40 ppm. 200,000 duty cycle. 300, 600, 1200 image quality.

1352 (4528-001)	1352n (4528-N01)
4528-001 IBM Infoprint 1352 (New) 4528-001 refurbished $795	4528-N01 IBM Infoprint 1352n (NEW) 4528-N01 refurbished $995

Warranty Options:

14R0842 4528-ALL 1 YEAR EZS 9X5ND
14R0842 4528 Exchange 9 x 5 Next Day
$201

14R0844 4528-ALL 1 YEAR IOR 9X5ND
14R0844 4528 IBM Onsite Repair warranty 9 x 5 Next Day
$313

14R0846 4528-ALL 1 YEAR IOR 24X7SD
14R0846 4528 IBM Onsite Repair, 4 hour response 24 x 7 Same Day
$626

Acquire the versatility you need for your active business with a 350 MHz processor and numerous connectivity options. To support higher productivity, add optional duplex and finishing capabilities. With the monochrome Infoprint® 1352, you can protect your investment and consider device consolidation because you can upgrade it to include scan, copy and fax functionality

Infoprint 1352 At a Glance
Maximum speed
Print		up to 40 pages per minute (ppm)
First page out		as fast as 10 seconds
Technology/processor:		Monochrome laser/350 MHz
Maximum monthly usage:		200,000 pages
Print Resolution		300, 600, 1200 image quality; 1200 dpi at a slower speed
Memory (std/max)
Base		64/320 MB
Network		64/320 MB
Paper handling
Standard/max input capacity		600/4,100
Input options		Up to four additional drawers: 250-, 400-, 500- and 2,000-sheet drawers available. Only one 2,000-sheet drawer can be installed.
Standard/max output capacity		500/3,000
Output Options		Up to three of the following output options: output expander (up to 650 sheets); StapleSmart Finisher (up to 750 sheets unstapled, 600 sheets stapled); high-capacity output stacker (up to 1,850 sheets); five-bin mailbox (up to 100 sheets per bin)
Standard datastreams:		PostScript Level 3 emulation, PCL6 emulation, PDF v1.2, PDF v1.3 and PPDS
Application solutions:		IPDS, ImageQuick, Optra Forms, Bar Code Card, Decryption Card
Printer attachments
Standard		USB port, bidirectional parallel port (base); USB port, Ethernet 10BaseT/100BaseTX (n)
Optional internal attachments		Ethernet 10/100 BaseTX; Token Ring; Twinax/Coax adapter for SCS; Serial; Parallel
Optional external attachments		Ethernet ; Token Ring; Serial adapter; Wireless Ethernet (802.11b) and Bluetooth

This printer supports a robust line of networking options, which includes Fast Ethernet, Token-Ring, Twinax, and Coax. All models have a Universal Serial Bus (USB) port standard for local connections and optional parallel, and serial connections are available. The base model additionally comes with parallel standard. In terms of datastreams, the capability to integrate PCL 6 and PostScript 3 emulation, Page Printer Data Stream (PPDS), and PDF v1.2 and PDF v1.3 come standard; Intelligent Printer Data Stream (IPDS) is optional.

Infoprint 1352 Printer

The Infoprint 1352 is a monochrome printer that supports up to A4/Letter-size media at up to 40 pages per minute (PPM).

Infoprint 1352 Models

The printer comes in base models, and network models.

All models have a maximum input capacity of 4,100 sheets and a maximum output capacity of 3,000 sheets.

The Infoprint 1352 has special models for the U.S. government. Model 004 is the base low-voltage model and 005 is the base high-voltage model. Model n04 is the network low-voltage model and n05 is the network high-voltage model.

High Performance Controller

The Infoprint 1352 controller features a 350 MHz processor. It comes with Post 3 and PCL emulation, PDF v1.2 and v1.3 as standard data streams and a PPDS migration tool.

• Memory:

  The controller has two slots for memory DIMMs, two slots for flash memory cards or application solution cards, and two slots for internal network adapters or local adapters.

  The base models come with 64 MB of memory soldered onboard and can support a maximum of 320 MB of memory with two 128 MB DIMMs installed. The network models come with 64 MB of memory soldered onboard and can support a maximum of 320 MB of memory with two 128 MB DIMMs installed. A 20+ GB hard disk with adapter feature is available.

  Flash memory up to 32 MB is supported using the flash memory cards. Flash memory cards can be installed in either flash memory slot, but the controller supports only one flash memory card.

• Printer System Attachment Interfaces:

  The base models come with an IEEE 1284 Parallel interface with a type B connector and a Universal Serial Bus (USB) interface as standard.

  The network models come with a USB interface, and a 10/100BaseTX Fast Ethernet interface as standard. It does not have a Parallel interface. The standard Fast Ethernet interface does not take up a network adapter slot. Wireless Ethernet is supported through the wired Ethernet port on either the base model with the Ethernet option installed or the network models.

Usage Rates

The maximum monthly usage is 200,000 impressions. IBM does not recommend printing to the monthly maximum on a consistent basis.

Print Quality

The resolutions of the Infoprint 1352 are:

The Toner Darkness setting offers 10 user-selectable settings to balance print darkness and toner savings. The higher the setting, the darker the print. Within the range of print darkness settings, up to 50% toner savings can be realized. The factory default setting is 8.

Font Support

The Infoprint 1352 printers' resident fonts include support for following:

Emulation Number of Scalable Fonts Number of Bitmapped Fonts
------------ ------------------------ -------------------------
PCL 6 89 2
PostScript 3 158 0
PPDS 39 5
 
Media Handling Features

The Infoprint 1352 supports the following media handling options:

Accessibility by People with Disabilities

For Hardware Offerings

The following features support use by people with disabilities:

• Controls and latches are operable with one hand and minimal dexterity.
• Keys are discernible by touch without activating them.
• The display, controls, latches, and levers are accessible to someone in a wheel chair.
• Color is used as an enhancement for conveying information, and as an additional method of distinguishing between buttons, controls, and latches.

Model Type Voltage Special
----- ------- ------- ----------
 001 Base Low -
 N01 Network Low -
 004 Base Low Government
 N04 Network Low Government
 005 Base High Government
 N05 Network High Government
 

