|
|
Lexmark Optra SC 1275
<< Printers Home << Lexmark Printers Home << Lexmark Color Laser Printers
Optra S1275 and Network
Ready 1275n
12-page-per-minute
black/3-ppm
color engine speed
Excellent throughput
performance
with no compromise to print quality
True 600 x 600 dpi for
crisp
black text and vibrant colors
1200 Image Quality for
optimal
printing of fine details in photos
Vivid, consistent
printing on
plain paper, transparencies, office paper labels and 90 lb. card stock
RAMSmart advanced memory
management
improves the effectiveness of the standard memory
ColorSharp intelligent
color
enhancement eliminates tedious fine-tuning;text, graphics and images
are
automatically optimized separately, ensuring best quality across the
entire
page
Same document format,
software
support, memory and storage options as monochrome Optra S models saves
training time and costs
MarkVision network
printer management
software for easy and intuitive setup, monitoring and control
Money-saving multi-up
and toner-saver
printing modes
Supplies monitoring
feature
alerts you when paper or toners are low
Works in all major
network environments,
whether you're standardized on one or many
Supports all major color
management
systems
Prints from virtually
any software
application right out of the box:PostScript Level 2, PCL® 5 with
Color
and PCL 6 (mono) emulations are standard
Technology
-
Color laser, true four-color
process (Cyan,
Magenta, Yellow and Black)
Performance
-
12 ppm (pages per minute) black*
-
3 ppm full color*
-
1 ppm transparencies*
-
Job Overlap Processing for
optimal throughput
-
Simultaneous multiple job
printing and
processing
* Actual throughput is dependent on
computer,
application, file complexity and network traffic
Processor
-
High-performance 32-bit 66MHz
RISC Intel
i960® RISC
-
Integrated ASIC controller
speeds memory
and processor I/O
Compatibility
-
PostScript Level 2 emulation
standard
-
PCL 5 with Color emulation
standard
-
PCL XL (mono) emulation standard
-
Drivers for Windows 95, Windows
NT and
Windows 3.1x, Macintosh System 7 (LaserWriter 8 and QuickDraw GX) and
OS/2
-
Windows 95 Plug and Play
-
SmartSwitch automatic printer
language
sensing
-
State Preservation saves
resources when
switching between printer languages
Memory
-
Uses EDO RAM for maximum
performance and
reliability
-
Standard 16MB RAM on Optra SC
1275 and
32MB RAM on Optra SC 1275n
-
Expandable to 192MB RAM with
optional
SIMMs: 4MB (p/n 45H0023), 8MB (p/n 45H0024), 16MB (p/n
45H0025), 32MB (p/n 45H0026), 64MB (p/n 45H0027)
-
RAMSmart™ advanced memory
management with
job-overlap processing lets you print large or complex files with less
memory
-
Configurable I/O buffer size
-
Optional flash memory modules
for permanently
storing fonts, forms and macros: 1MB (p/n 45H0020), 2MB (p/n
45H0021), 4MB (p/n 45H0022)
-
Optional hard disk configurable
for storage
and print buffering (p/n 45H0000 adapter w/ hard disk) (p/n
45H0001
adapter w/o hard disk)
Paper
Handling
-
Standard 250-sheet feeder and
150-sheet
multipurpose tray
-
Optional 250-sheet second drawer
-
250-sheet output capacity (face
down)
-
Prints on paper 20 to 43 lb. (75
to 163
g/m2)
-
Prints on laser printer
transparencies
37 to 39 lb. (Lexmark Color Laser Transparencies (p/n 1053740)
recommended
for best print quality)
-
Prints on paper labels designed
for laser
printers
-
Prints on card stock to 163g/m2
(up to
90 lb. index and 100 lb tag)
-
Paper sizes: Letter, legal
(monochrome
only), A4, A5, B5, Executive
Connectivity
-
High-Speed Bidirectional
Parallel Port
(IEEE 1284/ECP compliant)
-
Ethernet 100BaseTX/10BaseT
standard on
Optra SC 1275n (occupies one Internal Solutions Port)
-
Three PCI-based Internal
Solutions Ports
(ISP) which support the following options:
-
Tri-Port Adapter (p/n
44H0008)
with concurrent support for the following:
-
Serial RS-232C/RS-422
-
LocalTalk
-
IrDA-compliant High Speed
1Mbps Infrared
(requires the Infrared Adapter p/n 44H0009)
-
MarkNetTM S
internal network
adapters:
-
Ethernet 100BaseTX and
