Printronix S809 Dot-matrix Printer

 
 
 
 


SM809-AM S809 900cps 24-pin Dot Matrix Multiform Impact Printer
New
SM809 S809 w/ Ethernet, USB 2.0, Serial and Parallel (New)
$2345.00


SM809-AM S809 900cps 24-pin Dot Matrix Multiform Impact Printer
Fully refurbished with 1-year warranty
SM809 S809 w/ Ethernet, USB 2.0, Serial and Parallel



Looking for S809 Parts?Abstract

The Printronix Model S809 is a professional industrial impact matrix printer capable of printing at speeds of up to 800 cps in Data Processing (DP) mode(1). Other print-quality choices are DP Text, Near Letter Quality (NLQ) Gothic, NLQ Courier, OCR-A, and OCR-B.

Note: (1) Exact print speed varies depending on document complexity, system configuration, software application, the printer driver, and the printer state.

Model Abstract S809

The Printronix Model S809 is a professional industrial heavy-duty printer with a workload capacity of up to 44,000 pages per month. The 18-wire print head delivers reliable printing on up to 8-part carbonless forms in DP, DP Text, NLQ, and OCR print modes.

Highlights

The Printronix Model S809 industrial impact matrix printer is built on the strengths of previous models of the Printronix 4247 family and features:

  • Print speed of up to 800 characters per second (cps) in DP mode
  • Remote printer management capabilities when LAN attached
  • Parallel, Ethernet, serial, and USB 2.0 optional integrated attachments
  • Auto forms loading, auto thickness adjustment, and auto eject to enhance operator productivity
  • Workload capacity of up to 44,000 pages per month
  • Multiple data stream emulations to provide easy replacement of older printers
  • Forms width from 3 to 17 in (76 to 432 mm)
  • Maximum print width of 13.6 in (348 mm)
  • One or two continuous forms front tractors for maximum forms-feeding reliability
  • Easy-to-use operator panel
  • Quiet operation
  • DP, DP Text, NLQ, OCR-A, and OCR-B fonts
  • Extensive bar code support


260056-001 Second Tractor - S809/S828 – Field Kit


260058-001 Open Pedestal Printer Stand - S809 - Field Kit



S809-SP1 S809 Next Business Day, 1 Year Service Pack
S809-SP2 S809 Next Business Day, 2 Year Service Pack
S809-SP3 S809 Next Business Day, 3 Year Service Pack


260202-001 Printer Installation
260202-001 Printer Installation
New
260202-001 (New)
$366.00





260059-002 25M Char Extended Life Ribbon, S809/S828, 6Pk
260059-002 25M Char Extended Life Ribbon, S809/S828
New
260059-002 6-pack (New)
$299.00


Description

The Model S809 is an office and industrial printer that provides multiple forms paper handling capabilities on up to 8-part carbonless forms.

This printer is designed to meet mid-volume output requirements and to provide reliable supply chain printing at an attractive total cost of ownership. A low-cost alternative to laser technology, the Printronix S809 can deliver broad forms flexibility, support for wide format printing, and the convenience of remote printer management when LAN-attached.

The Model S809 can have either one or two straight continuous-forms paper paths for outstanding paper-feeding reliability. One paper path is standard; the second path is an optional feature.

The printer features quiet operation, and an easy-to-use operator panel. Typical applications include transaction processing for invoices, office or internal business documents, as well as bar codes, labels, and multipart forms.

Optional attachments include:

  • Parallel
  • Ethernet 10/100 local area network (LAN)
  • USB 2.0
  • Serial RS-232 9-pin

Print speed

Print speeds (in characters per second) of the S809 are up to:

  • 800 cps in DP mode at 10 characters per inch (cpi)
  • 400 cps in DP Text mode
  • 200 cps in NLQ mode

The print speed in lines per minute at 10 cpi and 6 lines per inch (lpi) is up to:

  • 403 lines per minute at 60 characters per line (6-in line length)
  • 248 lines per minute at 136 characters per line (13.6-in line length)

Heavy-duty, reliable printing

The S809 is a professional industrial heavy-duty printer with a workload capacity of up to 44,000 pages per month. The 18-wire print head delivers reliable printing on up to 8-part carbonless forms in DP, DP Text, NLQ, and OCR print modes.