Hardware Options

Mach Feature Part
Type Model Number Number Description UPC
---- ----- ------- ------- ------------------------------ ---------------
 53P7947 250-Sheet Duplex Unit 0-87944-85139-4
 53P7946 500-Sheet Duplex Unit 0-87944-85138-7
 53P7949 250-Sheet Duplex Unit(Gov Kit) 0-87944-85255-1
 53P7948 500-Sheet Duplex Unit(Gov Kit) 0-87944-85254-4
 28P1979 250-Sheet Tray 0-87944-67818-2
 28P1980 500-Sheet Tray 0-87944-67819-9
 28P1983 250-Sheet Drawer 0-87944-67816-8
 28P1984 500-Sheet Drawer 0-87944-67817-5
 28P1988 2000-Sheet Drawer (Letter) 0-87944-67820-5
 28P1989 2000-Sheet Drawer (A4) 0-87944-67821-2
 28P1987 Envelope Feeder 0-87944-67823-6
 28P1990 Output Expander 0-87944-67824-3
 28P1994 5-Bin Mailbox 0-87944-67825-0
 28P1993 High Capacity Output Stacker 0-87944-67826-7
 28P1991 StapleSmart Finisher 0-87944-67827-4
 28P1981 250-Sheet Universal Tray 0-87944-67830-4
 28P1982 400-Sheet Universal Tray 0-87944-67828-1
 28P1985 250-Sheet Universal Adj. Drawer0-87944-67831-1
 28P1986 400-Sheet Universal Adj. Drawer0-87944-67829-8
 53P7601 8 MB Memory DIMM 0-87944-82183-0
 53P7602 16 MB Memory DIMM 0-87944-82230-1
 53P7603 32 MB Memory DIMM 0-87944-81970-7
 53P7604 64 MB Memory DIMM 0-87944-81971-4
 53P7605 128 MB Memory DIMM 0-87944-81972-1
 28P1862 Optra Forms* Software 0-87944-67844-1
 28P1863 Optra Forms* Director Software 0-87944-67845-8
 53P9307 Optra Forms* Manager 0-87944-72539-8
 28P1869 Optra Forms* 2-Key Security 0-87944-67850-2
 28P1870 Optra Forms* 3-Key Security 0-87944-67851-9
 28P1842 Coax/Twinax Adapter for SCS 0-87944-73644-8
 28P1836 Token-Ring-3 Port 0-87944-67906-6
 28P1839 Ethernet 10/100BaseTX-1 Port 0-87944-67903-5
 28P1840 Ethernet 10/100BaseTX-3 Port 0-87944-67905-9
 28P1841 Ethernet 10/100TX/10Base2-1 Pt 0-87944-67904-2
 53P7854 802.11b Wireless Adapter 0-87944-83617-9
 28P1845 External Serial Adapter 0-87944-67911-0
 28P1871 10 ft. Parallel Cable 0-87944-67916-5
 28P1872 20 ft. Parallel Cable 0-87944-67917-2
 28P1874 50 ft. Serial Cable 0-87944-67919-6
 28P1875 2-meter USB Cable 0-87944-67918-9
 53P7950 Printer Stand with Cabinet 0-87944-85382-4
 53P7951 Printer Stand 0-87944-85383-1
 53P7952 Low-Profile Printer Stand 0-87944-85384-8
 53P7953 Scanner Stand with Cabinet 0-87944-85385-5

The Infoprint 1352 maximum print speeds are shown in the following table. Actual performance depends on:

Continuous Print Speeds in pages-per-minute (ppm) are shown in the following table:

Infoprint 1352

300, 600,
Media 1200IQ 1200 dpi
-------- ---------- ---------
Simplex
- Letter 40.1 ppm 21.5 ppm
- A4 38.0 ppm 20.4 ppm
- Legal 32.8 ppm 17.4 ppm

Duplex
- Letter 33.2 spm 19.2 spm
- A4 31.6 spm 18.3 spm
- Legal 27.8 spm 15.8 spm

Time to First Print values are shown in the following table:

 Time from Time from
Input Source Standby Mode Power Saver Mode
-------------- ------------ ----------------
Auxiliary Tray sec. sec.
Tray 1 <10 sec. 42 sec.
Tray 2 sec. sec.
 
Print Area

The Infoprint 1352 printable area is limited to within 4.2 mm (0.167 in.) of top, bottom, left or right edges of the media. Any information placed outside this specified printable area will not print.

Print Quality

General Statement on Print Quality

During the life of the printer, components are subject to wear based on usage. Printers continuously operating at or near the maximum duty cycle may require service for replacement of these components to ensure high quality printing and good performance throughout the life of the printer.

Data Streams

The Infoprint 1352 supports the following data streams:

Fonts

Fonts and Symbol Sets

The fonts in PCL emulation are compatible with the fonts in the HP4500 and include nine additional fonts and many extra symbol sets to support extra languages and applications. The fonts in the PostScript emulation are compatible with all 136 fonts in Adobe PostScript 3 and include 22 additional fonts.

Additional fonts can be downloaded to the printer RAM or optional Flash memory. PCL emulation supports both scalable and bitmapped downloadable fonts. PostScript emulation supports only downloadable scalable fonts. Font cards and font cartridges are not supported.

Media Support

Infoprint 1352

All models come standard with one 500-sheet paper drawer and a 100-sheet auxiliary tray. One 500-sheet output bin is standard. See tables below for standard and maximum media capacities.

Input Media Combinations and Capacities (sheets)

 Standard Optional Optional Optional Optional Total
 Aux. Tray Drawer 1 Drawer 2 Drawer 3 Drawer 4 Drawer 5 Capacity
 --------- -------- -------- -------- -------- -------- --------
Standard 100 500 600
Maximum 100 500 500 500 500 2000 4100
 

Output Media Capacities (sheets)

 Optional Optional Optional
 Standard Output 5-Bin Optional High-cap Total
 Output Bin Expander Mailbox Finisher Stacker Capacity
 ---------- -------- -------- -------- -------- --------
Standard 500 500
 
Maximum with 500 3x650 2450
Expander(1)
 
Maximum with 500 2x500 1500
Mailbox(2)
 
Maximum with 500 650 750 1900
Finisher(3)
 
Maximum with 500 650 1850 3000
High-cap stacker(4)
 

Note: (1) Maximum of three Output Expanders can be installed.

Note: (2) Maximum of two 5-bin Mailboxes can be installed.

Note: (3) Maximum of one Staplesmart Finisher and either one Output Expander or one 5-bin Mailbox can be installed. The Staplesmart Finisher and High-Capacity Output Stacker are mutually exclusive.

Note: (4) Maximum of one High-Capacity Output Stacker and one Output Expander can be installed. The 5-Bin Mailbox cannot be installed with the High Capacity Output Stacker.

Media Sizes Supported

Media Capacity for Infoprint 1352

 Stack
Source Media Height Reference Capacity
---------------------- --------------- ------ --------------------
Inputs
 - 250-Sheet Tray(2)
 Plain Paper(1) 25 mm 250 sheets (75 gsm)
 Transparencies 225 transparencies
 Paper labels 100 paper labels(3)
 
 - 500-Sheet Tray(2)
 Plain Paper(1) 55 mm 500 sheets (75 gsm)
 Transparencies 450 transparencies
 Paper labels 200 paper labels(3)
 
 - 2000-Sheet Tray(2)
 Plain Paper(1) 212 mm 2000 sheets (75 gsm)
 Transparencies NA NA
 Paper labels NA NA
 
 - Envelope Feeder(2)
 Envelopes 64.7mm 85 envelopes (75 gsm)
 
 - Auxiliary Tray(2)
 Plain Paper 10 mm 100 sheets (75 gsm)
 Envelopes 10 envelopes (75 gsm)
 Paper labels Various quantities
Outputs
 - 500-sheet Output(1),(2)
 Plain Paper 85 mm 500 sheets (75 gsm)
 Transparencies 300 transparencies
 Paper labels 200 paper labels(3)
 Envelopes 50 envelopes (75 gsm)
 
 - Output Expander(1),(2)
 Plain Paper 80 mm 650 sheets (75 gsm)
 Envelopes 50 envelopes (75 gsm)
 (6)
 - 5-Bin Mailbox(1),(2),(7)
 Plain Paper 15 mm 100 sheets (75 gsm)
 Envelopes NA
 
 - High Capacity Output(1),(2)
 Plain Paper 200 mm 1850 sheets (75 gsm)
 Envelopes Various quantities(5)
 
 - Staplesmart Finisher
 Plain Paper 750 sheets (75 gsm)
 unstapled
 

Note: (1) 20 lb xerographic paper at ambient environment.

