that output AFP/IPDS through Print Services Facility (PSF).

IBM continues to make it easy for IS/IT managers to have an affordable printing solution in a distributed network or on a LAN for applications or software that generate AFP/IPDS or SCS. This includes:

• Using AFP/IPDS and PSF, capture fonts to hard disk or to flash memory resulting in reduced network traffic over LAN, coaxial or twinaxial connections.
• Supports TN3270E or TN5250E SCS (LU1) over the LAN using TCP/IP with Telnet.
• No changes to host applications.
• Supports emulation of common IBM IPDS and SCS printers.
• Additional or new remote controllers with twinax or coax cabling are unnecessary. However, twinax and coax connections continue to be available using the Coax/Twinax Adapter for SCS.
• One LAN printer can print LAN (PostScript, PCL, etc) and mainframe or AS/400 documents (AFP/IPDS, SCS).

With a card and the standard Ethernet network port or a MarkNet print server using TCP/IP, the printer becomes an IBM host workstation printer capable of printing AFP/IPDS or SCS documents from an AS/400 or System/390 computer.

With the appropriate host software and one of these options, the IBM printer emulates an IBM mainframe or AS/400 host printer. See the compatibility section for details.

With the TN3270E and TN5250E extended Telnet protocol support in these options, the printer emulates one TN3270E printer session and up to 4 TN5250E printer sessions using the LU1 SCS data stream over TCP/IP. This is supported directly from an AS/400 or from a mainframe using TCP/IP or through any TN3270E capable gateway that supports TN3270E according to RFC 2355. The DSC/DSE or SCS data streams over LU3 or LU0 are not supported. The Telnet protocol function is only supported with through the standard Ethernet network port or with the MarkNet N2000 print servers. See the Devices Supported section for more details.

For IPDS emulation, the card supports resident scalable fonts and 300, 600, 1200 image quality or 1200 dpi (except Infoprint 1145) print resolutions. The resolution is selected through an IPDS MENU setting. This setting determines the print resolution of IPDS text, graphics, bar code, scalable image and scalable font data.

The printer can be configured to take advantage of additional RAM, and when attached to a LAN through the standard Ethernet port or a MarkNet print server, can save IPDS resources to improve performance for complex IPDS print jobs with host resources such as fonts, overlays or page segments.

The IPDS emulation supports the IPDS data and resource towers. Fonts can now be downloaded, captured and saved to hard disk or flash memory in the printer. The US Postal Bar code POSTNET font and the Euro currency symbol are supported within IPDS.

The Euro currency symbol is also supported for the SCS, PostScript and PCL 6 emulations.

Fonts

AFP/IPDS Font and Typestyle Support:

• The Card for IPDS supports resident scalable fonts. The font complement with 12 typestyles supports the IBM Font Collection (Core Interchange Scalable Font Sets - Courier, Times New Roman and Helvetica faces).

The following languages are supported:

• Latin 1: Afrikaans, Belgian (French and Dutch), Brazilian Portuguese, Canadian English, Canadian French, Catalan, Danish, Dutch, Finnish, French, German, Icelandic, Italian, Latin American Spanish, Norwegian, Portuguese, Spanish (Castillian), Swedish, Swiss (German, French and Italian), United Kingdom English, United States English
• Latin 2/ROECE: Albanian, Croatian, Czech, East German, Hungarian, Polish, Romanian, Serbian, Slovak, Slovenian
• Latin 3, 4, 5 and 6: Maltese, Turkish, Estonian, Greenlandic, Lappish, Latvian, Lithuanian
• Greek
• Cyrillic for: Bulgarian, Byelorussian, Macedonian, Russian, Serbo-Croatian, Ukrainian.

The font complement for the IBM Coordinated Scalable Font Set provides support for Latin 1 languages in 3 Letter Gothic (medium, bold and italic) and 3 Prestige (medium, bold and italic) scalable typestyles. Scalable OCR-A and OCR-B typestyles are supported.

The following fonts are supported using bitmaps: APL 12, Boldface PS, Boldface Italic PS, OCR-A 10, OCR-B 10 and Prestige PS. The OCR bitmap fonts have different FGIDs than the scalable font versions.

The IBM 4028 Compatibility Font set consists of 22 fixed pitch typestyles supported by bitmap fonts. Times Roman typestyles (13) are created from Times New Roman scalable typestyles of the same weight and style.

