ST9120 MICR Printer

  Source Technologies MICR Printers 
 
 



Source Technologies ST9120 MICR Laser Printer
Fully refurbished with 1-year warranty
ST9120

Retired, no longer available: Contact for alternatives



Looking for ST9120 Parts?

28p2492 Toner Cartridge
28p2492 MICR Toner for 1120 1125 (4520 4525)
New
28p2492 MICR 15K Page yield Compatible (New)
$214.00



56p9019 Fuser


56P9019 Fuser Assembly 1120 1125
Fully refurbished with 90-day warranty
56p9019 Advanced Exchange

Retired, no longer available: Contact for alternatives



56p1036 Fuser Maintenance Kit


56P1036 IBM Fuser Maintenance Kit 1120 1125
Fully refurbished with 90-day warranty
56P1036 Advanced Exchange

Retired, no longer available: Contact for alternatives



56P1036 Fuser Maintenance Kit 1120 1125
Fully refurbished with 90-day warranty
56P1036

Retired, no longer available: Contact for alternatives


(#4505) 250-Sheet Drawer
28p1983 250-Sheet Drawer with Tray
New
28p1983 (New)
$199.00


(#4506) 500-Sheet Drawer
28p1984 500-Sheet Drawer with Tray
Fully refurbished with 90-day warranty
28P1984
$145.00



28p1984 500-Sheet Drawer with Tray
New
28p1984 (New)
$210.00


(#4401) 250-Sheet Duplex Unit
28P1978 Duplexer
Fully refurbished with 90-day warranty
28P1978

Retired, no longer available: Contact for alternatives



28P1978 Duplexer
New
28P1978 (New)

Retired, no longer available: Contact for alternatives



53p7946 500-Sheet Duplexer
Fully refurbished with 90-day warranty
53p7946 28P1978

Retired, no longer available: Contact for alternatives


(#4403) 250-Sheet Duplex Unit
53p7946 500-Sheet Duplexer
New
53P7946 28P1978 (New)

Retired, no longer available: Contact for alternatives



28P1978 Duplexer
New
28P1978 (New)

Retired, no longer available: Contact for alternatives



28P1978 Duplexer
Fully refurbished with 90-day warranty
28P1978

Retired, no longer available: Contact for alternatives


(#4501) 250-Sheet Tray
28P1979 250 Sheet Tray
Fully refurbished with 90-day warranty
28P1979
$28.00


(#4502) 500-Sheet Tray
28P1980 500-Sheet Tray Only
Fully refurbished with 90-day warranty
28P1980
$49.00



28p1982 (#4504) 400-sheet Universally Adjustable Tray (UAT)
28P1982 400 Sheet Universal Tray UAT
Fully refurbished with 90-day warranty
28P1982
$155.00



28p1985 (#4504) 250-sheet Universally Adjustable Tray (UAT)
28P1985 250-Sheet UAT Universal Drawer
Fully refurbished with 90-day warranty
28P1985



28p1986
28P1986 400 Sheet Universal Drawer with Tray UAT
Fully refurbished with 90-day warranty
28P1986


(#4511) Envelope Feeder
28p1987 Envelope Feeder
New
28P1987 (New)
$265.00



28p1987 Envelope Feeder
Fully refurbished with 90-day warranty
28p1987
$165.00


(#4520) 2,000-Sheet Drawer for Letter
28P1988 2000-Sheet Input Drawer
Fully refurbished with 90-day warranty
28P1988
$325.00


(#4521) 2,000-Sheet Drawer for A4
28p1989 High Capacity Paper Input
Fully refurbished with 90-day warranty
28p1989


650-Sheet output stacker
28p1990 650-Sheet Output Expansion
New
28p1990 (New)
$90.00


Staplesmart finisher
28p1991 StapleSmart Finisher
New
28P1991 (New)
$195.00


Output expansion

Mailbox

IPDS
28P1995 IPDS/SCS/TNE Card
Fully refurbished with 90-day warranty
28P1995
$149.00




(#4120) Token Ring attachment
28P1835 Token Ring
Fully refurbished with 90-day warranty
28P1835

Retired, no longer available: Contact for alternatives


(#4121) Token Ring-3 port
28P1836 Token-Ring-3 Port
New
28P1836 (New)
$285.00


(#4161) Ethernet 10BaseT/2
28P1837 10BaseT/2
Fully refurbished with 90-day warranty
28P1837



28p1838 (#4162) Ethernet 10BaseT/100BaseTX
28p1838 10/100 Ethernet for IBM InfoPrint
Fully refurbished with 90-day warranty
28P1838
$148.00


(#4163) Ethernet 10BaseT/100BaseTX-1 port
28P1839 Ethernet 10/100BaseTX-1 Port
Fully refurbished with 90-day warranty
28P1839
$266.00



(#4164) Ethernet 10BaseT/100BaseTX-3 port


(#4165) Ethernet 10/100BaseTX/10Base2-1 port

(#4141) Coax/Twinax Adapter for SCS
28p1842 Coax/Twinax Adapter
Fully refurbished with 90-day warranty
28P1842
$237.00


(#4130) Tri-Port Adapter
28p1843 Tri-Port Adapter
Fully refurbished with 90-day warranty
28P1843
$75.00



28p1844
28P1844 Infrared Adapter
Fully refurbished with 90-day warranty
28P1844
$45.00



28p1845
28P1845 External Serial Attachment
Fully refurbished with 90-day warranty
28P1845
$95.00



28p1846 (#4133) Parallel/USB Interface Card

(#4304) 4 MB Memory DIMM
28P1847 4 MB Memory DIMM
Fully refurbished with 90-day warranty
28P1847
$16.00


(#4308) 8 MB Memory DIMM
28P1848 8MB Memory
Fully refurbished with 90-day warranty
28P1848
$20.00


(#4316) 16 MB Memory DIMM
28P1849 16MB Memory
Fully refurbished with 90-day warranty
28P1849
$29.00


(#4332) 32 MB Memory DIMM
28P1850 32MB Memory
New
28P1850 (New)
$88.00


(#4364) 64 MB Memory DIMM
28P1851 64MB Memory
New
28P1851 Compatible (New)
$95.00


(#4390) 128 MB Memory DIMM
28P1852 Infoprint Brand 128MB Memory
New
28P1852 (New)
$277.00


(#4030) 2 MB Flash DIMM
28P1853 2 MB Flash DIMM
Fully refurbished with 90-day warranty
28P1853
$25.00