Flexible forms handling

The Printronix S809 Printer allows exceptional forms-handling flexibility. The base printer includes one continuous-forms tractor path; a second continuous-forms front tractor paper path is optional.

This dual front paper path capability can translate into a single printer performing work that formerly required two or more printers. Users can load different forms into each tractor path and then enable the path that corresponds to the desired print job.

Print quality comparison

Print modes include DP, DP text, NLQ, OCR-A, and OCR-B Print qualities on the S809 are equivalent in character size, shape, and resolution to the print qualities available on the previous printers.

The following table summarizes the print quality for DP, DP Text, and NLQ at 10 cpi:

Print Quality    Horizontal  Vertical  Horizontal  Vertical
dpi dpi Cell Size Cell Size
(Dots) (Dots)
-------------- ---------- -------- -------- --------

DP 60 72 12 9

DP Text 100 72 20 9

NLQ 100 144 20 18

Operator panel

The S809 includes a redesigned, improved operator panel. It enables access to many of the printer's functions including paper path selection, paper loading and parking, and the printer configuration.

The operator panel includes:

  • A 2-line by 24-character LCD display
  • Fourteen push buttons
  • Three status indicators
  • An audible alarm
  • Messages that can be displayed in English, German, French, Spanish, Italian, Danish, Dutch, Finnish, Swedish, Norwegian, Brazilian-Portuguese, and Polish

When the printer is LAN-attached, the operator panel display can be viewed from any Web browser and remotely controlled by the Remote Printer Management Utility (RPMU) Virtual Operator Panel.

Printer data stream emulations

In addition to native S809 mode, the following emulations are supported for easy replacement of many older printers.

Emulation modes to easily replace many older printers include:

  • ASCII emulation for the IBM Proprinter III XL, IBM 2381 Personal Printer, and Epson FX printers

Parallel, serial, USB, and Ethernet attachments

Printers emulated include the:

  • Proprinter III XL
  • IBM 2381 Personal Printer
  • Epson FX80 - 1170

Data streams supported are IBM PPDS and Epson FX.

Existing S809 Model 003 RPQs

No existing S809 RPQ currently available for the S809 Model is presently available for the Model S809. Submit RPQ requests if an RPQ is needed.

Optional features

Bulk order for optional features

Since the S809 features are all customer-installable, in some cases it is desirable to bulk order certain features so that machines can be easily reconfigured by Business Partners and end users. Thus, there is no maximum order quantity for S809 MES features.

The maximum number of initial-order attachment features that can be ordered is one.

                                     Initial     MES
Order Order
------- -----
SBCS Ctlr Par, Ser, USB 4350 4351
SBCS Ctlr Par, Eth 10/100, ASCII 4352 4353
No Controller 9300
Printer Stand, Black 4465 4466
Add'l Front Tractor, Black 4006 4007
Shipping:
Ocean Shipping 5250
Air Freight Shipping 5251

Ordering information

The following must be included on all initial orders for a S809 printer:

  1. One controller feature (#4350, 4352, 4356) or (#9300). Feature number 9300 indicates that no controller is required.
  2. One printer language kit (#9450, 9451, 9452, 9453, 9454, 9455, 9456, 9457, 9458, 9459, 9460, 9461, 9462, 9464, 9465, 9466, 9467, or 9468) A language kit must be included. There are no defaults.
  3. One line cord (#9970, 9971, 9972, 9973, 9974, 9975, 9976, 9250, 9251, 9253, 9254, 9978, 9979, or 9997). A line cord feature must be ordered. There are no defaults.
  4. Optionally, a printer stand (#4465 or #4466 for MES) and/or an additional front tractor (#4006) may be ordered.
  5. A shipping feature (#5250 or #5251) is required.

Models

Customer Setup (CSU)

Both the S809 and the features are customer setup.

