 |
Home: www.argecy.com |
 |
sales@argecy.com |
 |
Instant Message |
|
|
|||||||||
6555-773
IBM P200 Color Monitor Model 773Attachment Flexibility
The microprocessor-controlled, multi-frequency operation of the monitors allows you to change, replace, or upgrade your system unit or use increasingly sophisticated applications, without replacing the monitor. All standard VGA, SVGA, and XGA applications will run without modification, saving additional expense both in program alterations and in retraining of staff.
Digital controls let you control:
A reset control allows you to revert to the factory default setting, if any, for the current mode. You can customize the current mode settings of the monitor; any changes are saved automatically.
On-screen displays help you adjust the controls by showing you real-time adjustments. Some show horizontal and vertical frequencies (line rate and refresh rate, respectively) for the current display mode.
Ergonomic Features
The monitors have the following ergonomic features:
Viewable Mod Type CRT Size Image size Ap.Grille Volt. Hemisphere Covers --- ---- -------- ---------- --------- ----- ---------- -------- 773 P200 20 inch 19.1 inch 0.31 mm Univ. Northern P. White
Monitor Characteristics
Feature P200 ------- ---- CRT Type: Trinitron Phosphor type: P22 CRT size/Viewable image size: 20-inch/19.1-inch (486mm) Aperture grille (mm): 0.31 Max viewable area (mm): 388 x 293 Anti-reflective: Yes Anti-static: Yes Multi-frequency operation: Yes ID bits: Note 1 VESA DDC Capable: 1/2B Horizontal frequency (kHz): 30-96 Vertical frequency (Hz): 48-160 Clock rate (Mpels/sec): 240 Max flicker-free mode: 1600 x 1200 Max addressability: 1600 x 1280 User controls: Digital On Screen Display: Yes H/V frequency display: Note 2 Factory-presets/User settings: 15/10 Apple** attach capable: Yes ISO 9241/3 Capable: Yes VESA DPMS Power mgmt capable: Yes FCC compliance class: B MPR-II Emission compliance: Yes TCO-91 Emission compliance: Yes TCO-92 Environmental Label: Yes Blue Angel Environmental Label: No Video connector: 13W3 Touch option: No Lift-tilt-swivel option: NoNotes:
Digital user controls are set on a recessed panel located below the front bezel.
Control P200 -------------------------- ---- Geometry Reset Y Brightness Y Contrast Y Horizontal size Y Vertical size Y Horizontal position Y Vertical position Y Pincushion Y Image rotation Y R,G,B color intensities Y Color preset selection Y Horizontal convergence Y Vertical convergence Y Moire cancellation Y Degauss (via power switch) Y -------------------------- ----The power on/off pushbutton is located at the right-hand end of the user control panel. The monitors are automatically (demagnetised) degaussed each time they are switched on. In addition, users can perform a degauss operation during use, to improve image color purity, again by switching the monitor off and on.
Indicators
The P200 Color Monitor provides an On-Screen Display to assist in the operation of user controls by indicating both the real-time adjustments being made, and the horizontal and vertical frequencies in use for the current display mode. The frequencies are shown in the On-Screen Displays that appear whenever the brightness or contrast are adjusted.
A green/amber LED indicates the operational state of the monitors:
Power Indicator Operating State --------------- --------------- Steady Green Normal operation Flashing Green/Amber VESA DPMS Standby state Flashing Green/Amber VESA DPMS Suspend state Steady Amber VESA DPMS Off state Flashing Green Display mode out of range Flashing Green/Amber/Off Self diagnostics mode Flashing Amber Internal fault detected
P200 ------------------ Width: 472 mm (18.6 inch) Depth: 501 mm (19.7 inch) Height: 494 mm (19.4 inch) Weight: 30 kg (66 lb)Note: The height and weight includes the tilt-swivel stand.