IBM Infoprint 2000 2710-DP1

 
 
 
 
 


The IBM Infoprint 2000 is a high-end 110 page-per-minute (PPM) cut-sheet Production Publishing System.

Model Abstract 2710-DP1

The IBM 2710 Model DP1 is a high speed cut sheet production publisher aimed at the data center environment where Xerox native data stream (LCDS/Metacode) is the predominant production datastream.


Highlights

The Infoprint 2000 is a high speed 110 PPM Multifunction Publishing System. Depending on model and configuration, it can be used as the following:

  • As a standalone duplicator.
  • As a network printer for large workgroups, production printer for ERP systems or systems printer in non-IBM environments.
  • As both a standalone duplicator and network printer.
  • As high speed channel attached data center printer with support for Xerox (LCDS/Metacode) datastreams.

Benefits of the Infoprint 2000 include:

  • Large paper input capacity of 4,000 sheets standard.
  • Finisher and stapling capability standard.
  • 600 DPI print quality.
  • High monthly print volumes, 2 million impressions per month maximum, 1.1 million impressions per month on average.
  • Optional Booklet Maker.
  • Optional Network (Ethernet) and channel connectivity.

Description

Depending on model and configuration, it can be used as the following:

  • A Standalone Full Function Duplicator.
  • A High Speed Network Printer.
  • Both a High Speed Network Printer and Full Function Duplicator.
  • A High Speed Channel Attached Data Center Printer.

As a standalone digital duplicator, the Infoprint 2000 offers the following benefits:

  • A 110 PPM low-cost per copy digital duplicator.
  • A finisher and optional booklet maker for complex duplication jobs.
  • Pre-press level production scanning application.

As a network printer, the Infoprint 2000 offers the following benefits:

  • A high speed 110 PPM network printer.
  • 600 dots-per-inch (DPI) printer quality.
  • PCL 5/6 and PostScript level 3 support is standard.
  • 10/100BaseT Ethernet connectivity is standard.
  • A dual head stitcher is standard.
  • Optional High Capacity Stacker, High Capacity Paper Feeder and Booklet Maker for complex print jobs.

As a channel attached Data Center Printer, the InfoPrint 2000 offers the following benefits:

  • A high speed 110 PPM printer with an optional booklet maker.
  • 600 DPI printer quality.
  • IBM S/390 Parallel Channel connectivity is available.
  • 10/100BaseT Ethernet connectivity is available.
  • A dual head stitcher is standard.
  • Optional high capacity stacker, high capacity paper feeder and booklet maker for complex print jobs.

Some models of the Infoprint 2000 can be configured as both a standalone duplicator and network printer with the benefits of both.

In addition to the three base models, IBM offers Printer Solution Offerings (PSO) that contain all the features for certain customer applications and may be ordered as a bundled set at a lower cost than if ordered separately. The PSO is IBM's most price-competitive offering for popular customer applications. One PSO must be ordered with a RP1 or DP1 model at initial order.

Base Models

The Infoprint 2000 production publishing system is a high quality high speed cut sheet printing system. All models of the Infoprint 2000 with the network printer capability can be front-ended by Infoprint Manager or can be integrated into an existing Infoprint Manager (Version 3.1 at the appropriate service level) environment.

Model RP1 -- High speed multifunctional digital duplicator with upgradable features to include network connectivity and is aimed at the corporate reprographics centers, in-plant print shops and the print for pay market.

Model NP1 -- High speed PostScript, PCL, and PDF printer with upgradable features to include production copying capabilities and is aimed at the large office workgroup, and data center environments where PostScript and PCL are the predominant data streams (that is, ERP installations like PeopleSoft and SAP as well as non-IBM data center environments).

Model DP1 -- High speed cut sheet production publisher aimed at the data center environment where Xerox native data stream (LCDS/Metacode) is the predominant production datastream.