Technical Description

Physical Specifications

  • Dimensions in base configuration:
    • Width: 670 mm (26.4 in)
    • Depth: 450 mm (17.7 in)
    • Height: 320 mm (12.6 in)
    • Weight: 21 kg (46.3 lbs)
  • Pedestal printer stand (#4462)
    • Top surface width: 699 mm (27.5 in)
    • Top surface depth: 260 mm (10.25 in)
    • Top surface depth with output tray attached: 787 mm (31 in)
    • Top surface height: 718 mm (28.3 in)
    • Weight: 19.5 kg (43 lbs)

Operating Environment

Input voltage required

Input voltages required for S809 Universal Power Supply:

  • 100 - 127 V ac single phase grounded 50/60 Hz
  • 200 - 240 V ac single phase grounded 50/60 Hz

Printer heat output

Max heat output:

  • 115 Volts AC: 147 watts (500 BTU/Hr)
  • 230 Volts AC: 138 watts (470 BTU/Hr)

Operating environment requirements

S809 in continuous forms:

  • Temperature: 10 to 40 degrees C (50 to 104 degrees F)
  • Relative humidity: 10% to 90%(Non-condensing)

Noise emission

Noise Emission (measured in DP Quality mode):

S809 base printer:                    Operating     Idle
--------- --------
Sound power level (LWAd): 6.8 bels 3.7 bels
Sound pressure level (LpAm): 57.9 dB 26.7

EMC compliance

The Printronix S809 meets the following standards:

  • Class A of FCC rules part 15
  • Class A of CE EN55022 (1998)+A1:2000, EN55024:1998 + A1:2001 + A2:2003, EN61000-3-2:2000 + A2:2005, EN61000-3-3:1995 + A1:2001
  • Class A of Canadian ICES-003
  • Class A of Australian/New Zealand AS/NZS 3548
  • Class A of Russian GOST
  • Class A of Japan VCCI

Safety compliance

The Printronix S809 meets the following standards:

  • UL 1950, third edition
  • TUV, EN60950/All (1999)
  • CSA, C22.2 No.950-95
  • Russian GOST
  • Mexico NOM
  • Argentina UL S-mark

Limitations

The S809 has the following limitations:

  • The front continuous forms paper path will handle up to 8-part carbonless forms. Forms greater than 4-part should be tested for readability before using.
  • The following ASCII restrictions apply when using S809 native escape commands to print bar code:
    • Current bar code applications that use bar code escape commands must be modified to use S809 native bar code commands.
    • Bar code printing is limited to picket orientation and 3 to 1 wide to narrow ratio when printed using native S809 escape commands.

The S809 has the following additional limitations when emulating earlier ASCII printers:

  • The following commands and functions are not supported when replacing existing IBM 4224 (Model 301, 302, and 3E3), 4230 (Model 4xx or 5xx), or 4232 Model 302:
    • Begin/End overstrike
    • Begin/End understrike
    • Select presentation media
    • Set presentation position
    • Initialize/Delete local font
    • Select local character set
    • Set vertical units
    • Graphic segment list
    • Bar code
    • Segment
    • Overlays
    • Graphic mapping control
    • Read printer status

Paper handling

Continuous forms

The S809 will handle up to 8-part carbonless continuous forms in the front tractor paths.

For the front tractor paths

  • Form weight can range from 56 grams per square meter (gsm) (15 lbs) to 150 gsm (40 lbs). Paper weights outside this range must be tested by the customer for proper operation.
  • Overall (total) form thickness for all parts may range from 0.08 mm (0.S809 in) to 0.64 mm (0.025 in)

The following forms widths and lengths are supported:

  • Form width from 76.2 mm (3 in) to 431.8 mm (17 in)
  • Form lengths from 76.2 mm (3 in) to 609.6 mm (24 in)

Forms less than 152.4 mm (6 in) in length or width should be tested for satisfactory stacking and may require operator assistance.

Hardware Requirements

Not applicable.

Software Requirements

Network Interface Summary

Installation and integration:

        Network speed / connection                       10/100 BASET
Auto-detection 10/100 network speed Yes
Manual network speed selection No
Parallel interface free Yes
Network configuration through printer op panel Yes
Web page network setting configuration Yes
Web page login password protection Yes
Windows Port Monitor and Drivers Yes, download
from IBM Solutions Company
NIC configuration printout Yes
DHCP Yes
WINS Yes
DDNS Yes
 

System/OS

        IBM iSeries OS 400                               Yes
IBM pSeries AIX Yes
Sun Solaris Yes
Unix Yes
Linux Yes
Windows 95,98,2000,NT,XP, 2003 Server Yes
NETBIOS over TCP Yes
NETBEUI No
Novell Netware No
OS2 No
MacIntosh / Apple EtherTalk No
 