(#4032) 4 MB Flash DIMM
28P1854 4 MB Flash DIMM
Fully refurbished with 90-day warranty
28P1854
$124.00


(#4034) 8 MB Flash DIMM
28P1855 8 MB Flash DIMM
Fully refurbished with 90-day warranty
28P1855
$148.00


(#4036) 16 MB Flash DIMM
28P1856 16MB Flash DIMM
New
28p1856 (New)
$69.00



28p1858 (#4329) 5+ GB Hard Disk with Adapter
28P1858 5GB+ Hard Drive w/ Adapter
Fully refurbished with 90-day warranty
28P1858
$39.00


(#4821) ImageQuick** Card Feature
28P2599 ImageQuick** Card
New
28P2599 (New)
$89.00


(#4870) Bar Code Card Feature
28P1861 Bar Code Card
New
28P1861 (New)
$285.00



28p1862
28P1862 Optra Forms Software
New
28P1862 (New)

Retired, no longer available: Contact for alternatives



28p1863
28P1863 Optra Forms Director Software
New
28P1863 (New)

Retired, no longer available: Contact for alternatives


28P1864 Optra Forms 2MB Flash DIMM
Fully refurbished with 90-day warranty
28p1864
$223.00


28P1865 4MB Optra Forms Flash Memory
Fully refurbished with 90-day warranty
28P1865
$247.00


28P1866 8MB Optra Forms Flash Memory
Fully refurbished with 90-day warranty
28P1866
$247.00


28P1867 16MB Optra Forms Flash Memory
Fully refurbished with 90-day warranty
28P1867
$427.00


28P1868 Optra Forms** Hard Disk 5+GB
New
28P1868 (New)
$195.00



28p1869
28P1869 Optra Forms** 2-Key Security

28p1870
28P1870 Optra Forms** 3-Key Security

28p1871 (#4180) 10 Ft. Parallel Cable
28P1871 10 ft. Parallel Cable 1284
Fully refurbished with 90-day warranty
28p1871
$12.00



28p1872 (#4181) 20 Ft. Parallel Cable

28P1872 20 ft. Parallel Cable

28p1873 (#4135) Parallel 1284 C-B Adapter
28P1873 Parallel 1284 A-C Cable 3M
Fully refurbished with 90-day warranty
28P1873



28p1874 (#4183) 50 Ft. Serial Cable
28P1874 50 ft. Serial Cable

28p1875 (#4184) 2-meter USB Cable


28p1876
28P1876 Printer Stand

11k3435
11K3435 Serial / Parallel Card
Fully refurbished with 90-day warranty
11K3435
$19.00



  • 1200 x 1200 dpi, 20 ppm, provides fast performance at an exceptional price
  • Less than 9 seconds to first page print and ability to attach a variety of networks including Fast Ethernet, Token-Ring, Twinax and Coax
  • Duplex, flash memory and hard drive options give customers flexibility to efficiently manage documents of nearly all types and sizes
  • ImageQuick option ensures quality printing of Web and Intranet-based images as well as HTML, PDF, TIFF and other popular formats, directly to your ST9120

  • The ST9120 is an excellent printing solutions for small and medium workgroups. These printers offer tremendous value with their vast networking capabilities, all for an affordable price.

    Model Abstract ST9120
    ST9120 (up to 20 PPM) - an economical monochrome laser printer with the highest levels of reliability, and flexible paper options that small workgroups will appreciate.

    This printer also provides:
    • High-speed printing for a small-footprint desktop printer
    • Fast Ethernet, Token-Ring, Twinax, and Coax networking capability
    • Flexible paper input options with a capacity of over 3,000 sheets
    • A duplex option for two-sided printing
    Description

    The ST9120 is a 20 page-per-minute monochrome laser printers. They supply high-speed output, a fast processor (200 MHz minimum), a fast first page out time (9 seconds), and Token-Ring, Ethernet, Twinax, Coax connectivity options that are competitively priced.

    These printers also provide the option for Intelligent Printer Data Stream (IPDS) print capability, making them the perfect fit for IBM AS/400 environments. With an optional 2,000-sheet high-capacity input drawer, and high-capacity toner cartridge, they are excellent solutions for customers who wish to minimize user intervention.

    The ST9120 is an A4/Letter monochrome laser printer with print speed of up to 20 pages per minute.

    ST9120 media handling capabilities include:
    • One 250-sheet input tray and one 100-sheet auxiliary tray standard, for a 350-sheet standard input capacity
    • Three optional 500-sheet drawers and one optional 2,000-sheet drawer, for a maximum 3,850-sheet input capacity
    • Optional duplex capability for two-sided printing
    • 250-sheet standard output capacity Usage Rates

    The maximum monthly usage is as follows:

    100,000 impressions for the ST9120

    ST does not recommend printing to the monthly maximum on a consistent basis.

    ST9120:

    The ST9120 printer has two base models, two duplex models, two network models, and two duplex/network models. The base models include the printer with 8 MB memory.

    The duplex models include a 250-sheet duplex option and 8 MB of memory. Model D01 is the low voltage model and Model D02 is the high voltage model.

    The network models include a 10/100BaseTX Fast Ethernet card and 16 MB of memory. Model N01 is the low voltage model and Model N02 is the high voltage model.

    The duplex/network models include a 10/100BaseTX Fast Ethernet card, 16 MB of memory (same as the network models) and the duplex option. Model DN1 is the low voltage model and Model DN2 is the high voltage model. High-Performance Controller

    The ST9120 controller has a 200 MHz PMC-Sierra RM5231A processor.Printers come with robust data stream support with PCL 6, PostScript 3, and PPDS standard. IPDS is available as an option.

    Memory for ST9120:

    Base printer models and duplex models have 8 MB SDRAM standard. The network and duplex/network models have 16 MB SDRAM standard.

    The standard memory is soldered on the controller board. There are two memory slots available for SDRAM memory and flash memory. The controller supports a maximum of 264 MB of SDRAM memory (total of soldered and memory slots) for base and duplex models and 272 MB of SDRAM memory (total of soldered and memory slots) for network and duplex/network models.

    Printer System Attachment Interfaces:

    ST9120 base printer models, and the duplex models of ST9120 have an IEEE 1284 Parallel interface with a Type B connector and a USB interface.

    ST9120 Network printer models, and the duplex/network models have a USB interface and integrated 10/100BaseTX Fast Ethernet interface.