Note: (2) Capacity may vary and is subject to media specs and operating environment.

Note: (3) Capacity will vary with label material and construction.

Note: (4) Capacity will vary depending on weight and type of media.

Note: (5) Stack height will not reach max. due to weight of envelopes concentrated on one side of option tray.

Note: (6) Estimate based on capacity of 500-sheet output bin.

Note: (7) Available on Infoprint 1352 only.

Input Media for Infoprint 1352

 250 1 250- 400-
 500- Sheet Sheet 2000-
 Tray Sheet Univ. Univ. Sheet Env.
Paper Size & Type Aux. 1/2 Tray Tray Tray Drawer Feed
----------------------- ---- ---- ----- ----- ----- ------ ----
A4 (210x297 mm) Yes Yes Yes No No Yes No
Letter (8.5"x11") Yes Yes Yes No No Yes No
A5 (148x210 mm) Yes Yes Yes No No Yes No
B5-JIS (182x257 mm) Yes Yes Yes No No Yes No
Legal (8.5"x14") Yes Yes Yes No No Yes No
Executive (7.25"x10.5") Yes Yes Yes@ No No Yes No
Folio (8.5"x13") Yes Yes Yes No No No No
Statement (5.5"x8.5") Yes Yes Yes No No No No
7 3/4 Env. (98x191 mm) Yes No No No No No Yes
9 Env. (98x225 mm) Yes No No No No No Yes
Commercial #10 Env. Yes No No No No No Yes
 (104.8x241.3 mm)
C5 Env. (169x229 mm) Yes No No No No No Yes
B5 Env. (176x250 mm) Yes No No No No No Yes
DL Env. (110x220 mm) Yes No No No No No Yes
Other Env.(1) Yes No No No No No Yes
Universal(2) Yes Yes Yes Yes Yes No No
Universal(3) Yes No No Yes Yes No No
Universal(4) Yes Yes Yes Yes Yes No No
Paper Yes Yes Yes Yes Yes Yes No
Transparencies Yes Yes Yes Yes Yes No No
Cardstock Yes Yes Yes Yes Yes No No
Paper Labels Yes Yes Yes Yes Yes No No
 

Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.).

Note: (2) Size 139.7x210mm to 215x355.6mm (5.5x8.27 in. to 8.5x14 in.).

Note: (3) Size 69.85x127mm to 215.9x355.6mm (2.75x5 in. to 8.5x14 in.).

Note: (4) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).

Output Media for Infoprint 1352

 Std 5-bin high- Fin. Fin.
 Out. Output Mail cap. Output Staple
Paper Size & Type Dup. Bin Expand box(5) Stack Bin. Jogger
----------------------- ---- ---- ------ ----- ----- ------ ------
A4 (210x297 mm) Yes Yes Yes Yes Yes Yes Yes
Letter (8.5"x11") Yes Yes Yes Yes Yes Yes Yes
A5 (148x210 mm) Yes Yes Yes No Yes No No
B5-JIS (182x257 mm) Yes Yes Yes Yes Yes Yes No
Legal (8.5"x14") Yes Yes Yes Yes Yes Yes Yes
Executive (7.25"x10.5") Yes Yes Yes Yes Yes Yes No
Folio (8.5"x13") Yes Yes Yes Yes Yes Yes Yes
Statement (5.5"x8.5") No Yes Yes No Yes No No
7 3/4 Env. (98x191 mm) No Yes Yes No Yes No No
9 Env. (98x225 mm) No Yes Yes No Yes No No
Commercial #10 Env. No Yes Yes No Yes No No
 (104.8x241.3 mm)
C5 Env. (169x229 mm) No Yes Yes No Yes Yes No
B5 Env. (176x250 mm) No Yes Yes No Yes Yes No
DL Env. (110x220 mm) No Yes Yes No Yes No No
Other Env.(1) No Yes Yes No Yes No No
Universal(2) No Yes Yes No Yes No No
Universal(3) No Yes Yes No Yes No No
Universal(4) Yes Yes Yes No Yes No No
Paper Yes Yes Yes Yes Yes Yes Yes
Cardstock Yes Yes Yes No Yes Yes Yes@
Transparencies No Yes Yes No Yes Yes Yes@
Paper Labels No Yes Yes No Yes No No
 

Note: @ Supported by offsetting only, not stapler function.

Note: Dup = Duplex.

Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.).

Note: (2) Size 139.7x210mm to 215x355.6mm (5.5x8.27 in. to 8.5x14 in.).

Note: (3) Size 69.85x127mm to 215.9x355.6mm (2.75x5 in. to 8.5x14 in.).

Note: (4) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).

Media Type and Weights Supported

Input Media for Infoprint 1352

 Aux & 250-Sht 500-Sheet tray
Print Media (5) (6) 2000-Sht Drwr Env. Feeder
------------------ ------------- -------------- ------------- -----------
Copier/Xerographic 60-135 gsm 60-176 gsm 60-135 gsm No
 16-36 lb 16-47 lb 16-36 lb
 
Card Stock Upper
Limit grain Long(1)
- Index-Bristol 120 gsm (67lb) 163 gsm (90lb) No No
- Tag 120 gsm (74lb) 163 gsm (100lb) No No
- Cover 135 gsm (50lb) 176 gsm (65lb) No No
 
Card Stock Upper
Limit grain Short(1)
- Index-Bristol 163 gsm (90lb) 199 gsm (110lb) No No
- Tag 163 gsm (125lb)203 gsm (125lb) No No
- Cover 176 gsm (65lb) 216 gsm (80lb) No No
 
Transparencies 138-146 gsm 138-146 gsm No No
 37-39 lb 37-39 lb No No
 
Labels Upper Limit
- Paper 163 gsm (43lb) 180 gsm (48lb) No No
 
Integrated Forms
- Pressure Area(2) 140-175 gsm 140-175 gsm No No
- Paper Base 75-135 gsm 75-135 gsm No No
 20-36 lb 20-36 lb
 
Envelopes(5) 60-105 gsm No No 60-105 gsm
(Sulfite, wood-free 16-28lb bond(3) 16-28 lb(4)
or up to 100%
cotton bond)
 

Note: All media specified in lb is bond.

Note: (1) For 60 to 176 g/m2 paper, grain long fibers are recommended. For papers heavier than 176 g/m2, grain short is preferred.

Note: (2) Pressure sensitive area must enter the printer first.

Note: (3) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond envelopes are limited to 25% cotton content. This spec applies to the auxiliary tray, not the optional 250-sheet drawer.

Note: (4) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond. envelopes are limited to 25% cotton content.

Note: (5) The duplex option supports the same weights and types as the printer except for transparencies, envelopes, and labels. Integrated trays include the standard 500 tray and the 400-UAT tray in the integrated tray position.

Note: (6) Optional 250-drawers include the 250-UAT drawer. Optional 500-drawers include the 400-UAT drawer.