The IBM 3812/3816 Compatibility Font set consists of 35 typestyles supported by bitmap fonts at 240 dpi.

Font Capture

Fonts can also be captured dynamically and saved (cached) to hard disk or flash memory in the printer using PSF/MVS V2.2.0 and PSF/400 V4R2 or later. A captured font then appears as a printer resident font. If many fonts are used in the jobs that are printed, capturing fonts and saving them in the printer will decrease network traffic on busy networks.

PSF defines fonts as either public or private. In order to capture a font, it must be marked as eligible and public. A private font is not eligible to be captured.

Note: Do not mark sensitive fonts such as signatures and MICR fonts as eligible to be captured. Check the font licensing information before a font is made eligible for capture.

If a font is to be captured, the appropriate files for the coded font or character set and code page resources must all be marked.

The printer must also be defined as capable to capture fonts in PSF. For bitmap fonts, the font resolution of the font captured must match the resolution of the emulated printer for it to be recognized by the printer as a printer resident font. For example, the IBM 3812 and 3816 printer emulations require 240 dpi fonts. The IBM 4028 printer emulation requires 300 dpi fonts.

AS/400

On the AS/400, Font capture is supported by AS/400 OS/400 V4R5 or later. To define the printer as capable to capture, in the PSF configuration (CRTPSFCFG), set FNTCAPTURE (*YES).

Eligible fonts must be marked. Display the font attributes to identify marked fonts (DSPFNTRSCA). Check for FNTCAPTURE (*YES). Use Create Font Resource (CRTFNTRSC) to mark font resources from other systems. Use Change Font Resource (CHGFNTRSC) to mark fonts that are not marked as eligible.

For a font to be eligible for capture, it must have non zero fields for FGID and GCSGID. Any fonts captured and saved in the printer's hard disk or flash memory are saved across instances of the writer.

Mainframe (MVS and VSE)

Font capture is supported by PSF/MVS 2.2.0 with APAR 0W08340. With PSF/MVS, use APSRMARK to mark eligible fonts if they are not already marked. The IBM Font Collection fonts are already marked as eligible for capture.

Font capture is supported by PSF/VSE 2.2.1 with APAR DY43969. With PSF/VSE, use APSRMARK to mark eligible fonts if they are not already marked.

SCS Font and Typestyle Support

The SCS emulation uses the default resolution set using the Quality menu from the printer's operator panel. The SCS emulation in the card uses PCL fonts from the printer firmware. If the printer is set to 600 dpi, then all SCS data is printed with 600 dpi PCL fonts. It is possible to imbed PCL and PJL commands into the SCS data stream and pass them to the printer utilizing ASCII transparency.

On the AS/400, fonts can be selected by specifying the FGID (Font Global Identifier) or by characters per inch (CPI). With IBM mainframes, only CPI font selection is possible.

A parameter in the SCS data stream (Final Form Text (Level 2) Document Content Architecture (FFT (L2) DCA)) Page Presentation media (PPM) command is used to control Duplex printing.

These 6 fonts are included in SCS emulation as 300 dpi bitmap fonts: OCR-B (3), Boldface Italic (155), Boldface (159), Essay (160), Essay Bold (163) and Document (175).

Compatibility

For the Card for IPDS and SCS/TNe, IPDS is supported under the IPDS MENU settings and SCS is supported under the SCS/TNe MENU settings.

Support Notes:

• Microcode updates and User's Guides are available from the IBM web site
• See the appropriate User's Guide for configuration instructions
• When the printer is emulating an IBM printer, the function supported depends on the IBM host software

SCS LU1 Printing using a Gateway and TCP/IP

If TN3270E capable SNA gateway software supports the TN3270E protocol according to RFC 2355, then a TN3270e session can be used to print SCS jobs directly from a mainframe or AS/400. Examples of these gateways are: as follows:

• IBM SecureWay Communications Server 6.0.2 for Windows NT 4.0, Windows 2000, AIX, UnixWare 7, OS/2 Warp
• Microsoft NetResults SNA Server 4.0
• Novell NetWare for SAA 4 as either a TN3270E Server or TN5250 Server
• Attachmate E-Vantage SNA Gateway 2.0
• Barr Systems Communications Server
• Cisco TN3270 Server
• OpenConnect using the WebConnect SNA Access Server or SNA Print Server

Agency Approvals

The Infoprint 1145 printer complies with the global safety standard for Information Technology Equipment, IEC 60950, and its country equivalents in the markets we serve. The following sections highlight the approvals and certifications that Infoprint 1145 is expected to receive.