Printing methods

        Raw Port 9100                                    Yes
LPD/LPR Port 515 Yes

Interleaved multi-protocol communications Yes
Hot Interface switching between Parallel
and LAN interfaces Yes
Hot Port switching Yes between Raw
9100, LPR/LPD 515
Multiple internal print server queues No
String substitutions No
String before/after job No
 

Datastreams

        S809 ASCII native                                Yes
ASCII text and single byte escapes Yes
IBM Personal Printer 2391 emulation Yes
IBM Proprinter III XL emulation Yes
IBM Personal Printer 2381 emulation Yes
Epson FX emulation Yes

Print server facilities support

        PSF AIX Release V5R2 and higher                  Yes
PSF OS400 Release V5R2 and higher Yes
PSF for Z/OS Release 4.1 and higher(1) Yes
 

Note: (1) In PSF for Z/OS, the S809 is only supported in S809 native and 4224 emulation modes. The 4230 was supported in 4224 emulation mode only and not in native mode.

Network management

        S809 Remote Printer Management Utility           Yes (download
from IBM Solutions Company)
IBM NPM Yes ( generic
printer)
HP JetAdmin Yes ( generic
printer)
E-mail SMTP Yes
Internal Web page Yes
 

Printer status and error reporting

        Ready                                            Yes
Not ready Yes
Paper out Yes
Paper jam Yes
Cover open Yes
Machine check (carriage fault, ribbon blocked?) Yes
 

Network link

        Ethernet II                                      Yes
802.2 Yes
802.3 Yes
2/SNAP Yes
Link disconnect (no data timeout) 15 second fixed
setting
 

Protocols

        IP                                               Yes
TCP Yes
UDP Yes
ARP Yes
RARP Yes
SMB Yes
DHCP Yes
DDNS Yes
WINS Yes
BOOTP Yes
FTP Yes
TFTP Yes
ICMP Yes
LPR/LPD Yes
DHCP Yes
SNMP Yes
SMTP Yes
HTTP Yes
MIB II (RFC1213) Yes(1)
Host resource MIB (RFC 1514) Yes
Printer MIB (RFC1759) Yes
S809 Private MIB Yes
 

Note: (1) All relevant parts of MIB-II (RFC123I) required to support HP Jetadmin are implemented.

NIC hardware

        RISC processor                                   Yes
Flash memory 4MB
RAM 16MB
Attachment connector type RJ-45
Network traffic led Yes (green)
Network speed led Yes(yellow)
 

Firmware upgrade

        Firmware upgrade over network                    Yes
Firmware upgrade over parallel interf Yes


The following IP table group OIDs are not implemented: ipForwarding, ipDefaultTTL, ipInReceives, ipInHdrErrors, ipInAddrErrors, ipForwDatagrams, ipInUnknownProtos, ipInDiscards, ipInDelivers, ipOutRequests, ipOutDiscards, ipOutNoRoutes, ipReasmTimeout, ipReasmReqds, ipReasmOKs, ipReasmFails, ipFragOKs, ipFragFails, ipFragCreates.

The ipRouteTable OIDs are not implemented.

The ipNetToMediaTable OIDs are not implemented.

The icmp group OIDs are not implemented.

The tcp group OIDs are not implemented.

The udp group OIDs are not implemented.

The snmp group OIDs are not implemented.

Publications

Printronix Model S809: User's Guide

Language         Form Number
------------ ------------
English S550-0965-00
Arabic SB20-2258-00
B-Portuguese S517-9022-00
Dutch SA15-6091-00
French SF11-1013-00
German SA12-5165-00
Japanese SA88-4046-00
Polish SA85-0193-00
Russian S571-0085-00
Spanish S510-3172-00
S Chinese S151-0918-00
Turkish SB10-7072-00
 

Printronix Model S809: Quick Setup Guide

Language         Form Number
------------ ------------
English S550-1016-00
Arabic SB20-2259-00
B-Portuguese S517-9021-00
Czech S550-1382-00
Danish S511-5869-00
Dutch SA15-6090-00
Finnish SC23-8018-00
French SF11-1014-00
German SA12-5166-00
Japanese SA88-4093-00
Norwegian SA15-4887-00
Polish SA85-0194-00
Russian S571-0086-00
S Chinese S151-0919-00
Spanish S510-3173-00
Swedish SA14-3074-00
Turkish SB10-7073-00

The following Model S809 publications are shipped with each printer.