Output Media for Infoprint 1352

Print Media Std/Expd/Stak Finisher Bin Fin stple/Off Mailbox(5)
------------------ ------------- -------------- ------------- -----------
Copier/Xerographic 60-176 gsm 60-176 gsm 60-90 gsm 60-90 gsm
 grain long, 16-47 lb 16-24 lb 16-24 lb
 16-47 lb
 
Card Stock Upper
Limit grain Long(1)
- Index-Bristol 163 gsm (90lb) 163 gsm (90lb) No No
- Tag 163 gsm(100lb) 163 gsm (100lb) No No
- Cover 176 gsm (65lb) No No No
 
Card Stock Upper
Limit grain Short(1)
- Index-Bristol 199 gsm (110lb)199 gsm (110lb) No No
- Tag 203 gsm (125lb)203 gsm (125lb) No No
- Cover 216 gsm (80lb) 216 gsm (80lb) No No
 
Transparencies 138-146 gsm 138-146 gsm Offsetting No
 37-39 lb 37-39 lb 138-146 gsm No
 37-39 lb
Labels Upper Limit
- Paper 180 gsm (48 lb) No No No
 
Integrated Forms
- Pressure Area(2) 140-175 gsm No No No
 up to 47 lb
- Paper Base 75-135 gsm No No No
 (long grain) 20-36 lb
 
Envelopes 60-105 gsm No No No
(Sulfite, wood-free 16-28 lb bond(3)(4)
or up to 100%
cotton bond)
 

Note: All media specified in lb is bond.

Note: (1) For 60 to 176 g/m2 paper, grain long fibers are recommended. For papers heavier than 176 g/m2, grain short is preferred.

Note: (2) Pressure sensitive area must enter the printer first.

Note: (3) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond envelopes are limited to 25% cotton content. This spec applies to the auxiliary tray, not the optional 250-sheet drawer.

Note: (4) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond envelopes are limited to 25% cotton content.

Note: (5) Not supported on Infoprint 1332.

Paper Sensing for Infoprint 1352

 Standard Optional Optional Optional
 Input 250/500 2000-Sht. Envelope
Sensing Function Trays Drawers Drawer Feeder
--------------------------- --------- -------- --------- --------
Paper Size Sensing
 Paper Tray Yes Yes Yes No
 Auxiliary Tray No No No No
Paper Out Sensing
 Paper Tray Yes Yes Yes Yes
 Auxiliary Tray Yes No No No
Tray Present Sensing
 Paper Tray Yes Yes Yes No
 Auxiliary Tray No No No No
Envelope Conditioning Yes No No No
Misc. Other
 Narrow Media Yes No No No
 Auto Size Yes No No No
 Tray Low Yes Yes No No
 Pass Through No Yes Yes Yes
 Cover Open/
 Cartridge Present Yes No No No
 Input Sensor Yes No No No
 Fuser Exit Yes No No No
 

 Optional Optional Optional
 Output 5 -Bin High-Cap. Optional
Sensing Function Expander Mailbox Stacker Finisher
--------------------------- --------- -------- --------- --------
Output Bin Near Full Yes No Yes Yes
Output Bin Full Yes Yes Yes Yes
Output Bin Empty No Yes No Yes
Envelope Conditioning
Misc. Other
 Pass Through Yes Yes Yes Yes
Stapling Sensing
 Paper In Stapler No No No Yes
 Stapler Low No No No Yes
 Staple Cartridge Present No No No Yes
 Stapler Empty No No No Yes
 Stapler Top Cover No No No Yes
 Stapler Access Door No No No Yes
 

Additional Media Guidelines for Infoprint 1352

Follow the media guidelines below for successful printing:

Paper

• Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.
• Colored papers must be able to withstand 190 deg C (400 deg F) fusing temperature.
• Preprinted forms and letterheads should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with these printers.
• Unsuitable papers include multipart forms and documents; chemically treated papers; coated, synthetic and thermal papers; and preprinted papers requiring a high degree of registration.
• Recycled paper less than 80g/sqm may cause unacceptable results.

Envelopes

• All envelopes should be new, unused, and without package damage.
• Envelopes with excessive curl or twist exceeding 6 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.
• Minimum weight: 75 g/m2 (20 lb.)
• The following envelopes should not be used:
  • Envelopes with windows, holes, perforations, cutouts, or deep embossing.
  • Envelopes with metal clasps, string ties, or metal folding bars.
  • Envelopes with exposed flap adhesive when the flap is in the closed position.
  • For best results, printing on new 90 g/m2 (24 lb.) sulfite or 25% cotton bond envelopes is recommended.
  • Under high humidity conditions (over 60%), envelopes may seal during printing.

Transparencies

• Use letter or A4-size sheets only.
• Transparencies specifically designed for xerographic copy machines or laser printers may be used with the Infoprint 1352.

Labels

Labels should be selected using guidelines found in the User's Reference, Complete Printer Reference, and tested for acceptability. VINYL AND POLYESTER LABELS ARE NOT SUPPORTED.

Differences Between These Printer's IPDS and Previous IBM Printers

These workgroup printers have a different level IPDS support than the previous IBM workgroup printers. Some key differences are:

• For emulation, the Infoprint 1000 Series printers emulate the 4028, 4312, 4317, 4324, 3812/16, and 3112/16. These are LF1 emulations ONLY.
• Infoprint 1352 printers do not support "Manage IPDS Dialog".

Details on Card for IPDS and SCS/TNe Emulation

Product Overview:

• The SCS/TNe or IPDS configuration settings can be changed using MarkNet print server's resident web server, a browser and the printer's IP address.
• For IPDS emulation printing, the capture of outline fonts (LF3) is now supported.

These affordable Cards for IPDS and SCS/TNe provide configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers. These Cards for IPDS and SCS/TNe are compatible with IBM mainframe or IBM iSeries applications that generate SCS (LU1) output or with applications that output AFP/IPDS through Print Services Facility (PSF).

IBM continues to make it easy for IS/IT managers to have an affordable printing solution in a distributed network or on a LAN for applications or software that generate AFP/IPDS or SCS. This includes:

• PDF417 2D bar code, Data Matrix, MaxiCode 2D bar code support
• Using AFP/IPDS and PSF, capture fonts to hard disk or to flash memory resulting in reduced network traffic over LAN, coaxial or twinaxial connections.
• Supports TN3270E or TN5250E SCS (LU1) over the LAN using TCP/IP with Telnet.
• No changes to host applications.
• Supports emulation of common IBM IPDS and SCS printers.
• Additional or new remote controllers with twinax or coax cabling are unnecessary. However, twinax and coax connections continue to be available using the Coax/Twinax Adapter for SCS.
• One LAN printer can print LAN (PostScript, PCL, etc) and mainframe or iSeries documents (AFP/IPDS, SCS).

With a card and the standard Ethernet network port or a MarkNet print server using TCP/IP, the printer becomes an IBM host workstation printer capable of printing AFP/IPDS or SCS documents from an iSeries or System/390 computer.

With the appropriate host software and one of these options, the IBM printer emulates an IBM mainframe or iSeries host printer. See the compatibility section for details.