The RP1 base model comes standard with the following:

  • A 110 PPM print engine with 600 DPI print quality
  • 512 MB of memory standard for storing digital images (no memory upgrade is available)
  • Paper input module with 3 drawers and 4,000 sheet capacity
  • A finisher with stapler with a capacity of 3,000 sheets
  • SCS controller
  • Scan station (requires a Windows NT workstation that must be ordered separately)
  • A modem for remote diagnostics
  • An operator attention light

The NP1 base model comes standard with the following:

  • A 110 PPM print engine with 600 DPI print quality
  • 512 MB of memory standard for storing digital images (no memory upgrade is available)
  • Paper input module with 3 drawers and 4,000 sheet capacity
  • A finisher with stapler with a capacity of 3,000 sheets
  • SCS controller
  • Network connectivity for 10/100BaseT Ethernet
  • A modem for remote diagnostics (only on 60 Hz machines).
  • An operator attention light

The DP1 base model comes standard with the following:

  • A 110 PPM print engine with 600 DPI print quality
  • Paper input module with 3 drawers and 4,000 sheet capacity
  • A finisher with stapler with a capacity of 3,000 sheets
  • A modem for remote diagnostics (only on 60 Hz machines)
  • An operator attention light

Printer Solution Offerings (PSO)

In addition to the three base models, there are PSOs available for some models. A PSO includes several features bundled together for a specific application. The PSO is IBM's most price-competitive offering for a specific application.

Model RP1 has two PSOs associated with it. One of these PSOs (but not both) must be ordered with the initial order.

  • Standalone Duplicator Solution (feature #4210).
  • Network Publisher Solution (feature #4220).

The Standalone Digital Duplicator Solution is intended for reprographics centers and print shop applications. This feature includes all microcode needed for the Standalone Digital Duplicator application.

The Network Publisher Solution is intended for corporate reprographics centers where an attachment to the corporate network is required. This feature includes all microcode for duplicator printer functions, and also includes the LAN connect capability.

Model NP1 is itself a complete solution and therefore doesn't have any PSOs associated with it.

Model DP1 has one PSO associated with it. This PSO must be ordered with the initial order.

  • Xerox Datastream Solution (feature #4230).

The Xerox Datastream Solution is intended for corporate data center applications. This feature includes an SCS, 512 MB memory, network connectivity, channel connectivity hardware, Xerox Native Datastream (LCDS/Metacode) enablement and all microcode needed for a network printer and data center application.

Features

Below is a list of optional features for the Infoprint 2000:

  • Additional paper supply module with 4,000 sheet paper capacity
  • High capacity stacker with 3,000 sheet capacity
  • Signature booklet maker that saddle folds and saddle stitches
  • Network connectivity to a 10/100BaseT Ethernet LAN
  • Channel connectivity to a S/390 parallel channel
  • Software support of the Xerox Datastream (LCDS/Metacode) enablement

In addition to these options, the NP1 can have an optional scan station (standard with the RP1). The scan station includes an up to 20 PPM scanner with 600 DPI resolution and a SCSI card. The scan station requires a Windows NT workstation that must be ordered separately.

Refer to the IBM Web site at https://www.printers.ibm.com/ for the Windows NT PC that is a prerequisite for the scan station.

Note: The Infoprint 2000 scan station has been tested and qualified on the listed PC configurations only. IBM service cannot install or service Infoprint 2000 software running on configurations which are not qualified.


Model

Model Summary Matrix

Model Description
----- ---------------------------------------------
DP1 High speed cut sheet production publisher


Technical Description

The base engine of each of the models includes the following:

  • A 110 PPM print engine with 600 DPI print quality
  • 512 MB of memory standard for storing digital images (included with PSO for DP1).
  • Paper input module with 3 drawers and 4,000 sheet capacity
  • A finisher with stapler with a capacity of 3,000 sheets
  • A modem for remote diagnostics (only on 60 Hz machines)
  • An operator attention light

Below is a list of optional features that can ordered for any of the three models.

  • Additional Paper Supply Module with 4,000 sheet paper capacity
  • High Capacity Stacker with 5,000 sheet capacity
  • Signature Booklet Maker that saddle folds and saddle stitches
  • Network connectivity to a 10/100BaseT Ethernet LAN (standard on all but the Standalone Duplicator PSO)
  • Channel connectivity to a S/390 parallel channel
  • Support of the Xerox data stream

In addition to these options, the NP1 and RP1 model can have one scanning station (it comes standard on the RP1 model).

