Real inventory that we refurbish and stand behind, since 1985.

MOXA NPort 5200 Series Serial Device Server

›Connectivity›MOXA
 
 
 


MOXA NPort 5200 Series Serial Device Server

Introduction

The NPort® 5200 serial device servers are designed to make your industrial serial devices Internet-ready in no time. The compact size of NPort 5200 serial device servers makes them the ideal choice for connecting your RS-232 (NPort 5210/5230/5210-T/5230-T) or RS-422/485 (NPort 5230/5232/5232I/5230-T/5232-T/5232I-T) serial devices—such as PLCs, meters, and sensors—to an IP-based Ethernet LAN, making it possible for your software to access serial devices from anywhere over a local LAN or the Internet. The NPort 5200 Series has a number of useful features, including standard TCP/IP protocols and choice of operation modes, Real COM/TTY drivers for existing software, and remote control of serial devices with TCP/IP or traditional COM/TTY Port.

Standard TCP/IP Protocols and Choice of Operation Modes

NPort 5200 device servers can operate in TCP Server, TCP Client, or UDP operation mode, ensuring compatibility with software based on a standard network API (Winsock, BSD Sockets).

Real COM/TTY Drivers for Existing Software

With the Real COM/TTY drivers that are provided with each NPort, software designed for communication with COM/TTY ports can be instantly and seamlessly integrated into a TCP/IP network. This is an excellent no fuss way to preserve your software investment and enjoy the benefits of networking your serial devices.

Control Remote Serial Devices with TCP/IP or Traditional COM/TTY Port

By specifying the NPort 5200's IP address and port number, a network sockets API can obtain access to the attached serial device over the network, from any host computer that supports TCP/IP. For legacy Windows or Linux software that is COM or TTY-based, Moxa’s COM/TTY drivers provide a seamless way of operating over the network.


NPort 5210
NPort 5210-TNPort 5230NPort 5230-T
Operating Temp.0 to 55°C-40 to 75°C0 to 55°C-40 to 75°C
Baudrate110 bps to 230.4 kbps110 bps to 230.4 kbps110 bps to 230.4 kbps110 bps to 230.4 kbps
Serial StandardsRS-232RS-232RS-232/422/485RS-232/422/485
Serial Isolation––––
No. of Serial Ports2222
Input Voltage12-48 VDC12-48 VDC12-48 VDC12-48 VDC

NPort 5232NPort 5232-TNPort 5232INPort 5232I-T
Operating Temp.0 to 55°C-40 to 75°C0 to 55°C
-40 to 75°C
Baudrate110 bps to 230.4 kbps110 bps to 230.4 kbps110 bps to 230.4 kbps110 bps to 230.4 kbps
Serial StandardsRS-422/485   
RS-422/485   
RS-422/485   
RS-422/485   
Serial Isolation––2 kV2 kV
No. of Serial Ports
2
222
Input Voltage12-48 VDC12-48 VDC12-48 VDC12-48 VDC

Ethernet Interface

  • 10/100BaseT(X) Ports (RJ45 connector)

    1

Magnetic Isolation Protection

1.5 kV (built-in)

Ethernet Software Features

    Configuration Options

    Windows Utility, Telnet Console, Web Console (HTTP), Serial Console

  • Management

    DHCP Client, IPv4, SNTP, SMTP, SNMPv1, DNS, HTTP, ARP, BOOTP, UDP, TCP/IP, Telnet, ICMP

  • Windows Real COM Drivers

    Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

  • Fixed TTY Drivers

    SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

  • Linux Real TTY Drivers

    Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x

  • Android API

    Android 3.1.x and later

  • MIB

    RFC1213, RFC1317

Serial Interface

  • Connector

    NPort 5210 Series: 8-pin RJ45
    NPort 5230/5232 Series: Terminal block

  • No. of Ports

    2

  • Serial Standards

    NPort 5210 Series: RS-232
    NPort 5230 Series: RS-232/422/485 The NPort 5230 Series supports RS-232 on one port, and RS-422/485 on the other.
    NPort 5232 Series: RS-422/485

  • Operation Modes

    Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, TCP Client, TCP Server, UDP

  • Baudrate

    Supports standard baudrates (unit=bps): 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230400

  • Data Bits

    5, 6, 7, 8

  • Stop Bits

    1, 1.5, 2

  • Parity

    None, Even, Odd, Space, Mark

  • Flow Control

    RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF

  • Pull High/Low Resistor for RS-485

    NPort 5210/5232I Series: None
    NPort 5230 Series: 150 kilo-ohms
    NPort 5232 Series: 1 kilo-ohms

  • RS-485 Data Direction Control

    ADDC® (automatic data direction control)

  • Isolation

    NPort 5232I Series: 2 kV

Serial Signals

  • RS-232

    NPort 5210 Series: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
    NPort 5230 Series: TxD, RxD, RTS, CTS, GND

  • RS-422

    Tx+, Tx-, Rx+, Rx-, GND

  • RS-485-4w

    Tx+, Tx-, Rx+, Rx-, GND

  • RS-485-2w

    Data+, Data-, GND

Power Parameters

  • Input Current

    NPort 5210/5230 Series: 325 mA @ 12 VDC
    NPort 5232/5232I Series: 280 mA @ 12 VDC, 365 mA @ 12 VDC

  • Input Voltage

    12 to 48 VDC

  • No. of Power Inputs

    1

  • Power Connector

    1 removable 3-contact terminal block(s)

Reliability

  • Automatic Reboot Trigger

    Built-in WDT

  • Alert Tools

    Built-in buzzer and RTC (real-time clock)

Physical Characteristics

  • Housing

    Metal

  • Dimensions (with ears)

    NPort 5210/5230 Series, NPort 5232/5232-T: 90 x 100.4 x 22 mm (3.54 x 3.95 x 0.87 in)
    NPort 5232I/5232I-T: 90 x 100.4 x 35 mm (3.54 x 3.95 x 1.37 in)

  • Dimensions (without ears)

    NPort 5210/5230 Series, NPort 5232/5232-T: 67 x 100.4 x 22 mm (2.64 x 3.95 x 0.87 in)
    NPort 5232I/5232I-T: 67 x 100.4 x 35 mm (2.64 x 3.95 x 1.37 in)

  • Weight

    NPort 5210 Series: 340 g (0.75 lb)
    NPort 5230 Series, NPort 5232/5232-T: 360 g (0.79 lb)
    NPort 5232I/5232I-T: 380 g (0.84 lb)

  • Installation

    Desktop, DIN-rail mounting (with optional kit), Wall mounting

Environmental Limits

  • Operating Temperature

    Standard Models: 0 to 55°C (32 to 131°F)
    Wide Temp. Models: -40 to 75°C (-40 to 167°F)

  • Storage Temperature (package included)

    -40 to 75°C (-40 to 167°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

Standards and Certifications

  • EMC

    EN 55032/24

  • EMI

    CISPR 32, FCC Part 15B Class A

  • EMS

    IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
    IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
    IEC 61000-4-5 Surge: Power: 1 kV
    IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
    IEC 61000-4-8 PFMF
    IEC 61000-4-11 DIPs

  • Safety

    UL 60950-1

  • Medical

    NPort 5210 Series: EN 60601-1-2 Class B, EN 55011

  • Maritime

    NPort 5230/5232 Series: DNV

Declaration

  • Green Product

    RoHS, CRoHS, WEEE