With the TN3270E and TN5250E extended Telnet protocol support in these options, the printer emulates one TN3270E printer session and up to 4 TN5250E printer sessions using the LU1 SCS data stream over TCP/IP. This is supported directly from an iSeries or from a mainframe using TCP/IP or through any TN3270E capable gateway that supports TN3270E according to RFC 2355. The DSC/DSE or SCS data streams over LU3 or LU0 are not supported. The Telnet protocol function is only supported with through the standard Ethernet network port or with the MarkNet N2000 print servers. See the compatibility section for more details.

For IPDS emulation, the card supports resident scalable fonts and 300, 600, 1200 image quality or 1200 dpi (except Infoprint 1145) print resolutions. The resolution is selected through an IPDS MENU setting. This setting determines the print resolution of IPDS text, graphics, bar code, scalable image and scalable font data.

The printer can be configured to take advantage of additional RAM, and when attached to a LAN through the standard Ethernet port or a MarkNet print server, can save IPDS resources to improve performance for complex IPDS print jobs with host resources such as fonts, overlays or page segments.

The IPDS emulation supports the IPDS data and resource towers. SBCS fonts can now be downloaded, captured and saved to hard disk or flash memory in the printer. The US Postal Bar code POSTNET font and the Euro currency symbol are supported within IPDS.

The Euro currency symbol is also supported for the SCS, PostScript and PCL 6 emulations.

Fonts

AFP/IPDS Font and Typestyle Support:

The Card for IPDS supports resident scalable fonts. The font complement with 12 typestyles supports the IBM Font Collection (Core Int erchange Scalable Font Sets - Courier, Times New Roman and Helvetica faces).

The following languages are supported:

• Latin 1: Afrikaans, Belgian (French and Dutch), Brazilian Portuguese, Canadian English, Canadian French, Catalan, Danish, Dutch, Finnish, French, German, Icelandic, Italian, Latin American Spanish, Norwegian, Portuguese, Spanish (Castillian), Swedish, Swiss (German, French and Italian), United Kingdom English, United States English
• Latin 2/ROECE: Albanian, Croatian, Czech, East German, Hungarian, Polish, Romanian, Serbian, Slovak, Slovenian
• Latin 3, 4, 5 and 6: Maltese, Turkish, Estonian, Greenlandic, Lappish, Latvian, Lithuanian
• Greek
• Cyrillic for: Bulgarian, Byelorussian, Macedonian, Russian, Serbo-Croatian, Ukrainian.

The font complement for the IBM Coordinated Scalable Font Set provides support for Latin 1 languages in 3 Letter Gothic (medium, bold and italic) and 3 Prestige (medium, bold and italic) scalable typestyles. Scalable OCR-A and OCR-B typestyles are supported.

The following fonts are supported using bitmaps: APL 12, Boldface PS, Boldface Italic PS, OCR-A 10, OCR-B 10 and Prestige PS. The OCR bitmap fonts have different FGIDs than the scalable font versions.

The IBM 4028 Compatibility Font set consists of 22 fixed pitch typestyles supported by bitmap fonts. Times Roman typestyles (13) are created from Times New Roman scalable typestyles of the same weight and style.

The IBM 3812/3816 Compatibility Font set consists of 35 typestyles supported by bitmap fonts at 240 dpi.

Font Capture

Fonts can also be captured dynamically and saved (cached) to hard disk or flash memory in the printer. A captured font then appears as a printer resident font. If many fonts are used in the jobs that are printed, capturing fonts and saving them in the printer will decrease network traffic on busy networks.

PSF defines fonts as either public or private. In order to capture a font, it must be marked as eligible and public. A private font is not eligible to be captured.

Note: Do not mark sensitive fonts such as signatures and MICR fonts as eligible to be captured. Check the font licensing information before a font is made eligible for capture.

If a font is to be captured, the appropriate files for the coded font or character set and code page resources must all be marked.

The printer must also be defined as capable to capture fonts in PSF. For bitmap fonts, the font resolution of the font captured must match the resolution of the emulated printer for it to be recognized by the printer as a printer resident font. For example, the IBM 3812 and 3816 printer emulations require 240 dpi fonts. The IBM 4028 printer emulation requires 300 dpi fonts.

iSeries

On the iSeries, Font capture is supported by OS/400 V5R1 or later. To define the printer as capable to capture, in the PSF configuration (CRTPSFCFG/CHGPSFCFG), set FNTCAPTURE (*YES).

Eligible fonts must be marked. Display the font attributes to identify marked fonts (DSPFNTRSCA). Verify that *YES is specified for the Font Capture attribute. Use Create Font Resource (CRTFNTRSC) to mark font resources from other systems. Use Change Font Resource (CHGFNTRSC) to mark fonts that are not marked as eligible.

For a font to be eligible for capture, it must have non zero fields for FGID and GCSGID. Any fonts captured and saved in the printer's hard disk or flash memory are saved across instances of the writer.

Mainframe (OS/390 or z/OS)

Font capture is supported by PSF for OS/390 or z/OS. Use APSRMARK to mark eligible fonts if they are not already marked. The IBM Font Collection fonts are already marked as eligible for capture.

SCS Font and Typestyle Support

The SCS emulation uses the default resolution set using the Quality menu from the printer's operator panel. The SCS emulation in the card uses PCL fonts from the printer firmware. If the printer is set to 600 dpi, then all SCS data is printed with 600 dpi PCL fonts. It is possible to imbed PCL and PJL commands into the SCS data stream and pass them to the printer utilizing ASCII transparency.

On the iSeries, fonts can be selected by specifying the FGID (Font Global Identifier) or by characters per inch (CPI). With IBM mainframes, only CPI font selection is possible.

A parameter in the SCS data stream (Final Form Text (Level 2) Document Content Architecture (FFT (L2) DCA)) Page Presentation media (PPM) command is used to control Duplex printing.

These 6 fonts are included in SCS emulation as 300 dpi bitmap fonts: OCR-B (3), Boldface Italic (155), Boldface (159), Essay (160), Essay Bold (163) and Document (175).

Compatibility

For the Card for IPDS and SCS/TNe, IPDS is supported under the IPDS MENU settings and SCS is supported under the SCS/TNe MENU settings.

Support Notes:

• Microcode updates and User's Guides are available from the IBM web site.
• See the appropriate User's Guide for configuration instructions.
• When the printer is emulating an IBM printer, the function supported depends on the IBM host software.

For Direct Network Attachment - Hardware Compatibility

When the printer contains an optional Card for IPDS and SCS/TNe, it attaches to a network using one of the following MarkNet print servers:

The optional MarkNet print servers support Token-Ring (4Mbps or 16 Mbps), Ethernet 10BaseT/10Base2 and Ethernet 100BaseTX/10BaseT with the following Network Operating Systems: Novell NetWare (including NetWare Directory Services - NDS and NDPS), Microsoft Windows NT 4.0 Server, Microsoft Windows 2000 Server and Advanced Server, TokenTalk and EtherTalk, and the following UNIX platforms: Caldera OpenLinux, IBM AIX, Compaq Tru64 (Digital), HP-UX, Red Hat Linux, SCO OpenServer, UnixWare, SGI IRIX, Sun Solaris, Sun Solaris x86, SuSE Linux and TurboLinux.