Physical Specifications

Component Height Depth Length Weight
----------------------- ----------- ----------- ----------- --------
Paper Supply Module 45.0 inches 33.5 inches 31.0 inches 545 lbs.
114.3 cm 83.8 cm 78.7 cm 247.4 kg

Printing Engine 64.0 inches 47.0 inches 67.0 inches 1500 lbs.
162.6 cm 119.4 cm 170.2 cm 567.3 kg

Finisher 61.5 inches 34.0 inches 22.0 inches 650 lbs.
156.2 cm 86.4 cm 53.3 cm 294.7 kg

Stacker 49.5 inches 31.6 inches 33.0 inches 450 lbs.
125.7 cm 78.7 cm 84.8 cm 203.7 kg

Signature Booklet Maker 58.0 inches 24.0 inches 62.0 inches 970 lbs.
147.2 cm 58.4 cm 90.0 cm 439.8 kg

Scan Station 10.8 inches 24.0 inches 30.0 inches 74.5 lbs.
27.3 cm 61.0 cm 76.2 cm 33.6 kg

SCS Cart Assembly 25.0 inches 28.0 inches 12.0 inches 55 lbs.
63.5 cm 71.1 cm 27.9 cm 24.9 kg

The space requirements for the Infoprint 2000 depends on the options installed.

  • Space requirements for the base printer are 20.5 ft. (6.2 m) by 10 ft. (3.05 m).
  • Space requirements for the maximum configuration (scan station, high capacity stacker, signature booklet maker) are 30 ft. (9.1 m) by 10 ft. (3.05 m).

These requirements include the minimum clearance requirements for service which are:

  • 48 in. (122 cm) from the back of the printer.
  • 42 in. (106.7 cm) from the front of the printer.
  • 36 in. (91.4 cm) from finisher/high capacity stacker/signature booklet maker side of the printer.
  • 30 in. (76.2 cm) from the controller/scan station side of the printer.

Operating Environment

 Printer/ Printer/
Printer/ Extra Paper Booklet
Printer (1) Stacker Feed Module Maker Scanner
-------------- ----------- ----------- ----------- -------- -------
Power:
Base Printer
o 120/208 - 127/220 Volt, 60 Hz., 3 Phase (Note that 240
Volt is not available.)
o 380 - 415 Volt, 50 Hz., 3 Phase
Note: The base model requires 3-phase, 5 wire
electrical service with ground AND neutral.

Signature Bookletmaker and High Capacity Stacker
o 120 +/- 10% V @ 60 Hz, Single Phase
o 230 +/- 10% V @ 50 Hz, Single Phase

Watts:
Warmup 4500 5000 4700 5700 350

Standby 1500 1700 1700 1600 350

Operating 5000 5500 5200 6200 350

Heat Levels:
BTU/hr
Warmup 14130 5869 14758 17898 1099

Standby 4710 1843 5338 5024 1099

Operating 15700 6769 16328 19468 1099

Sound Power:
dBA
Standby 73
Operating 85
Operating 3
(Impulse)

Environment:
Operating
Temperature 10 to 30 deg.C

Humidity 20 to 80 %RH

Printer/ Printer/ Printer/ Extra Paper Booklet Printer (1) Stacker Feed Module Maker Scanner -------------- ----------- ----------- ----------- -------- ------- Shipping Temperature -30 to 140 deg.C Humidity 5 to 90% RH Shipping Materials Temperature -30 to 90 deg.C Humidity 5 to 90% RH (1) Consists of paper input module, printing engine, memory, finisher, SCS, operator control interface, network connectivity

Limitations

Not applicable.

Hardware Requirements

Not applicable.

Software Requirements

Not applicable.


Features -- Specify/Special/Exchange

No Charge Specify Codes

Keyboards

An English keyboard is the default keyboard for both the Controller keyboard and the Scan Station Keyboard. No specify code is required for an English keyboard.

VOLTAGE: A specify code is not required. Voltage/power will be determined by the plant based on the country code of the order.