    Print Quality

    ST9120 support the following print resolutions:
    • 300 x 300 dpi (dots per inch)
    • 600 x 600 dpi (default resolution)
    • 1200 Image Quality (default driver resolution)
    • 1200 x 1200 dpi
    The toner darkness setting offers ten user-selectable settings to balance print darkness and toner savings. The higher the setting, the darker the print. Within the range of print darkness settings, up to 50% toner savings can be realized from a setting of one. The toner darkness setting is available through the operator panel under the Print Quality menu and also accessible from the print driver.

    Font Support for ST9120

    Both printers' resident fonts include support for following:

    Emulation # of Scalable Fonts # of Bitmapped Fonts
    --------- ------------------- --------------------
    PCL 6 84 2
    PostScript 156 0
    PPDS 39 5

    Models

    Model Summary Matrix
    9120

    Model Type Voltage
    ----- -------------- -------
    001 Base Low
    D01 Duplex Low
    N01 Network Low
    DN1 Duplex/Network Low

    Customer Setup (CSU)

    Technical Description

    Performance Specifications

    The maximum print speeds are shown in the following table. Actual performance depends on:
    • Interface to the host (serial, parallel, network)
    • Host system and application
    • Network complexity and traffic
    • Page complexity and content
    • Certain printer options installed and selected
    • Printer memory
    • Printer resolution
    • Media size, media type setting and tray source

    ST9120
    300,600 dpi, 1200 dpi
    Media 1200 IQ
    ------------------ ------------ --------
    Simplex Printing (pages per minute)
    Letter 20.0 ppm 10.1 ppm
    A4 19.2 ppm 9.6 ppm
    Legal 16.9 ppm 8.3 ppm
    Duplex Printing (sides per minute)
    Letter 22.7 spm 11.1 spm
    A4 21.4 spm 10.6 spm
    Legal 18.8 spm 9.2 spm

    Note: dpi = dots per inch.
    Note: 1200IQ = 1200 Image Quality resolution.

    First Copy Times are shown in the following table.
    ST9120
    Printer Mode Time (seconds)
    ---------------- --------------
    From Standby <9
    From Power Saver 45

    Note: First Copy time is defined as the elapsed time when hitting enter on the PC to the page exiting to the output bin. Paper is picked from the primary tray and paper exits to the primary output bin. Media is letter size paper printed in 300 and 600 dpi simplex printing.

    Usage Rates

    The maximum monthly usage of ST9120 is 100,000 impressions. ST does not recommend printing to this monthly maximum on a consistent basis.

    Print Quality

    The ST9120 supports the following print resolutions:
    • 300 x 300 dpi (dots per inch)
    • 600 x 600 dpi (default resolution)
    • 1200 Image Quality (default driver resolution)
    • 1200 x 1200 dpi
    The Toner Darkness setting offers ten user selectable settings to balance print darkness and toner savings. The higher the setting the darker the print. Within the range of print darkness settings up to 50% toner savings can be realized from a setting of one. The Toner Darkness setting is available through the operator panel under the Print Quality menu and also accessible from the print driver.

    Print Area

    The ST9120 printable area is limited to within 4.2 mm (0.167 in.) of top and bottom edges of the media and to within 6.25 mm (0.25 in.) of the left or right edges of the media. Any information placed outside this specified printable area will not print.

    Data Streams

    The ST9120 supports the following data streams:
    • PostScript Level 3 Emulation
    • Hewlett-Packard Company PCL 6 Emulation
    • Optional IPDS (Intelligent Printer Data Stream)
    • PPDS (Page Printer Data Stream) Migration Tool

    FONTS

    Fonts and Symbol Sets
    The ST9120 resident fonts include support for languages that use the following character sets:
    • Latin 1 (US, Western Europe, etc)
    • Latin 2 (Eastern Europe)
    • Latin 5 (Turkish)
    • Latin 6 (Baltic)
    • Cyrillic
    • Greek
    • Japanese (Katakana characters only)

    There are 83 symbol sets in the PCL 6 emulation to support all the languages that use these characters. The symbol set names are listed below. Not all symbol sets are supported by all fonts. Refer to the Technical Reference manual or use the printer operator panel to find which symbol sets are supported by each font.

    The ST9120 will have UTF-8 code support standard. UTF-8 code is a particular way in which fonts are accessed. UTF-8 is required for SAP printing and had previously only been available in the Barcode option card. Moving this function standard in the printers allows for SAP support out of the box. UTF-8 is available for PCL and PostScript fonts.

    The following table lists the number of fonts available in each emulation. The typeface names are shown below.

    Emulation # of Scalable Fonts # of Bitmapped Fonts
    --------- ------------------- --------------------
    PCL 6 84 2
    PostScript 156 0
    PPDS 39 5

    The fonts in the PCL emulation are compatible with the fonts in the HP4500 (HP trademark) and include four additional fonts and many extra symbol sets to support extra languages and applications. The fonts in the PostScript emulation are compatible with Adobe PostScript 3 and include 20 additional fonts.

    Additional fonts can be downloaded to the printer RAM or optional Flash DIMM or Hard Disk. PCL emulation supports both scalable and bitmapped downloadable fonts. PostScript emulation supports only downloadable scalable fonts, and PPDS emulation supports only downloadable bitmapped fonts. Font cards and font cartridges are not supported.

    Included on the CD-ROM shipped with the printer are a variety of downloadable fonts for Hebrew and Arabic and additional support for the Euro currency character.

    Also included on the CD-ROM is the FontVision Font Management utility and screen fonts to match the resident scalable fonts. An additional 48 TrueType fonts are available on the IBM Web site when a customer registers the printer.