Low Voltage Models

• Underwriters Laboratories, Inc. UL 1950, Third Edition, Information Technology Equipment
• U.S. FDA, CDRH registration per 21 CFR Chapter I, Subchapter J, Section 1040
• Energy Star compliant
• FCC Class B (w/o INA), Class A (w/INA) per FCC Rules, Parts 2 and 15
• Canadian Standards Association CAN/CSA-C22.2 No. 950-95, Third Edition, Information Technology Equipment Note: This and the UL standard are a single "bi-national" document, published jointly with UL
• Industry Canada (EMC) Compliance Statement
• IEC 320-1, International Standard Electrical Appliance Connector
• Official Mexican State Agency approval & import registration to equipment standard NOM-019-SCFI-1993 Safety of Data Processing Equipment

High Voltage Models

• International Chemical Registration
• International Electrotechnical Commission IEC 60950 2nd Edition, plus Amendments 1, 2, 3, 4
• EN 60950 + Amendments 1, 2, 3, 4
• IEC 60825-1, International Standard Safety of Laser Products
• EN 60825-1
• EN 55022: 1998
• EN 55024: 1998
• EN 61000-3-2: 1995 & EN 61000-3-3: 1995
• IEC 320-1, International Standard Electrical Appliance Connectors
• CB Certificate and Test Report to read as follows:
  • A sample of the product was tested and found to be in conformity with IEC 60950 Edition 2, with amendments 1 (1992), 2 (1993) 3 (1995), and 4 (1996); National Deviations AT, AU, BE, CH, CN, CZ, DE, DK, EN, FI, FR, GB, GR, HU, IE, IL, IS, IT, KR, NL, NO, PL, RU, SE, SI, SG, SK, UA, YU and ZA. (IEC 60825-1 Laser Safety Report shall be included).
• European Union - CE marking via EU Declaration of Conformity to the EMC (89/336/EEC) and low voltage (73/23/EEC) Directives
• CISPR Class A (with INA, networked attached)
• CISPR Class B (Non-networked)

802.11g Wireless to Ethernet

Specifications

MarkVision Professional (provided on the printer CDs)

MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devices in an enterprise environment via a web browser. It provides IT administrators with real time device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.

The 802.11g Wireless to Ethernet acts as a wireless Ethernet bridge. When used with a Lexmark printer that supports MarkVision Professional management capabilities, the wireless bridge provides the same level of functionality as if the printer were connected to the network via a wired connection.

MFP Information / Compatibility

When used with a network-capable MFP, the 802.11g Wireless to Ethernet provides network capabilities equivalent to a MFP connected to a wired 10/100BaseTX Ethernet network.

Network Security

The 802.11g wireless to Ethernet supports the following wireless security methods and protocols:

• WPA-Personal-level security:
  • TKIP
  • Pre-Shared Key (PSK)
• WEP:
  • 64-bit
  • 128-bit

These security modes cannot be used in combination. For example, if a user selects WPA-personal, the user cannot enable WEP security features.

In addition to the wireless security methods, the 802.11g Wireless to Ethernet included with the printer or MFP provides the following access control methods that an be used in conjunction with any wireless security methods stated above:

• Device configuration password protection
• Restricted Server List

Operating System Support

• Workstation Operating Systems:
  • Apple Mac OS 8.6-9.x (LPR printing)
  • Apple Mac OS X.2 and above (Zero Configuration support)
  • Windows 98SE, Me
  • Windows NT 4.0(1)
  • Windows 2000
  • Windows XP
  • Red Hat Linux 7.3, 8.0, 9.0(1)
  • SuSE Linux 8.0, 8.1, 8.2(1)
• Server Operating Systems:
  • Apple Mac OS X.2 Server and above
  • Windows NT 4.0 Server(1)
  • Windows 2000 Terminal Server
  • Windows 2000 Server, Advanced Server
  • Windows Server 2003
  • IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(1)
  • Virtually any platform supporting TCP/IP(1)
  • Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0
  • Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(1)
  • Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(1)
  • Red Hat Linux 7.3, 8.0, 9.0(1)
  • SuSE Linux 8.0, 8.1, 8.2(1)

Note: (1) May require initial configuration through Ad-hoc mode.