  • Model S809: Quick Setup Guide (hardcopy)
  • Model S809: Safety Information (hardcopy)
  • Model S809: Statement of Limited Warranty (hardcopy when required by country law)
  • A CD-ROM that contains softcopy of the following publications:
    • Printronix Model S809: User's Guide(2)
    • Printronix Model S809: Quick Setup Guide(3)
    • Printronix Model S809: Programmer's Reference
    • Printronix Model S809: Safety Information
    • Printronix Model S809: Warranty Information

Note: 2) This publication is on the CD in the following languages: English, French, Brazilian-Portuguese, German, Spanish, Dutch, Arabic, Chinese-Simplified, Japanese, Polish, Russian, and Turkish.

Note:(3) This publication is on the CD in the following languages: English, French, Brazilian-Portuguese, German, Spanish, Danish, Dutch, Finnish, Norwegian, Swedish, Arabic, Chinese-Simplified, Czech, Japanese, Polish, Russian, and Turkish.

This CD can also be ordered using Form number GK4T-3960.

All of the above publications are also available in the IBM Solutions Company Library and can be accessed from the following Web site:

https://www.infoprintsolutionscompany.com
  1. Select "product publications'
  2. And then select S809.

The User's Guide contains the following sections:

  • Getting Started
  • Understanding the Operator Panel
  • Printer Configuration Menus
  • Setting Up Different Forms Paths
  • Problem Solving
  • Printer and Form Specifications

No Charge Specify Codes

Two lengths of low voltage power cords are available. Specify feature code 9250 for 6.0ft (1.8m) Chicago power cord with non-locking plug or feature code 9251 for 2.8m (9 ft) power cord with non-locking plug. The 9 ft. power cord with non-locking plug is the default.

Country Low Voltage Power Cords

 Power Cord
Feature
Code List of Countries
---------- ------------------------------------------------------
9251 Aruba Bahamas Barbados
Bermuda Bolivia Brazil
Canada Cayman Islands Columbia
Costa Rica Curacao Dominican Republic
El Salvador Ecuador Guatemala
Guyana Haiti Honduras
Jamaica Japan Korea
Liberia Mexico Netherlands Ant.
Nicaragua Panama Peru
Philippines Saudi Arabia Surinam
Trinidad Tobago
United States Venezuela
 

Country High Voltage Power Cords

 Power Cord
Feature
Code List of Countries
---------- ---------------------------------------------------
9979 Australia
Columbia New Zealand Papua N. Guinea
Paraguay Uruguay Western Samoa

9970 Afghanistan Algeria Angola
Austria Belgium Benin
Bosnia Bulgaria Burundi
Cameroon C. Afr. Rep. Chad
Congo Brazzaville Croatia Czech Republic
Finland France French Guyana
Germany Greece Guinea
Hungary Iceland Indonesia
Iran Ivory Coast Jordan
Kenya Korea Lebanon
Luxembourg Macau Macedonia
Malagasy Martinique Mauritania
Mauritius Monaco Montenegro
Morocco Mozambique Netherlands
New Caledonia Niger Norway
Poland Portugal Romania
Saudi Arabia Senegal Serbia
Slovak Republic Slovenia Spain
Sudan Sweden Syria
Togo Tunisia Turkey
Upper Volta Russia Vietnam
Zimbabwe

9975 Denmark

9972 Bangladesh Burma Myanmar
Pakistan South Africa Sri Lanka

9971 Antigua Bahrain Brunei
Channel Islands Cyprus Fiji
Ghana Hong Kong India
Iraq Ireland Kuwait
Malawi Malaysia Malta
Nepal Nigeria North Yemen
Oman Polynesia Qatar
Sierra Leone Singapore South Yemen
Tanzania Uganda United Kingdom
United Arab Emir. Zambia

9974 Liechtenstein Switzerland
9254 China (PR)
9997 Argentina
 

Country High Voltage Power Cords

 Power Cord
Feature
Code List of Countries
---------- ----------------------------------------------------
9973 Chile Ethiopia Italy
Libya Somalia

9976 Israel

9978 Aruba Bahamas Barbados
Bermuda Bolivia Brazil
Canada Cayman Islands Costa Rica
Curacao Dominican Rep. El Salvador
Ecuador Guatemala Guyana
Haiti Honduras Jamaica
Japan Liberia Netherlands Ant.
Nicaragua Panama Peru
Philippines Surinam Taiwan
Thailand Trinidad Tobago
United States Venezuela
 

Feature Descriptions

None.