    PostScript 3 Fonts

    Note: Font order is partially alphabetical and partially functional.
    PostScript 3 Font Names
    156 scalable fonts
    ------------------
    AlbertusMT
    AlbertusMT-Italic
    AlbertusMT-Light
    AntiqueOlive-Roman
    AntiqueOlive-Italic
    AntiqueOlive-Bold
    AntiqueOlive-Compact
    ArialMT
    Arial-ItalicMT
    Arial-BoldMT
    Arial-BoldItalicMT
    AvantGarde-Book
    AvantGarde-BookOblique
    AvantGarde-Demi
    AvantGarde-DemiOblique
    Bookman-Light
    Bookman-LightItalic
    Bookman-Demi
    Bookman-DemiItalic
    Coronet-Regular
    Courier
    CourierPS
    Courier
    Courier-Oblique
    Courier-Bold
    Courier-BoldOblique
    CourierPS Bold Oblique
    Courier-BoldOblique
    Garamond-Antiqua
    Garamond Halbfett
    Garamond-Kursiv
    Garamond-KursivHalbfett
    Helvetica-Light
    Helvetica-LightOblique
    Helvetica-Black
    Helvetica-BlackOblique
    Helvetica
    Helvetica-Oblique
    Helvetica-Bold
    Helvetica-BoldOblique
    Helvetica-Narrow
    Helvetica-Narrow-Oblique
    Helvetica-Narrow-Bold
    Helvetica-Narrow-BoldOblique
    Intl-CG-Times
    Intl-CG-Times-Italic
    Intl-CG-Times-Bold
    Intl-CG-Times-BoldItalic
    Intl-Univers-Medium
    Intl-Univers-MediumItalic
    Intl-Univers-Bold
    Intl-Univers-BoldItalic
    Intl-Courier
    Intl-Courier-Oblique
    Intl-Courier-Bold
    Intl-Courier-BoldOblique
    LetterGothic
    LetterGothic-Slanted
    LetterGothic-Bold
    LetterGothic-BoldSlanted
    Marigold
    NewCenturySchlbk-Roman
    NewCenturySchlbk-Italic
    NewCenturySchlbk-Bold
    NewCenturySchlbk-BoldItalic
    Optima
    Optima-Bold
    Optima-BoldItalic
    Optima-Italic
    Palatino-Roman
    Palatino-Italic
    Palatino-Bold
    Palatino-BoldItalic
    Symbol
    Times-Roman
    Times-Italic
    Times-Bold
    Times-BoldItalic
    TimesNewRomanPSMT
    TimesNewRomanPS-ItalicMT
    TimesNewRomanPS-BoldMT
    TimesNewRomanPS-BoldItalicMT
    Univers
    Univers-Oblique
    Univers-Bold
    Univers-BoldOblique
    Univers-Condensed
    Univers-CondensedOblique
    Univers-CondensedBold
    Univers-CondensedBoldOblique
    Wingdings-Regular
    ZapfChancery-MediumItalic
    ZapfDingbats
    Univers-Extended
    Univers-ExtendedObl
    Univers-BoldExt
    Univers-BoldExtObl
    Univers-Light
    Univers-LightOblique
    Clarendon
    Clarendon-Light
    Clarendon-Bold
    Helvetica-Condensed
    Helvetica-Condensed-Bold
    Helvetica-Condensed-BoldObl
    Helvetica-Condensed-Oblique
    StempelGaramond-Bold
    StempelGaramond-BoldItalic
    StempelGaramond-Italic
    StempelGaramond-Roman
    Apple-Chancery
    Chicago
    Geneva
    Monaco
    NewYork
    Oxford
    Taffy
    MonaLisa-Recut
    Candid
    Bodoni
    Bodoni-Italic
    Bodoni-Bold
    Bodoni-BoldItalic
    Bodoni-Poster
    Bodoni-PosterCompressed
    CooperBlack
    CooperBlack-Italic
    Copperplate-ThirtyTwoBC
    Copperplate-ThirtyThreeBC
    Eurostile
    Eurostile-Bold
    Eurostile-ExtendedTwo
    Eurostile-BoldExtendedTwo
    GillSans
    GillSans-Italic
    GillSans-Bold
    GillSans-BoldItalic
    GillSans-Condensed
    GillSans-BoldCondensed
    GillSans-Light
    GillSans-LightItalic
    GillSans-ExtraBold
    Goudy
    Goudy-Italic
    Goudy-Bold
    Goudy-BoldItalic
    Goudy-ExtraBold
    HoeflerText-Regular
    HoeflerText-Italic
    HoeflerText-Black
    HoeflerText-BlackItalic
    HoeflerText-Ornaments
    JoannaMT
    JoannaMT-Italic
    JoannaMT-Bold
    JoannaMT-BoldItalic
    LubalinGraph-Book
    LubalinGraph-BookOblique
    LubalinGraph-Demi
    LubalinGraph-DemiOblique

    PCL 6 Fonts
    Note: Font order is partially alphabetical and partially functional.
    PCL 6 Font Names
    84 scalable fonts
    -----------------
    Albertus medium
    Albertus Extra Bold
    Antique Olive
    Antique OliveItalic
    Antique Olive Bold
    Arial
    Arial Italic
    Arial Bold
    Arial Bold Italic
    ITC Avant Garde Book
    ITC Avant Garde Book Oblique
    ITC Avant Garde Demi
    ITC Avant Garde Demi Oblique
    ITC Bookman Light
    ITC Bookman Light Italic
    ITC Bookman Demi
    ITC Bookman Demi Italic
    Clarendon Condensed Bold
    Coronet
    CourierPS
    CourierPS Oblique
    CourierPS Bold
    CourierPS Bold Oblique
    CG Omega
    CG Omega Bold
    CG Omega Italic
    CG Omega Bold Italic
    Garamond Antiqua
    Garamond Halbfett
    Garamond Kursiv
    Garamond Kursiv Halbfett
    Helvetica Light
    Helvetica Light Oblique
    Helvetica Black
    Helvetica Black Oblique
    Helvetica
    Helvetica Italic
    Helvetica Bold
    Helvetica Bold Italic
    Helvetica Narrow
    Helvetica Narrow Italic
    Helvetica Narrow Bold
    Helvetica Narrow Bold Italic
    CG Times
    CG Times Italic
    CG Times Bold
    CG Times Bold Italic
    Univers Medium
    Univers Medium Italic
    Univers Bold
    Univers Bold Italic
    Courier
    Courier Italic
    Courier Bold
    Courier Bold Italic
    Letter Gothic
    Letter Gothic Italic
    Letter Gothic Bold
    Marigold
    Century Schoolbook Roman
    Century Schoolbook Italic
    Century Schoolbook Bold
    Century Schoolbook Bold Italic
    Palatino Roman
    Palatino Italic
    Palatino Bold
    Palatino Bold Italic
    SymbolPS
    Symbol
    Times Roman
    Times Italic
    Times Bold
    Times Bold Italic
    Times New Roman
    Times New Roman Italic
    Times New Roman Bold
    Times New Roman Bold Italic
    Univers Condensed Medium
    Univers Condensed Medium Italic
    Univers Condensed Bold
    Univers Condensed Bold Italic
    Wingdings
    ITC Zapf Chancery Medium Italic
    ITC Zapf Dingbats
    ZapfDingbats

    2 bitmapped fonts
    Line Printer 16
    POSTNET Barcode

    PPDS Fonts

    Note: Font order is partially alphabetical and partially functional.