Printing Protocols

The 802.11g Wireless to Ethernet feature is compatible with all network protocols supported by the printer.

802.11g Wireless to USB

Network Security

The 802.11g wireless to USB supports the following wireless security methods and protocols:

• WPA-Personal:
  • TKIP
  • Pre-Shared Key (PSK)
• WEP:
  • 64-bit
  • 128-bit

These security modes cannot be used in combination. For example, if a user selects WEP, the WPA-Personal cannot be enabled. In addition to the wireless security methods, the print server provides the following access control methods:

• Device configuration password protection
• Restricted Server List

Operating System Support

• Workstation Operating Systems:
  • Apple Mac OS 8.6, 9.x (LPR printing)
  • Apple Mac OS X 10.2 and above (Zero Configuration support)
  • Windows 98SE, Me
  • Windows NT 4.0(2)
  • Windows 2000
  • Windows XP
  • Red Hat Linux 7.3, 8.0, 9.0(2)
  • SuSE Linux 8.0, 8.1, 8.2(2)
• Server Operating Systems:
  • Apple Mac OS X.2 Server and above
  • Windows NT 4.0 Server(2)
  • Windows 2000 Terminal Server
  • Windows 2000 Server, Advanced Server
  • Windows Server 2003
  • IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(2)
  • Virtually any platform supporting TCP/IP(2)
  • Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0
  • Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(2)
  • Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(2)
  • Red Hat Linux 7.3, 8.0, 9.0(2)
  • SuSE Linux 8.0, 8.1, 8.2(2)

Note: (2) May require initial configuration through Ad-hoc mode.

Printing Protocols

The following print protocols are supported:

• Direct IP (TCP 9100)
• LPR/LPD (TCP 515)
• IPP (Internet Printing Protocol) (TCP 631 or TCP 80)
• HBN (Host Based Networking)

Address Management Protocols

The following address management protocols are supported:

• Auto-IP
• DHCP
• DDNS
• mDNS
• ARP
• WINS

Device Management Protocols

The following device management protocols are supported:

• Zero Configuration
• HTTP
• ICMP
• SNMP
• HCP Host Configuration Protocol
• Telnet 9000

File Transfer Protocols

The following file transfer protocols are supported:

• FTP (printing, UCF file configuration)
• TFTP (printing, code updating)

IPDS is not supported through the USB port.

Network Management

These features provide management capabilities primarily via its embedded web server. Basic network management is also provided using traditional TCP/IP functions.

Basic Management

The following basic management applications are supported:

• Ping
• Finger
• Telnet 9000
• Discovery Utility

Advanced Management

These features are designed to allow the user to learn network status and configure network settings remotely. The printer server support

• the following management methods:
• Embedded Web Server
• SNMP
• Universal Configuration Files (UCF)

Embedded Web Server Function

Supported Web Browsers

• Microsoft Internet Explorer 5.0, 6.0 and newer
• Netscape 4.0, 7.0 and newer
• Safari 1.0 and newer

Primary Web Server Functions

The following items are available regardless of the status of the USB-attached device:

• Name and picture of print server
• Wireless status (connect speed, signal strength, Access Point)
• Print Server Setup Page
• Configuration of all general adapter settings (LAA, Contact Name, Locations, Etc.)
• Configuration of all TCP/IP settings
• Configuration of password
• Links and Index section
• Link to Troubleshooting
• Applet to flash update

Certifications

802.11g wireless to Ethernet

These features meet the following standards and has obtained the appropriate approvals.

• UL 60950-1: Safety of Information Technology Equipment
• Code of Federal Regulations 47, FCC Part 15 (Class B)
• FCC Part 15 Subpart C Section 15.247
• FCC Declaration of Conformity (DoC) Mark on the label
• Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
• Industry Canada RSS-210
• UL 60950 3rd Edition

802.11g wireless to USB

These features meet the following standards and has obtained the appropriate approvals.

• Code of Federal Regulations 47, FCC Part 15 (Class B)
• FCC Part 15 Subpart C Section 15.247
• FCC Declaration of Conformity (DoC) Mark on the label
• Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
• Industry Canada RSS-210
• Underwriters Laboratories, Inc., UL 60950-1