Notes:

• MarkNet N2000 microcode level 3.15.x or later is required for SCS/TNe support.
• For OptraImage network ports, microcode level 5.15.x or later is required for SCS/TNe support.
• Any MarkNet X2000 microcode level provides AFP/IPDS support only.
• For IPDS printing, a minimum of 16MB of printer memory is required.

Software Compatibility for AFP/IPDS Printing Over TCP/IP

The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are:

• OS/400 V5R1 or later through PSF/400 (See Note).

Note: With OS/400 V5R1, to print IPDS over TCP/IP through PSF/400.

Software Compatibility for SCS LU1 Printing Over TCP/IP

The IBM iSeries software requirements for TN5250e SCS (LU1) printing using up to 4 sessions when the printer is emulating an IBM 3812-01 printer are:

• OS/400 V5R1 or later with all PTFs applied

Note: Up to four (4) TN5250e sessions from multiple hosts are supported; however the SCS Menu options settings for all 4 sessions are the same.

The IBM mainframe software requirements for TN3270e SCS (LU1) printing using one session when the printer is emulating an IBM 3287 printer are:

• IBM Communications Server (CS) for OS/390 or z/OS Version 2 Release 5 or later on ESA systems (Note: All appropriate APARs must be applied)
• TCP/IP for VM/ESA Version 2 Release 4 or later (function level 310 or later)
• TCP/IP for VSE/ESA V1 R3 or later using General Print Server Feature
• Using Cisco 7500 Series Routers

SCS LU1 Printing Using a Gateway and TCP/IP

If TN3270E capable SNA gateway software supports the TN3270E protocol according to RFC 2355, then a TN3270e session can be used to print SCS jobs directly from a mainframe or iSeries. Examples of these gateways are:

• IBM SecureWay Communications Server 6.0.2 for Windows NT 4.0, Windows 2000, AIX, UnixWare 7, OS/2 Warp
• Microsoft NetResults SNA Server 4.0
• Novell NetWare for SAA 4 as either a TN3270E Server or TN5250 Server
• Attachmate E-Vantage SNA Gateway 2.0
• Barr Systems Communications Server
• Cisco TN3270 Server
• OpenConnect using the WebConnect SNA Access Server or SNA Print Server

Printer Stand Recommendations

• To minimize the possibility of tipping when the printer is configured with three or more paper drawers, the use of a printer stand is recommended.
• Under no circumstances should the bottom of the base printer or the bottom of the duplex unit, if installed, be higher than 38.1 mm (1.5 in.) above the printer stand side shelves.

The following table shows the recommended limit for input and output options to use with each respective printer stand.

Maximum Recommended Configurations

 Low Profile Printer Stand
 Stand with Cabinet Printer Stand
--------------- --------------- --------------- -------------
Input Options: Any 4 250/500 Any 4 250/500 Any 4 250/500
 sheet drawers sheet drawers sheet drawers
 OR OR OR
 2000-sheet drwr 2000-sheet drwr 2000-sheet drwr
 plus 1 250/500 plus 1 250/500 plus 3 250/500
 sheet drawers sheet drawers sheet drawers
 
Output Options: Full Support Full Support Full Support
 

Printer Stand Dimensions

 Width Depth Height Weight(1)
 ------------ ------------ ------------ ------------
Low Profile Stand 772mm(30.4") 594mm(23.2") 584mm(23.0") 24.6Kg(54lb)
 
Printer Stand 772mm(30.4") 594mm(23.2") 808mm(31.8") 34.1Kg(75lb)
with Cabinet
 
Printer Stand 772mm(30.4") 594mm(23.2") 808mm(31.8") 30.9Kg(68lb)
 

MarkNet** Compatibility

The Ethernet and Token-Ring print servers and standard Ethernet connections support the following protocols:

The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:

The printer with standard Ethernet MarkNet N2000 Series internal print servers and the MarkNet X2000 Series external print servers support a Resident Web page with Microsoft Internet Explorer 4.0 or later and Netscape Navigator 4.5 or later for Windows 95/98, Windows Me, Windows 2000 or Windows NT.

The remote operator panel is available from MarkNet N2000 internal print servers or MarkNet X2000 external print servers.

IBM Host Connection Features

iSeries (formerly AS/400)

IBM iSeries with OS/400 V5R1 or later utilizing OS/400 Host Print Transform. Use Manufacturer Type and Model (MFRTYPMDL) of LEXOPTRAT** (in OS/400 Version 4 Release 2 or later), LEXOPTRAS**, or LEXOPTRA**.

Certifications

Infoprint 1352 complies with the global safety standard for Information Technology Equipment, i.e. IEC 60950, and its country equivalents in the markets we serve. The following sections highlight the approvals and certifications that Infoprint 1352 is expected to receive.

110V Version

• Underwriters Laboratories, Inc. UL 60650, Third Edition, Information Technology Equipment
• U.S. FDA, CDRH registration per 21 CFR Chapter I, Subchapter J, Section 1040
• Energy Star compliant
• Canadian Standards Association CAN/CSA-C22.2 No. 950-95, Third Edition, Information Technology Equipment
• FCC Class B per FCC Rules, Parts 2 and 15 - all geographies
• Industry Canada (EMC) Compliance Statement
• IEC 320, International Standard Electrical Appliance Connectors
• BSMI (Taiwan) Class B

230V Version

• IEC 60825-1, International Standard Safety of Laser Products
• CB Certificate and Test report to include the country differences of all participating CB Scheme members as listed at:

  www.cbscheme.com

  With the exception of Canada (CA), Japan (JP), and U.S.A. (US). CB assessment shall be to IEC 60950 2nd ED. + A1+A2+A3+A4

• TUV "GS"
• SEMKO "S" mark
• CE mark Class B
• Argentina "S" Mark from UL

Software

MarkVision Professional and printer drivers are provided on the Drivers, MarkVision, and Utilities CD that is packaged with the printer. See Publications section for details. MarkVision Professional for Sun Solaris, SuSE Linux, Red Hat Linux, HP-UX and IBM AIX operating systems are available from the IBM Web site.

The Windows software applications, which operate in the operating systems listed above, are best suited to run with the drivers supplied with the printer. These drivers for Windows take advantage of your printer functions and increase the printer performance wherever possible.

Operating Systems

Infoprint 1352 is compatible with applications running under the following operating systems for either local or network connections: For information about USB connections, see Local Connections.

Apple Macintosh

• Apple MacOS 8.6 or later

Microsoft Windows

Note: Download the latest printer drivers from the IBM Web site.

Novell

Note: Download the NDPS IP Gateway from the IBM Web site.

Linux

Note: Download the Enhanced Printer Drivers from the IBM Web site.

UNIX

Note: Download the Enhanced Printer Drivers from the IBM Web site.

Other

• Virtually any platform supporting TCP/IP
• IBM iSeries Systems with TCP/IP with OS/400(r) V5R1 or later using OS/400 Host Print Transform.

The software applications that operate with most Apple LaserWriter printers will generally operate with the Infoprint 1352. The Macintosh 128, 512, and 512e Computers are not supported.

Management Solutions (MarkVision**)

MarkVision Professional, MarkVision Messenger, NetPnP and Software Installation and Distribution tools are provided on Drivers, MarkVision and Utilities CDs.

MarkVision Professional

MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devises in an enterprise environment via a Web browser. It provides IT administrators with realtime device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.