    PPDS Font Names
    39 scalable fonts
    -----------------
    AvantGarde-Book
    AvantGarde-BookOblique
    AvantGarde-Demi
    AvantGarde-DemiOblique
    Bookman-Light
    ITC Bookman Light
    Bookman-Light
    Bookman-LightItalic
    Bookman-Demi
    Bookman-DemiItalic
    Courier
    Courier-Oblique
    Courier-Bold
    Courier-BoldOblique
    Helvetica-Light
    Helvetica-LightOblique
    Helvetica-Black
    Helvetica-BlackOblique
    Helvetica
    Helvetica-Italic
    Helvetica-Bold
    Helvetica-BoldItalic
    Helvetica-Narrow
    Helvetica-Narrow-Italic
    Helvetica-Narrow-Bold
    Helvetica-Narrow-BoldItalic
    CenturySchlbk-Roman
    CenturySchlbk-Italic
    CenturySchlbk-Bold
    CenturySchlbk-BoldItalic
    Palatino-Roman
    Palatino-Italic
    Palatino-Bold
    Palatino-BoldItalic
    Symbol
    TimesNewRoman
    TimesNewRoman-Italic
    TimesNewRoman-Bold
    TimesNewRoman-BoldItalic
    ZapfChancery-MediumItalic
    ZapfDingbats
    5 bitmapped fonts
    Courier 10
    Courier 12
    Courier 17.1
    Courier 10 Bold
    Boldface PS

    83 Symbol Sets
    Symbol Set Names
    ----------------
    ABICOMP Brazil/Portugal
    ISO 8859-1 Latin 1 (ECMA-94)
    Math-8
    ABICOMP International
    ISO 8859-2 Latin 2
    Greek-8
    DeskTop
    ISO 8859-5 Latin/Cyrillic
    Turkish-8
    Legal
    ISO 8859-7 Latin/Greek
    Roman-8
    MC Text
    ISO 8859-9 Latin 5
    Roman-9
    Microsoft Publishing
    ISO 8859-10 Latin 6
    Roman Extension
    Russian-GOST
    ISO 8859-15 Latin 9
    Ukrainian
    Ventura ITC Zapf Dingbats
    PCL ITC Zapf Dingbats
    PC-8 Bulgarian
    Ventura International
    PS ITC Zapf Dingbats
    PC-8 Danish/Norwegian (437N)
    Ventura Math
    PS Math
    PC-8 Greek Alternate (437G)
    Ventura US
    PS Text
    PC-8 Turkish (437T)
    Pi Font
    PC-8 Latin/Greek
    Windows 3.0 Latin 1
    Symbol
    PC-8 PC Nova
    Windows 98 Cyrillic
    Wingdings
    PC-8 Polish Mazovia
    Windows 98 Greek
    POSTNET Barcode
    PC-8 Code Page 437
    Windows 98 Latin 1
    Windows 98 Latin 2
    ISO: German
    PC-775 Baltic (PC-8 Latin 6)
    Windows 98 Latin 5
    ISO: Spanish
    PC-850 Multilingual
    Windows 98 Latin 6 (Baltic)
    ISO 2: IRV (Int'l Ref Version)
    PC-851 Greece
    ISO 4: United Kingdom
    PC-852 Latin 2
    ISO 6: ASCII
    PC-853 Latin 3 (Turkish)
    ISO 10: Swedish
    PC-855 Cyrillic
    ISO 11: Swedish for Names
    PC-857 Latin 5 (Turkish)
    ISO 14: JIS ASCII
    PC-858 Multilingual Euro
    ISO 15: Italian
    PC-860 Portugal
    ISO 16: Portuguese
    PC-861 Iceland
    ISO 17: Spanish
    PC-863 Canadian French
    ISO 21: German
    PC-865 Nordic
    ISO 25: French
    PC-866 Cyrillic
    ISO 57: Chinese
    PC-869 Greece
    ISO 60: Norwegian version 1PC-911 Katakana
    ISO 61: Norwegian version 2
    PC-1004 OS/2
    ISO 69: French
    ISO 84: Portuguese
    ISO 85: Spanish

    Note: Not all fonts support all of the symbol sets. Refer to the Technical Reference manual for your specific printer or use your printer operator panel to find which symbol sets are supported by each font.

    Media Support

    ST9120 Printer
    All models come standard with one 250 sheet paper drawer, one 100 sheet auxiliary tray and one standard 250 sheet output bin. See tables below for standard and maximum media capacities.

    Input Media Capacities (sheets)
    ST9120 Printer

    Total
    Aux. Tray Drawer 1 Drawer 2 Drawer 3 Drawer 4 Drawer 5 Capacity
    --------- -------- -------- -------- -------- -------- --------

    Standard 100 250 350

    Maximum 100 250 500 500 500 2000 3850

    Note: When the Envelope Feeder option is installed, the auxiliary tray is not useable. Optional drawers 2-5 can be any combination of 250-sheet drawers, 500-sheet drawers or 2,000-sheet drawers as long as no more than one is a 2,000-sheet drawer.

    Output Media Capacities (sheets)

    ST9120 Printer

    This printer has a 250 sheet output bin and there are no output features.

    Media Sizes Supported

    Input Media for ST9120
    250 1 250- 400-
    500- Sheet Sheet 2000-
    Tray Sheet Univ. Univ. Sheet Env.