Special Feature Codes -- Chargeable

Description Machine Model Feature Feature
(Factory) (Field)
----------------------------- ------- ----- --------- -------
Infoprint 2000 2710 DP1

Printer Solution Offerings (PSO)
(This must be ordered with the DP1)
Xerox Datastream Solution 4230
(Includes Networked Printer Microcode, SCS controller, 512 MB Memory, Network connectivity, channel connectivity, Xerox Datastream
Enablement)

Features
Paper Supply Module 4510
High Capacity Stacker 4620
Signature Booklet Maker 4720
Thermal Vent Kit 4910
Stacker Dolly (extra) 4622
Chicago Power Cord 9250

Paper Supply Module 4511
High Capacity Stacker 4621
Signature Booklet Maker 4721
Thermal Vent Kit 4911
Stacker Dolly (extra) 4623

Additional Feature Descriptions

Xerox Datastream Solution - 2nd to 6th printer (Channel Attach, TCP/IP, RJE) (#4232)

Prerequisites: Infoprint 2000 Model DP1. Maximum Number of Features: One per Infoprint 2000 Model DP1. Corequisites: The 4th Infoprint 4000 attached to the same host requires FN 4110 in addition to this feature. Compatibility Conflicts: Cannot be installed with FN 4230, 4240, or 4233. Field Installable: No. Initial Order: Yes. Cable Orders: None.

Xerox Datastream Solution - 1st printer only - (TCP/IP and RJE) (#4233)

Prerequisites: Infoprint 2000 Model DP1 that is the first printer attached by TCP/IP and RJE. Maximum Number of Features: One per Infoprint 2000 Model DP1. Corequisites: None. Compatibility Conflicts: Cannot be installed with FN 4230, 4240, or 4232. Field Installable: No. Initial Order: Yes. Cable Orders: None.

4240 Base Datacenter Publisher PSO (#4240)

Prerequisites: Infoprint 2000 Model DP1. Maximum Number of Features: One per Infoprint 2000 Model DP1. Corequisites: None. Compatibility Conflicts: Cannot be installed with FN 4230, 4232, or 4233. Field Installable: No. Initial Order: Yes. Cable Orders: None.

Paper Supply Module (#4510/4511)

A maximum of one additional paper supply module can be added per printer. It is identical to the standard one.

High Capacity Stacker (#4620/4621)

A 5,000 sheet stacker is available as an optional output device. A maximum 1 of one can be added per printer. It allows copied or printed sets to be offset or straight stacked. The rotator unit in the stacker rotates paper 90 degrees for the correct orientation to the booklet maker. The stacker is required for the booklet maker. Other capabilities of the stacker are:

  • Holds 8.5 x 11 inch to 11 x 17 inch paper. 2
  • The stacker delivers unstapled documents face down in a first-page- first order.
  • A stacker dolly comes with the stacker to move large jobs easily and without the risk of papers falling.
  • The stacker has two access buttons.
    • Top button: partially lowers tray and allows to remove finished sets.
    • Bottom button: completely lowers tray and allows the dolly to transport large quantity of finished sets.
  • Additional stacker dollys may be purchased.

Signature Booklet Maker (#4720/4721)

The booklet maker is an optional output device that creates a booklet by saddlefolding and stapling supported paper sizes. The booklet maker requires the High Capacity Stacker (Feature 4620/4621) as a prequisite in order to rotate paper from long-edge feed to short-edge feed. A maximum of one booklet maker can be added per printer.

A conveyor belt delivers the finished documents from the booklet maker. The interval width between booklets can be adjusted via the OCI and/or printer drivers. The conveyor belt can accept up to 42 booklets (10 sheets, 80 gsm) and when not in use can be dropped at a 90-degree angle to free up space.

The booklet maker includes a trimmer. It allows trimming of the open edge of folded booklets and is usually required when the number of folded sheets is 10 or more. The trim length is adjustable up to 10 mm.

The booklet maker supports the following:

  • Saddle fold only (no Z-fold).
  • Folds A3, A4, letter and ledger (11 x 17 inch).
  • 2 - 22 sheet fold of 20 # paper
  • Saddle stitch
  • Fully integrated into the printer.

Scan Station (#4290/4291)

One scan station comes standard with the RP1 model. It consists of an up to 20 PPM scanner with 600 DPI resolution and a SCSI card. The scan station requires a PC running Windows NT which is NOT included in the scan station feature and must be ordered separately. The Windows NT PC is connected to the controller via Ethernet. A maximum of one scan station is supported per printer.