Special Feature Codes -- Chargeable

Description                          Machine   Model
------------------------------------ ------- -----
Printronix Model S809 S809

Initial MES
Order Order
Feature Feature
Number Number
------- -------
Add'l Front Tractor, Black 4006 4007
SBCS Ctlr Par, Ser, USB 4350 4351
SBCS Ctlr Par, Eth 10/100 ASCII 4352 4353
No Controller 9300
Printer Stand, Black 4465 4466

Printer Language Kits:
Language Kit - English 9450 4550
Language Kit - German 9451 4551
Language Kit - French 9452 4552
Language Kit - Spanish 9453 4553
Language Kit - Italian 9454 4554
Language Kit - Danish 9455 4555
Language Kit - Dutch 9456 4556
Language Kit - Finnish 9457 4557
Language Kit - Norwegian 9458 4558
Language Kit - Swedish 9459 4559
Language Kit - Brazilian Portuguese 9460 4560
Language Kit - Russian 9461 4561
Language Kit - Polish 9462 4562
Language Kit - Czech 9464 4564
Language Kit - Turkish 9465 4565
Language Kit - Simp Chinese 9466 4566
Language Kit - Japanese 9467 4567
Language Kit - Arabic 9468 4568
Line Cord - Europe 9970 4770
Line Cord - UK 9971 4771
Line Cord - Italy 9973 4773
Line Cord - South Africa 9972 4772
Line Cord - Switzerland 9974 4774
Line Cord - Denmark 9975 4775
Line Cord - Israel 9976 4776
Line Cord - US - 9 foot 9251 4751
Line Cord - US - 6 foot 9250 4750
Line Cord - Australia 9979 4779
Line Cord - S. America 9978 4778
Line Cord - China 9254 4754
Line Cord - Argentina 9997 4797
Line Cord - Japan non-lock 9253 4780
Line Cord - India 9981 4781
Shipping:
Ocean Shipping 5250
Air Freight Shipping 5251
 

Warranty and Maintenance ServicePacs for Printronix Model S809

                               Part       Machine Type
Description Number and Model
---------------------------- ------- ------------
1 Year 24x7 SD 51J8953 S809
2 Year 24x7 SD 51J8954 S809
3 Year 24x7 SD 51J8955 S809
4 Year 24x7 SD 51J8956 S809
5 Year 24x7 SD 51J8957 S809
1 Year 24x7 SD (Maintenance) 51J8958 S809(1)
2 Year 24x7 SD (Maintenance) 51J8959 S809(1)
 

Note: (1) Post Warranty Servicepac.

The following list of features are available to add features to installed Printronix Model S809 printers:

                                       Field Install (MES)
Order Feature Numbers
---------------------
Add'l Front Tractor, Black 4007
SBCS Ctlr Par, Ser, USB 4351
SBCS Ctlr Par, Eth 10/100 ASCII 4353
Printer Stand, Black 4466

Printer Language Kits:
Language Kit - English 4550
Language Kit - German 4551
Language Kit - French 4552
Language Kit - Spanish 4553
Language Kit - Italian 4554
Language Kit - Danish 4555
Language Kit - Dutch 4556
Language Kit - Finnish 4557
Language Kit - Norwegian 4558
Language Kit - Swedish 4559
Language Kit - Brazilian Portuguese 4560
Language Kit - Russian 4561
Language Kit - Polish 4562
Language Kit - Czech 4564
Language Kit - Turkish 4565
Language Kit - Simp Chinese 4566
Language Kit - Japanese 4567
Language Kit - Arabic 4568
Line Cord - Europe 4770
Line Cord - UK 4771
Line Cord - Italy 4773
Line Cord - South Africa 4772
Line Cord - Switzerland 4774
Line Cord - Denmark 4775
Line Cord - Israel 4776
Line Cord - US - 9 foot 4751
Line Cord - US - 6 foot 4750
Line Cord - Australia 4779
Line Cord - S. America 4778
Line Cord - China 4754
Line Cord - Argentina 4797
Line Cord - Japan non-lock 4780

Feature Descriptions

(#4006) Additional front tractor, black- Initial

(#4007) Additional front tractor, black - MES

This feature provides a second 6-pin front continuous forms tractor path. This tractor feature is in addition to the standard continuous forms tractor paper path standard with the Model S809. Up to 8-part carbonless or 6-part carbon forms may be used in the front tractor paths.