    Paper Size & Type Aux. 1/2 Tray Tray Tray Drawer Feed
    ------------------------ ---- ---- ----- ----- ----- ------ ----
    A4 (210x297 mm) Yes Yes Yes No No Yes No
    Letter (8.5"x11"] Yes Yes Yes No No Yes No
    A5 (148x210 mm) Yes Yes Yes No No Yes No
    B5-JIS (182x257 mm) Yes Yes Yes No No Yes No
    Legal (8.5"x14"] Yes Yes Yes No No Yes No
    Executive (7.25"x10.5"] Yes Yes Yes No No Yes No
    Folio (8.5"x13"] Yes Yes Yes No No No No
    Statement (5.5"x8.5"] Yes Yes Yes No No No No
    7 3/4 Env. (98x191 mm) Yes No No No No No Yes
    9 Env. (98x225 mm) Yes No No No No No Yes
    Commercial #10 Env. Yes No No No No No Yes
    (104.8x241.3 mm)
    C5 Env. (169x229 mm) Yes No No No No No Yes
    B5 Env. (176x250 mm) Yes No No No No No Yes
    DL Env. (110x220 mm) Yes No No No No No Yes
    Other Env.(1) Yes No No No No No Yes
    Universal(2) Yes Yes Yes Yes Yes No No
    Universal(3) Yes No No Yes Yes No No
    Universal(4) Yes Yes Yes Yes Yes No No
    Paper Yes Yes Yes Yes Yes Yes No
    Transparencies Yes Yes Yes Yes Yes No No
    Cardstock Yes Yes Yes Yes Yes No No
    Vinyl Labels Yes Yes Yes Yes No No No
    Paper Labels Yes Yes Yes Yes Yes No No
    Polyester Labels Yes Yes Yes Yes Yes No No
    Dual Web Labels Yes Yes Yes Yes Yes No No

    Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.)
    Note: (2) Size 139.7x210mm to 215x355.6mm (5.5x8.27 in. to 8.5x14 in.)
    Note: (3) Size 69.85x127mm to 215.9x355.6mm (2.75x5 in. to 8.5x14 in.) 250-sheet Universal tray does not support index cards 400-sheet Universal tray supports paper no shorter than 7 in.
    Note: (4) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.)

    Media Type and Weights Supported

    Input Media for ST9120
    Aux & 250-Sht 500-Sheet tray

    Print Media (6) (7) 2000-Sht Drwr Env. Feeder
    ------------------ ------------- -------------- ------------- -----------
    Copier/Xerographic 60-135 gsm 60-135 gsm 60-135 gsm No
    16-36 lb 16-47 lb 16-36 lb
    Card Stock Upper
    Limit grain Long(1)
    - Index-Bristol 120 gsm (67lb) 163 gsm (90lb) No No
    - Tag 120 gsm (74lb) 163 gsm (100lb) No No
    - Cover 135 gsm (50lb) 176 gsm (65lb) No No

    Card Stock Upper
    Limit grain Short(1)
    - Index-Bristol 163 gsm (90lb) 199 gsm (110lb) No No
    - Tag 203 gsm (125lb)203 gsm (125lb) No No
    - Cover 176 gsm (65lb) 216 gsm (80lb) No No

    Transparencies 138-146 gsm 138-146 gsm No No
    37-39 lb 37-39 lb No No

    Labels Upper Limit(2)
    - Paper 163 gsm (43lb) 180 gsm (48lb) No No
    - Dual Web 163 gsm (43lb) 180 gsm (48lb) No No
    - Polyester 220 gsm (59lb) 220 gsm (59lb) No No
    - Vinyl(8) 260 gsm (78lb) 300 gsm (92lb) No No

    Integrated Forms
    - Pressure Area(3) 140-175 gsm 140-175 gsm No No
    - Paper Base 75-135 gsm 75-135 gsm No No
    20-36 lb 20-36 lb

    Envelopes(6) 60-105 gsm No No 60-105 gsm
    (Sulfite, wood-free 16-28lb bond(4) 16-28 lb(5)
    or up to 100% cotton bond)

    Note: All media specified in lb is bond.
    Note: (1) For 60 to 176 g/m2 paper, grain long fibers are recommended. For papers heavier than 176 g/m2, rain short is preferred.
    Note: (2) Dedicated label printing requires special label fuser cleaner. When using the label fuser cleaner, duplex printing is not supported.
    Note: (3) Pressure sensitive area must enter the printer first.
    Note: (4) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond bond envelopes are limited to 25% cotton content. This spec applies to the auxiliary tray, not the optional 250-sheet drawer.
    Note: (5) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond bond envelopes are limited to 25% cotton content.
    Note: (6) The duplex option supports the same weights and types as the printer except for transparencies, envelopes, and labels. Integrated trays include the standard 500 tray and the 400-UAT tray in the integrated tray position.
    Note: (7) Optional 250-drawers include the 250-UAT drawer. Optional 500-drawers include the 400-UAT drawer.
    Note: (8) Vinyl labels are not supported by Fountain High(n) or the 400-UAT tray and 400-UAT drawer.

    Additional Media Guidelines

    Follow the media guidelines below for successful printing:

    Paper
    Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.
    Colored papers must be able to withstand 190 deg C (400 deg F) fusing temperature.
    Preprinted forms and letterheads should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with the ST9120.
    Unsuitable papers include multipart forms and documents; chemically treated papers; coated, synthetic and thermal papers; and preprinted papers requiring a high degree of registration.

    Recycled paper less than 80g/sqm may cause unacceptable results.

    Envelopes

    All envelopes should be new, unused, and without package damage.

    Envelopes with excessive curl or twist exceeding 6 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.

    Minimum weight: 75 g/m2 (20 lb.)

    The following envelopes should not be used:

    Envelopes with windows, holes, perforations, cutouts, or deep embossing.

    Envelopes with metal clasps, string ties, or metal folding bars.

    Envelopes with exposed flap adhesive when the flap is in the closed position.

    For best results, printing on new 90 g/m2 (24 lb.) sulfite or 25% cotton bond envelopes is recommended.

    Under high humidity conditions (over 60%), envelopes may seal during printing.

    Transparencies

    Use letter or A4-size sheets only.

    Transparencies specifically designed for xerographic copy machines or laser printers may be used with the ST9120.

    Labels

    Labels should be selected using guidelines found in the User's Reference, Complete Printer Reference, and tested for acceptability.

    Paper Sensing

    The ST9120 printers have the following paper sensors:

    Standard Optional Optional Optional

    Input 250/500 2000-Sht. Envelope

    Sensing Function Trays Drawers Drawer Feeder

    --------------------------- -------- -------- --------- --------

    Paper Size Sensing

    Paper Tray Yes Yes Yes No

    Auxiliary Tray No No No No

    Paper Out Sensing

    Paper Tray Yes Yes Yes Yes

    Auxiliary Tray Yes No No No

    Tray Present Sensing

    Paper Tray Yes Yes Yes No

    Auxiliary Tray No No No No

    Envelope Conditioning Yes No No No

    Misc. Other

    Narrow Media Yes No No No

    Auto Size Yes No No No

    Tray Low Yes Yes No No

    Pass Through No Yes Yes Yes

    Cover Open/

    Cartridge Present Yes No No No

    Input Sensor Yes No No No

    Fuser Exit Yes No No No

    Differences between Infoprint 11xx IPDS and Previous IBM Printers

    The Infoprint 11xx printers have a different level IPDS support than the previous IBM workgroup printers. Some key differences are:

    For emulation, the Infoprint 11xx printers emulate the 4028, 4312, 4317, 4324, 3812/16, and 3112/16. These are LF1 emulations ONLY.