MarkVision Messenger

MarkVision Messenger provides real-time notification of printer conditions via e-mail, paging, or other applications and facilitates automated responses to these conditions before they become critical and disruptive to user productivity. MarkVision Messenger enhances administrators' quality for service and improves end-user productivity and satisfaction.

NetPnP (provided on CD)

NetPnP senses when a new IBM printer is attached to the network and automatically creates a shared printer object on the Windows NT 4.0 or Windows 2000 system. Furthermore, NetPnP notifies end-users via e-mail that the new network printer is available for printing. Designed for Windows NT 4.0 and Windows 2000 environments, Net PnP makes the Infoprint 1352 printers available to end-users within seconds of network attachment.

Software Installation and Distribution tools (provided on CD)

In Windows NT 4.0 and Windows 2000 environments, these tools enable administrators to push printer software installation to other Windows NT 4.0 or Windows 2000 workstations or to write a script that will install specified printer software on specified Windows NT 4.0 or Windows 2000 workstations on the network. In Windows 9X environments, it enables administrators to write installation scripts that can then be distributed to other workstations. When executed, these scripts will silently install all specified IBM software.

Solaris Ready for Sun customers

These printers are certified Solaris Ready by Sun and include Infoprint 1352 Enhanced Printer Drivers for Sun Systems and Sun specific documentation seamless installation and use in Sun Solaris environments. The IBM network printers are Ethernet-ready for use in Sun networks.

The IBM printers with USB interfaces are certified for USB attachment to Sun Blade workstations and Sun Ray appliances. MarkVision Professional is available from the IBM Web site.

IBM Infoprint Manager

Infoprint Manager support: Yes (post GA). Requires administrators to create printer objects.

Network Printer Resource Utility (NPRU)

NPRU will not support the Infoprint 1352.

TCP/IP Network Port Monitor Utility

This utility will not support the Infoprint 1352.

LPR Remote Printing Client Utility

This utility will not support the Infoprint 1352.

Note: (1) Weights for low-voltage and high-voltage models are the same. Recommended Clearances Infoprint 1352

Left Right Front Rear
-------- -------- -------- --------
Base 304.8 mm 304.8 mm 508.0 mm 304.8 mm
Model (12 in) (12 in) (20 in) (12 in)
Operating Environment

Electrical Specifications

Low-Voltage Models

High-Voltage Models

Power Consumption

 Infoprint 1352
 Base/Network
 Models
Printing States Power
------------------------------ --------------
Continuous Printing 650 watts
Standby (Power Saver Off) 95 watts
Standby (Power Saver On) 16 watts
 
Maximum current while printing
Low-Voltage Printer 10.5 amps
High-Voltage Printer 5.0 amps
 
Note: Using a 220 V ac to 110 V ac power converter with the low-voltage
model is not recommended.
 

Note: All models are Energy Star compliant.

Acoustics

All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

Meter Average Sound Pressure, dBa.

ServicePacs
 
Machine Electronic
Type Model Description Part Number
------- ------- ------------------------------- -----------
 4528 001,n01 SVCPAC PTR 2YR DEPOT EZS 9X5/ND 96P2332
 4528 001,n01 SVCPAC PTR 3YR DEPOT EZS 9X5/ND 96P2333
 
 4528 001,n01 SVCPAC PTR 1YR IOR 9X5/NXTDAY 96P2336
 4528 001,n01 SVCPAC PTR 2YR IOR 9X5/NXTDAY 96P2337
 4528 001,n01 SVCPAC PTR 3YR IOR 9X5/NXTDAY 96P2338
 4528 001,n01 SVCPAC PTR 4YR IOR 9X5/NXTDAY 96P2339
 4528 001,n01 SVCPAC PTR 5YR IOR 9X5/NXTDAY 96P2340
 
 4528 001,n01 SVCPAC PTR 1YR IOR 24X7/SAMDAY 96P2341
 4528 001,n01 SVCPAC PTR 2YR IOR 24X7/SAMDAY 96P2342
 4528 001,n01 SVCPAC PTR 3YR IOR 24X7/SAMDAY 96P2343
 4528 001,n01 SVCPAC PTR 4YR IOR 24X7/SAMDAY 96P2344
 4528 001,n01 SVCPAC PTR 5YR IOR 24X7/SAMDAY 96P2345
 4402 500-Sheet Duplex Unit
 4501 250-Sheet Tray
 4502 500-Sheet Tray
 4505 250-Sheet Drawer
 4506 500-Sheet Drawer
 4520 2000-Sheet Drawer (Letter)
 4521 2000-Sheet Drawer (A4)
 4511 Envelope Feeder
 4620 Output Expander
 4640 5-Bin Mailbox
 4630 High Capacity Output Stacker
 4621 StapleSmart Finisher
 4503 250-Sheet Universal Tray
 4504 400-Sheet Universal Tray
 4507 250-Sheet Universal Adjustable Drawer
 4508 400-Sheet Universal Adjustable Drawer
 4308 8 MB Memory DIMM
 4316 16 MB Memory DIMM
 4332 32 MB Memory DIMM
 4364 64 MB Memory DIMM
 4390 128 MB Memory DIMM
 4036 16 MB Flash Card
 4038 32 MB Flash Card
 4329 20+GB Hard disk with Adapter
 4876 Optra Forms**16 MB Flash Card
 4881 Optra Forms**32 MB Flash Card
 4877 Optra Forms**20+GB Hard Disk
 4871 Optra Forms**Software
 4872 Optra Forms**Director Software
 4880 Optra Forms**Manager
 4878 Optra Forms**2-Key Security
 4879 Optra Forms**3-Key Security
 4820 Card for IPDS & SCS/TNe
 4821 ImageQuick Card
 4870 Bar Code Card
 4170 802.11b Wireless Adapter
 4141 Twinax/Coax Adapter for SCS
 4120 Token-Ring
 4121 Token-Ring-3 Port
 4162 Ethernet 10/100BaseTX
 4163 Ethernet 10/100BaseTX-1 Port
 4164 Ethernet 10/100BaseTX-3 Port
 4165 Ethernet 10/100TX/10Base2-1 Pt
 4132 External Serial Adapter
 4138 RS-232C Serial Interface card
 4139 Parallel 1284-B Interface card
 4180 10 ft. Parallel Cable
 4181 20 ft. Parallel Cable
 4183 50 ft. Serial Cable
 4184 2-meter USB Cable
 4533 T Printer Stand with Cabinet
 4534 T Printer Stand
 4535 T Low-Profile Printer Stand
 4536 Printer Base
 4546 Scanner Stand with Cabinet
 4547 T2 Scanner Shelf
 4548 Operator Panel Cover

Printer Features

All printer features are customer installable. FC = feature code.

The Infoprint 1352 media features include:

This input option can be installed beneath the printer to offer an added input source which holds approximately 250 sheets of 20 lb. Paper. Multiple optional drawers are supported simultaneously.

This optional input source installs beneath the printer, and it holds approximately 500 sheets of (20 lb.) paper. Multiple optional drawers are supported simultaneously.

This optional input source is designed to be installed beneath the printer and below any other optional input sources. This option holds approximately 2000 sheets of letter (20 lb.) paper.

This optional input source is designed to be installed beneath the printer and below any other optional input sources. This option holds approximately 2000 sheets of A4 (20 lb.) paper.