  • Maximum per S809 printer: One
  • Minimum: None
  • Maximum order quantity: No maximum quantity for the MES feature
  • Co-requisites: None
  • Prerequisites: Base S809 printer
  • Field installation: Yes; Feature number 4007
  • Customer setup: Yes

(#4465) Printer Stand, Black - Initial

(#4466) Printer Stand, Black - MES

Provides a sturdy printer stand designed for the model L03 and S809 printers.

  • Maximum per S809 printer: One
  • Maximum order quantity: No maximum quantity for the MES feature
  • Minimum: None
  • Co-requisites: None
  • Prerequisites: None
  • Field installation: Yes; Feature number 4466
  • Customer setup: Yes

Printer controller Cards

(#4350) SBCS Controller with parallel, serial, and USB - Initial

(#4351) SBCS Controller with parallel, serial, and USB - MES

This feature provides a Single-Byte Character Set Controller with serial, parallel, and USB ports for host attachment.

  • Maximum per S809 printer: One
  • Minimum per S809 printer: Zero
  • Maximum order quantity: No maximum quantity for the MES feature
  • Co-requisites: None
  • Prerequisites: S809
  • Limitations: Not with any other controller card feature; each printer can have only one of the following (feature number 4350, 4352, 4356, or 9300) on an initial order
  • Field installation: Yes; Feature number 4351
  • Customer setup: Yes

(#4352) SBCS Controller with parallel and Ethernet 10/100 ASCII - Initial

(#4353) SBCS Controller with parallel and Ethernet 10/100 ASCII - MES

This feature provides a single-byte character set (SBCS) controller with parallel and Ethernet 10/100 ports for host attachment.

  • Maximum per S809 printer: One
  • Minimum per S809 printer: None
  • Maximum order quantity: No maximum quantity for the MES feature
  • Co-requisites: None
  • Prerequisites: S809
  • Limitations: Not with any other controller card feature; each printer can have only one of the following features on an initial order: (feature number 4350, 4352, 4356, or 9300)
  • Field installation: Yes; Feature number 4353
  • Customer setup: Yes

(#9300) No Controller - Initial

This feature specifies that no Controller is to be ordered with the base printer. This feature would normally only be ordered by Business Partners who have an inventory of control unit features that can be added to a base printer.

  • Maximum per S809 printer: One for initial order
  • Minimum per S809 printer: Zero
  • Maximum order quantity: One
  • Co-requisites: None
  • Prerequisites: S809
  • Limitations: Not with any other control unit feature; each printer can have only one of the following features on an initial order (one of feature number 4350, 4352, 4356, or 9300)
  • Field installation: No, this feature is only applicable to initial orders
  • Customer setup: Not applicable

(#5250) Ocean shipping - Initial

This feature can only be used when a quantity of printers sufficient to fill a 20-foot ocean container is being ordered. Since this container holds 88 printers, this feature can only be used when an order is being placed for 88 or a multiple of 88 (for example 88, 176, and so on) printers.

There is no additional charge for ocean shipping.

  • Maximum per S809 printer: One per printer
  • Minimum per S809 printer: Multiples of 88 printers must be ordered
  • Maximum order quantity: One
  • Co-requisites: None
  • Prerequisites: S809
  • Limitations: Either feature number 5250 or feature number 5251 must be ordered with each S809 printer; refer to previous ordering quantity limitation information
  • Field installation: No, this feature is only applicable to initial orders
  • Customer setup: Not applicable

(#5251) Air freight shipping - Initial

This feature specifies that the S809 printer being ordered is to be shipped by air freight. This is a chargeable feature.

  • Maximum per S809 printer: One
  • Minimum per S809 printer: None
  • Maximum order quantity: One
  • Co-requisites: None
  • Prerequisites: S809
  • Limitations: Either feature number 5250 or feature number 5251 must be ordered with each S809 printer
  • Field installation: No, this feature is only applicable to initial orders
  • Customer setup: Not applicable

Feature Exchanges

Trademarks

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.
** Company, product, or service name may be a trademark or service mark of others.
Printronix is a trademark of Printronix Company in the United States, other countries, or both.Windows is a trademark of Microsoft Corporation.UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.