    Infoprint 11xx printers do not support "Manage IPDS Dialog".

    Infoprint 11xx printers do not support Tray Protection.

    Infoprint 11xx printers do not support Edge Protection.

    Details on Card for IPDS and SCS/TNe Emulation

    Product Overview:

    The SCS/TNe or IPDS configuration settings can be changed using MarkNet print server's resident web server, a browser and the printer's IP address.

    For IPDS emulation printing, the capture of outline fonts (LF3) is now supported.

    For Infoprint 1140/1130 and IPDS emulation, staple and offset stacking for the finisher are supported.

    For Infoprint 1145 and IPDS emulation, offset stacking is supported in the printer's standard bin and the finisher bin. Stapling is supported for the finisher.

    These affordable Cards for IPDS and SCS/TNe provide configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers. These Cards for IPDS and SCS/TNe are compatible with IBM mainframe or IBM AS/400 applications that generate SCS (LU1) output or with applications that output AFP/IPDS through Print Services Facility (PSF).

    IBM continues to make it easy for IS/IT managers to have an affordable printing solution in a distributed network or on a LAN for applications or software that generate AFP/IPDS or SCS. This includes:

    Using AFP/IPDS and PSF, capture fonts to hard disk or to flash memory resulting in reduced network traffic over LAN, coaxial or twinaxial connections.

    Supports TN3270E or TN5250E SCS (LU1) over the LAN using TCP/IP with Telnet.

    No changes to host applications.

    Supports emulation of common IBM IPDS and SCS printers.

    Additional or new remote controllers with twinax or coax cabling are unnecessary. However, twinax and coax connections continue to be available using the Coax/Twinax Adapter for SCS.

    One LAN printer can print LAN (PostScript, PCL, etc) and mainframe or AS/400 documents (AFP/IPDS, SCS).

    With a card and the standard Ethernet network port or a MarkNet print server using TCP/IP, the printer becomes an IBM host workstation printer capable of printing AFP/IPDS or SCS documents from an AS/400 or System/390 computer.

    With the appropriate host software and one of these options, the IBM printer emulates an IBM mainframe or AS/400 host printer. See the compatibility section for details.

    With the TN3270E and TN5250E extended Telnet protocol support in these options, the printer emulates one TN3270E printer session and up to 4 TN5250E printer sessions using the LU1 SCS data stream over TCP/IP. This is supported directly from an AS/400 or from a mainframe using TCP/IP or through any TN3270E capable gateway that supports TN3270E according to RFC 2355. The DSC/DSE or SCS data streams over LU3 or LU0 are not supported. The Telnet protocol function is only supported with through the standard Ethernet network port or with the MarkNet N2000 print servers. See the compatibility section for more details.

    For IPDS emulation, the card supports resident scalable fonts and 300, 600, 1200 image quality or 1200 dpi (except Infoprint 1145) print resolutions. The resolution is selected through an IPDS MENU setting. This setting determines the print resolution of IPDS text, graphics, bar code, scalable image and scalable font data.

    The printer can be configured to take advantage of additional RAM, and when attached to a LAN through the standard Ethernet port or a MarkNet print server, can save IPDS resources to improve performance for complex IPDS print jobs with host resources such as fonts, overlays or page segments.

    The IPDS emulation supports the IPDS data and resource towers. Fonts can now be downloaded, captured and saved to hard disk or flash memory in the printer. The US Postal Bar code POSTNET font and the Euro currency symbol are supported within IPDS.

    The Euro currency symbol is also supported for the SCS, PostScript and PCL 6 emulations.

    Fonts

    AFP/IPDS Font and Typestyle Support:

    The Card for IPDS supports resident scalable fonts. The font complement with 12 typestyles supports the IBM Font Collection (Core Int erchange Scalable Font Sets - Courier, Times New Roman and Helvetica faces).

    The following languages are supported:

    Latin 1: Afrikaans, Belgian (French and Dutch), Brazilian Portuguese, Canadian English, Canadian French, Catalan, Danish, Dutch, Finnish, French, German, Icelandic, Italian, Latin American Spanish, Norwegian, Portuguese, Spanish (Castillian), Swedish, Swiss (German, French and Italian), United Kingdom English, United States English

    Latin 2/ROECE: Albanian, Croatian, Czech, East German, Hungarian, Polish, Romanian, Serbian, Slovak, Slovenian

    Latin 3, 4, 5 and 6: Maltese, Turkish, Estonian, Greenlandic, Lappish, Latvian, Lithuanian

    Greek

    Cyrillic for: Bulgarian, Byelorussian, Macedonian, Russian, Serbo-Croatian, Ukrainian.

    The font complement for the IBM Coordinated Scalable Font Set provides support for Latin 1 languages in 3 Letter Gothic (medium, bold and italic) and 3 Prestige (medium, bold and italic) scalable typestyles. Scalable OCR-A and OCR-B typestyles are supported.

    The following fonts are supported using bitmaps: APL 12, Boldface PS, Boldface Italic PS, OCR-A 10, OCR-B 10 and Prestige PS. The OCR bitmap fonts have different FGIDs than the scalable font versions.

    The IBM 4028 Compatibility Font set consists of 22 fixed pitch typestyles supported by bitmap fonts. Times Roman typestyles (13) are created from Times New Roman scalable typestyles of the same weight and style.

    The IBM 3812/3816 Compatibility Font set consists of 35 typestyles supported by bitmap fonts at 240 dpi.

    Font Capture

    Fonts can also be captured dynamically and saved (cached) to hard disk or flash memory in the printer using PSF/MVS V2.2.0 and PSF/400 V4R2 or later. A captured font then appears as a printer resident font. If many fonts are used in the jobs that are printed, capturing fonts and saving them in the printer will decrease network traffic on busy networks.