When this feature is installed on the model NP1, then, FN 4289 (printer to printer/duplicator ucode upgrade) is a prerequisite.

The scanner supports:

  • Scan rate of 20 ppm at 600 DPI in simplex mode, slightly less in duplex mode.
  • Automatic Document Feeder (ADF).
  • Accepts up to 50 sheets (up to 8.5 x 14 inch 20 lb. Stock).
  • Accepts up to 20 sheets (11 x 17 inch 20 lb. Stock).

Refer to the IBM website at w3domino.penn.boulder.ibm.com/sales for the Windows NT PC which is a prerequisite for this feature. Note: The Infoprint 2000 scan station has been tested and qualified on the listed PC configurations only. IBM service cannot install or service Infoprint 2000 software running on configurations which are not qualified.

Network Connectivity (#4160/4161)

The network connectivity option uses a 10/100BaseT Ethernet Network Interface Card (NIC) with a RJ-45 jack. A maximum of one of these features is allowed per printer. Network protocol support includes TCP/IP, Appletalk, Ethernet, IPX/SPX.

Channel Connectivity (#4110/4111)

The channel connectivity option includes a channel controller standalone unit. It has connectors for channel Tag and Bus cables (cables must be ordered separately) for a connection to an IBM S/390 parallel channel. A maximum of one of these features is allowed per printer.

Xerox Datastream Enablement (#4840/4841)

The Xerox datastream enablement includes software to convert the Xerox native data stream (LCDS/Metacode) to PostScript level 3. Included with this option is the software and installation. A maximum of one of these features is allowed per printer.

Duplicator to Printer/Duplicator Microcode Upgrade (#4287)

This feature is only available as a MES on the RP1 model. It provides the microcode for an RP1 model with the Standalone Duplicator PSO (feature 4210) to add printer capability. Network Connectivity (feature 4160 or 4161) must be ordered as a corequisite. A maximum of one of these features is allowed per printer.

Prerequisites:

When FN 4287 is ordered for the Model RP1, FN 4210 (standalone duplicator PSO) is a prerequisite, and either FN 4160 or FN 4161 (LAN connect) is also a prerequisite.

Printer to Printer/Duplicator Microcode Upgrade (#4289)

This feature is only available as a MES on the NP1 model. It provides the microcode for a NP1 model to be upgraded from a printer only to a Printer/Duplicator. The Scan Station (feature 4290 or 4291) must be ordered as a corequisite. A maximum of one of these features is allowed per printer.

Thermal Vent Kit (#4910/4911)

This kit includes all hardware to vent heat from the Infoprint 2000 to the outside. A maximum of one of these features is allowed per printer.

Stacker Dolly (#4622/4623)

This includes an additional dolly used with the stacker to move large print jobs easily without the risk of papers falling. There is no maximum number of stacker dollys allowed per printer.

Fonts

The standard Adobe PostScript 3 font support includes the following:

  • Albertus Medium
  • Albertus Extra Bold
  • Antique Olive
  • Antique Olive Italic
  • Antique Olive Bold
  • Clarendon Condensed
  • Coronet
  • Courier
  • Courier Italic
  • Courier Bold
  • Courier Bold Italic
  • Garamond Antiqua
  • Garamond Halbfett
  • Garamond Kursiv
  • Garamond Halbfett Kursiv
  • Letter Gothic
  • Letter Gothic Italic
  • Letter Gothic Bold
  • Marigold
  • CG Omega
  • CG Omega Italic
  • CG Omega Bold
  • CG Omega Bold Italic
  • CG Times
  • CG Times Italic
  • CG Times Bold
  • CG Times Bold Italic
  • Univers Medium
  • Univers Medium Italic
  • Univers Bold
  • Univers Bold Italic
  • Univers Medium Condensed
  • Univers Medium Condensed Italic
  • Univers Bold Condensed
  • Univers Bold Condensed Italic
  • Arial
  • Arial Italic
  • Arial Bold
  • Arial Bold Italic
  • Times New Roman
  • Times New Roman Italic
  • Times New Roman Bold
  • Times New Roman Bold Italic
  • Times-Roman
  • Times-Bold
  • Times-Italic
  • Times-BoldItalic
  • ITC Avant Garde-Book
  • ITC Avant Garde-Demi
  • ITC Avant Garde-BookOblique
  • ITC Avant Garde-DemiOblique
  • Helvetica-Condensed
  • Helvetica-Condensed-Bold
  • Helvetica-Condensed-Oblique
  • Helvetica-Condensed-BoldOblique
  • Helvetica-Narrow
  • Helvetica-Narrow-Bold
  • Helvetica-Narrow-Oblique
  • Helvetica-Narrow-BoldOblique
  • Helvetica
  • Helvetica-Bold
  • Helvetica-Oblique
  • Helvetica-BoldOblique
  • Palatino-Roman
  • Palatino-Bold
  • Palatino-Italic
  • Palatino-BoldItalic
  • Courier
  • Courier-Bold
  • Courier-Oblique
  • Courier-BoldOblique
  • New Century Schoolbook-Roman
  • New Century Schoolbook-Bold
  • New Century Schoolbook-Italic
  • New Century Schoolbook-BoldItalic
  • ITC Bookman-Light
  • ITC Bookman-Demi
  • ITC Bookman-LightItalic
  • ITC Bookman-DemiItalic

Supplies

Lexmark International Inc. markets IBM Infoprint 2000 supplies. Supplies can be purchased from Lexmark Authorized Supplies Dealers or in the U.S. from Lexmark Telemarketing Operations. Lexmark Telemarketing Operations can also provide information about the nearest Lexmark Authorized Supplies Dealer.

In the US call Lexmark Telemarketing at 800-438-2468. Mail orders within the U.S. should be sent to:

 Lexmark International, Inc.
2800 Wells Branch Parkway
Austin, Texas 78728

Choosing the right supplies is very important with the IBM Infoprint 2000 Printer. For optimum print quality and reliable performance, the
use of IBM supplies is recommended. Supplies are purchase-only items.The customer is responsible for ordering and maintaining an adequate
stock of supplies. It is recommended that customers maintain a two-to-three month stock of supplies on hand.

Material Safety Data Sheets (OSHA Form 20) for Infoprint 2000 supplies with the IBM logo are available in the U.S. by calling 800-IBM-4333. You will need to provide the seven-digit part number or the machine model number and supply type, for example, IBM 4370 Model 002 0r Model 003 Printer. Outside the U.S., contact your local Lexmark Supplier.

  • Infoprint 2000 Toner
    • Part Number: 69G7315
    • Unit of measure: 2.5 kg / bottle (5.5 lbs.)
    • Yield: 73,000 impressions per bottle of 8 1/2" x 11" impressions at 6% toner coverage.
    • Packaging: 2 bottles per carton
    • Minimum order quantity: 1 carton
    • Weight: 5.0 kg (11 lbs.)
    • Storage: Keep in a cool dry place

Approximate average yields have been established at a toner coverage of 6%. Application yields may vary with toner coverage, machine settings, paper type and size, and environmental conditions. Applications with extensive bar code or solid area fill can expect to achieve lower than that achieved with average text pages.

  • Infoprint 2000 Staple Wire (Spool)
    • Part Number: 69G7316
    • Yield: 40,000 staples per spool at less than 60 sheets per set and 20 lb. bond paper
  • InfoPrint 2000 Stitch Wire Cassette
    • Part Number: 69G7317
    • Yield: 45,000 sets at less than 60 sheets per set and 20 lb. bond paper

Warranty for all supplies is one year from the date of purchase as stated on the purchase receipt. Supplies warranties are only for defects in materials and workmanship at the time of shipment and are not for normal wear and tear, nor for any usage minimum.

IBM supplies are manufactured to very high quality standards. However, if you believe you are due a warranty return, you should return the supply in its original package or a package from the replacement supply to your point of purchase with an explanation of the problem, a print sample, and the approximate pages run on the supply.

Diskettes

None.

Trademarks

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

** Company, product, or service name may be a trademark or service mark of others.

Windows is a trademark of Microsoft Corporation.