For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. (Drawer includes tray plus support unit.) For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 250 sheets of (20 lb.) paper.

For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. (Drawer includes tray plus support unit.) For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 500 sheets of (20 lb.) paper.

This option offers two-sided printing capability for the Infoprint 1352 printer.

Although occasional envelope printing is supported through the printer's multi-purpose tray, this option is available for more frequent envelope printing. It holds up to 85 envelopes.

This output option installs above the printer's primary output bin. It offers an additional output destination, which holds up to 650 sheets of 20 lb paper. Multiple output expanders are supported, as indicated in Media Support.

This option is a solution for very large print jobs that need to be sent as a whole to one large bin (as opposed to splitting the large job up to separate smaller bins). The High-Capacity Output Stacker holds approximately 1850 sheets (20 lb paper). This option is designed to install directly above the printer's primary output bin. The printers support an output expander in addition to the High Capacity Output Stacker, for a total capacity of up to 3000 pages of output. When both an output expander and High Capacity Output Stacker are installed, the output expander must be installed above the High Capacity Output Stacker.

This is available on the Infoprint 1352 only.

This option offers five output destinations in one. Each of the 5 bins on this option supports approximately 100 pages (20 lb) of paper. The workgroup printers support two of these options for a total of ten additional bins or an additional capacity of 1000 sheets of output.

This output option offers stapling, offsetting, and an additional output bin. Utilizing the same "floating" tray system as the High Capacity Output Stacker, the Finisher can support up to 750 sheets of unstapled media. For stapled media, the output bin supports up to 40 stapled sets or 600 sheets. The stapler can staple a maximum of 25 sheets per set. For additional output, one output expander OR one 5-bin mailbox can be placed on top of the Finisher. The Finisher must be the first option attached to the printer. The staple cartridge contains 3000 staples. Refill staple cartridges are available in packages of three cartridges. The StapleSmart Finisher has two handy storage compartments for storing extra staple cartridges.

This tray supports a range of narrow media not supported by the standard paper tray. The UAT enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 250-sheet UAT is 3x5 inches. The UAT is sold as a drawer or as a tray. The tray can be used in place of the 250-sheet integrated tray in the appropriate base printer.

This tray supports a range of narrow media not supported by the standard paper tray. The UAT enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 400-UAT is 3x5 inches. The UAT is sold as a drawer or as a tray. The tray can be used in place of the 500-sheet integrated tray in the appropriate base printer.

This drawer supports a range of narrow media not supported by the standard paper tray. It enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 250-sheet UAT is 3x5 inches. It is sold as a drawer or as a tray. The tray can be used in place of the 250-sheet integrated tray in the appropriate base printer.

This drawer supports a range of narrow media not supported by the standard paper tray. It enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section. The minimum size supported in the 400-UAT is 3x7 inches. It is sold as a drawer or as a tray. The tray can be used in place of the 500-sheet integrated tray in the appropriate base printer.

The Infoprint 1352 has two slots for memory DIMMs and two slots for flash memory cards and application solution cards. Only one flash memory card is allowed.

The memory features include the following SDRAM features:

The flash memory features include:

If larger storage is required, an optional hard disk feature is also available. The hard disk with adapter feature is required for a hard disk support. The adapter plugs into the internal network adapter slots. Multiple hard disk features may be ordered although only one hard disk can be installed at a time.

In addition to the standard USB port for all models and standard parallel port on the non-network models, each Infoprint 1352 model has two slots for an optional hard disk, optional internal print servers, or optional local connections.

The following local connection options are supported:

This adapter is installed on the printer's parallel port and receives its power through the parallel port. It utilizes a standard 25-pin D-shell females connector and supports baud rates up to 19,200 bps for RS-232C or 38,400 bps for RS-422.

This card provides a IEEE 1284-B parallel port.

This card provides an RS-232C serial port.

For parallel attachment, this cable is recommended for ten feet or less and may be ordered by the customer.

For parallel attachment, this cable is recommended for twenty feet or less and may be ordered by the customer.

For serial attachment, this cable is recommended for fifty feet or less and may be ordered by the customer.

For USB attachment, this USB cable is recommended and may be ordered by the customer.

Network cards plug into the internal interface adapter slots (two slots for Infoprint 1352). Only one card is allowed per network protocol. That is, only one Ethernet and only one Token-Ring card. One Ethernet and one Token-Ring card are allowed. Any of the non base models have Ethernet onboard and cannot have a 10/100BaseTX card installed. These models can have the 10Base/2 card installed but it will disable the onboard Ethernet.

Infoprint 1352 network models come standard with Fast Ethernet 10/100BaseTx built-in to the controller board. Additionally, both printers support the following MarkNet** N2000 Series Internal Print Servers:

These features are external standalone boxes that connect to the printer's parallel or serial ports. Network models require the Parallel 1284-B Interface Card (FC 4139). The following features provide MarkNet X2000 Series external network connection:

This external print server has one parallel port to connect to an Ethernet 10BaseT/100BaseTX network.

This external print server has one parallel port to connect to an Ethernet 10BaseT/100BaseTX or 10Base2 network.

This external print server has two parallel ports and one serial port to connect up to three printers to an Ethernet 10BaseT/100BaseTX network.

This external print server has two parallel ports and one serial port to connect up to three printers to a Token-Ring network.

This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11b wireless standard. This standard operates at speeds of up to 11 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building construction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device.

The feature is an external adapter that connects to the ethernet port on the printer. The ethernet port can be the standard port that comes on any network model, or an internal ethernet or external print server port. This feature includes a cable that plus into the Ethernet port.

This adapter attaches to the printer's USB port and has one 10/100BaseTX RJ-45 port for connection to the network.

Note: This features is customer installable.

The MarkNet N2000 Series also supports and works in Infoprint 1352 printers.

The MarkNet N2000 Series and MarkNet X2000 Series support Network Plug and Print 2.0 on Windows NT 4.0 and Windows 2000 systems

The Ethernet and Token-Ring print servers and standard Ethernet connections support the following protocols:

The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:

The printer with standard Ethernet MarkNet N2000 Series internal print servers and the MarkNet X2000 Series external print servers support a Resident Web page with Microsoft Internet Explorer 4.0 or later and Netscape Navigator 4.5 or later for Windows 95/98, Windows Me, Windows 2000 or Windows NT.

The remote operator panel is available from MarkNet N2000 internal print servers or MarkNet X2000 external print servers.

Optra Forms uses 'up-to-the-minute' data directly from customer applications and combines it with printer resident electronic forms with text and graphics to produce (print) completed forms such as invoices, statements, pick slips, labels, purchase orders or confirmations with bar codes or other specialized graphics on a variety of paper types. For Optra Forms:

For Optra Forms:

Optra Forms is supported by the Infoprint 1352 printer using the Optra Forms 2, 4, 8 and 16MB Flash DIMM's or Optra Forms Hard Disk.

Optra Forms Director is a Windows NT or Windows 2000 server-based program. Using additional host software (AS/400, UNIX or Mainframe), the host application sends a print spool file to a Windows NT or 2000 print queue. Optra Forms Director service automatically pareses the print spool file into single or multiple print jobs using Microsoft Visual Basic Script or JScript methods and Named Pipes.