10BaseT using Intel
EtherExpress Pro/100 technology with auto-speed negotiation (p/n
44H0003)
-
Ethernet 10Base2 and 10BaseT
with auto-media
detection (p/n 44H0005)
-
Token-Ring using IBM PCI
Token-Ring Adapter
technology 4/16Mbps with auto-ring speed detection UTP and STP with
auto-media
detection (p/n 44H0001)
-
Coax/Twinax Adapter for SCS for
connectivity
to IBM 3270 and 5250 environments (p/n 44H0011)
-
Hard disk for job buffering (see
Memory
above, for p/ns)
MarkNet S
Protocols
and Network Operating System Support
-
MarkNet S Adapters support the
following
protocols:
-
TCP/IP
-
LexLink (DLC/LLC)
-
Novell (IPX/SPX, including
full support
for NetWare Directory Service - NDS)
-
AppleTalk (EtherTalk and
TokenTalk)
-
Complete TCP/IP support is
provided via
a set of standard application services:
-
DHCP, WINS, http, lpr/lpd,
ftp, tftp,
finger, ping, telnet, bootp, rarp, and SNMP—MIB II and industry
standard
printer MIB (RFC1759)
-
The following network operating
systems
are directly supported:
-
Novell NetWare (including full
NDS support)
-
Microsoft Windows NT Server
3.1, 3.5,
3.51 and 4.0
-
Microsoft Windows 95
(Peer-to-Peer) Networking
-
IBM OS/2 Warp (LAN) Server
-
IBM OS/400 V3R1 or V3R6 and
later with
LexLink or TCP/IP
-
AppleTalk (TokenTalk or
EtherTalk)
-
Virtually any platform that
supports TCP/IP
printing
-
Various UNIX platforms with
TCP/IP
To assist in the MarkNet
S remote setup, MarkVision for UNIX Networks and MarkVision for UNIX
Intranet
Servers are recommended. (Licensed program product p/n 13A2120)
UNIX platforms include: AIX, NCR, HP-UX, SCO, Sun Solaris x86, Sun
Solaris,
SunOS, Silicon Graphics, UnixWare
Management
and
Control
-
MarkVision Printer Management
Utility
for the following client environments: Windows 3.1x, Windows 95,
Windows
NT 4.0, OS/2 Warp, Mac OS and UNIX
-
WWW browser-based intranet and
Internet
printer management:
-
MarkVision for the UNIX
Intranet Servers
(requires MarkVision for UNIX Networks)
-
MarkNet S with embedded html
and http
protocol support
-
Support for open printer
management standards
-
SNMP—MIB II and
industry-standard printer
MIB (RFC 1759)
-
Industry-standard printer MIB
ensures
support for virtually any SNMP-based network management application
-
MarkVision automatically
integrates into
the following network management applications:
-
Novell ManageWise
-
HP OpenView for Windows
-
HP OpenView Network Node
Manager
-
IBM NetView/6000, SystemView
for AIX
-
Tivoli (IBM) TME10 NetFinity
for OS/2
-
Tivoli (IBM) TME10 for AIX
Font
Selection
-
75 scalable fonts in PostScript
Level
2 and PCL 5 emulations
-
45 scalable fonts in PCL 6
emulation
-
2 bitmapped fonts
-
World-class international font
support
-
FontVisionTM font
management
utility available to registered users
Maximum
Printable
Line
-
Length
-
Color: 10.67" (288mm)
-
Black: 13.66" (346mm)
-
Width: 8.17" (204mm)
Usability
Features
-
Automated supplies monitoring
for replacement
warning
-
User-selectable Toner Saver mode
for lower-cost
draft printing
Size/Weight
-
19.8" W x 20.75" D x 15.87" H
(502.9mm
x 527.1mm x 403.1mm) / 77 lbs. (35 kg)
Acoustics
-
55 dBA (operating) / 39 dBA
(idle)
Cables
-
Lexmark recommends the following
(a cable
is not included with the printer):
-
50-foot Serial Printer Cable, (p/n
1038693)
-
10-foot Parallel Cable (p/n
1329605)
-
20-foot Parallel Cable (p/n
1427498)
Supplies
-
250-sheet second drawer
assembly, letter
(p/n 11C0157)
-
250-sheet paper tray (p/n
11C0198)
-
Printer Cabinet (p/n 43H2950)
-
Black Cartridge 4,500 pages at
5% coverage
(p/n 1361751)
-
Cyan Cartridge 3,500 pages at 5%
coverage
(p/n 1361752)
-
Magenta Cartridge 3,500 pages at
5% coverage
(p/n 1361753)
-
Yellow Cartridge 3,500 pages at
5% coverage
(p/n 1361754)
-
Photoconductor Kit, including
waste toner
bottle and fuser coating roll—up to 20,000 images (p/n 1361750)
-
Transparencies (p/n 1053740)
-
Optra Multimedia Assistant on
CD-ROM (p/n
10MV050)
Duty Cycle
-
Maximum of 20,000 pages per
month, based
on a single month's use
|
|
 |