    PSF defines fonts as either public or private. In order to capture a font, it must be marked as eligible and public. A private font is not eligible to be captured.

    Note: Do not mark sensitive fonts such as signatures and MICR fonts as eligible to be captured. Check the font licensing information before a font is made eligible for capture.

    If a font is to be captured, the appropriate files for the coded font or character set and code page resources must all be marked.

    The printer must also be defined as capable to capture fonts in PSF. For bitmap fonts, the font resolution of the font captured must match the resolution of the emulated printer for it to be recognized by the printer as a printer resident font. For example, the IBM 3812 and 3816 printer emulations require 240 dpi fonts. The IBM 4028 printer emulation requires 300 dpi fonts.

    AS/400

    On the AS/400, Font capture is supported by AS/400 OS/400 V4R5 or later. To define the printer as capable to capture, in the PSF configuration (CRTPSFCFG), set FNTCAPTURE (*YES).

    Eligible fonts must be marked. Display the font attributes to identify marked fonts (DSPFNTRSCA). Check for FNTCAPTURE (*YES). Use Create Font Resource (CRTFNTRSC) to mark font resources from other systems. Use Change Font Resource (CHGFNTRSC) to mark fonts that are not marked as eligible.

    For a font to be eligible for capture, it must have non zero fields for FGID and GCSGID. Any fonts captured and saved in the printer's hard disk or flash memory are saved across instances of the writer.

    Mainframe (MVS and VSE)

    Font capture is supported by PSF/MVS 2.2.0 with APAR 0W08340. With PSF/MVS, use APSRMARK to mark eligible fonts if they are not already marked. The IBM Font Collection fonts are already marked as eligible for capture.

    Font capture is supported by PSF/VSE 2.2.1 with APAR DY43969. With PSF/VSE, use APSRMARK to mark eligible fonts if they are not already marked.

    SCS Font and Typestyle Support

    The SCS emulation uses the default resolution set using the Quality menu from the printer's operator panel. The SCS emulation in the card uses PCL fonts from the printer firmware. If the printer is set to 600 dpi, then all SCS data is printed with 600 dpi PCL fonts. It is possible to imbed PCL and PJL commands into the SCS data stream and pass them to the printer utilizing ASCII transparency.

    On the AS/400, fonts can be selected by specifying the FGID (Font Global Identifier) or by characters per inch (CPI). With IBM mainframes, only CPI font selection is possible.

    A parameter in the SCS data stream (Final Form Text (Level 2) Document Content Architecture (FFT (L2) DCA)) Page Presentation media (PPM) command is used to control Duplex printing.

    These 6 fonts are included in SCS emulation as 300 dpi bitmap fonts: OCR-B (3), Boldface Italic (155), Boldface (159), Essay (160), Essay Bold (163) and Document (175).

    Compatibility

    For the Card for IPDS and SCS/TNe, IPDS is supported under the IPDS MENU settings and SCS is supported under the SCS/TNe MENU settings.

    Support Notes:

    Microcode updates and User's Guides are available from the IBM Web site.

    See the appropriate User's Guide for configuration instructions.

    When the printer is emulating an IBM printer, the function supported depends on the IBM host software.

    For Direct Network Attachment - Hardware Compatibility

    When the printer contains an optional Card for IPDS and SCS/TNe, it attaches to a network using one of the following MarkNet print servers:

    Standard Ethernet (100BaseTX/10BaseT) Network port in the printer

    MarkNet** N2000 Series print servers

    MarkNet X2000 Series print servers (AFP/IPDS only)

    MarkNet Pro print servers (AFP/IPDS only)

    The optional MarkNet print servers support Token-Ring (4Mbps or 16 Mbps), Ethernet 10BaseT/10Base2 and Ethernet 100BaseTX/10BaseT with the following Network Operating Systems: Novell NetWare (including NetWare Directory Services - NDS and NDPS), Microsoft Windows NT 4.0 Server, Microsoft Windows 2000 Server and Advanced Server, TokenTalk and EtherTalk, and the following UNIX platforms: Caldera OpenLinux, IBM AIX, Compaq Tru64 (Digital), HP-UX, Red Hat Linux, SCO OpenServer, UnixWare, SGI IRIX, Sun Solaris, Sun Solaris x86, SuSE Linux and TurboLinux.

    Notes:

    MarkNet N2000 microcode level 3.15.x or later is required for SCS/TNe support.

    For OptraImage network ports, microcode level 5.15.x or later is required for SCS/TNe support.

    Any MarkNet X2000 microcode level provides AFP/IPDS support only.

    For IPDS printing, a minimum of 16MB of printer memory is required.

    Software Compatibility for AFP/IPDS Printing over TCP/IP

    The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are:

    Print Services Facility(PSF)/MVS Version 2.2 or later

    Application System(AS)/400 Operating System(OS)/400 V4R5, V5R1 or later through PSF/400 (See Note)

    PSF for OS/2 (PSF/2) 2.0 or later

    PSF for AIX (PSF/6000) 2.1 or later

    Note: With AS/400 OS/400 V4R5 or OS/400 V5R1, to print IPDS over TCP/IP through PSF/400, PTF SF29249 - WRKAFP2 is required.

    Software Compatibility for SCS LU1 Printing over TCP/IP

    The IBM AS/400 software requirements for TN5250e SCS (LU1) printing using up to 4 sessions when the printer is emulating an IBM 3812-01 printer are:

    AS/400 OS/400 V4R5, V5R1 or later with all PTFs applied

    Note: Up to four (4) TN5250e sessions from multiple hosts are supported; however the SCS Menu options settings for all 4 sessions are the same.

    The IBM mainframe software requirements for TN3270e SCS (LU1) printing using one session when the printer is emulating an IBM 3287 printer are:

    IBM Communications Server (CS) for OS/390 Version 2 Release 5 or later on ESA systems (Note: all appropriate APARs must be applied)

    TCP/IP for MVS Version 3 Release 2 or later

    TCP/IP for VM/ESA Version 2 Release 4 or later (function level 310 or later)

    TCP/IP for VSE/ESA V1 R3 or later using General Print Server Feature

    Using Cisco 7500 Series Routers

    SCS LU1 Printing using a Gateway and TCP/IP

    If TN3270E capable SNA gateway software supports the TN3270E protocol according to RFC 2355, then a TN3270e session can be used to print SCS jobs directly from a mainframe or AS/400. Examples of these gateways are:

    IBM SecureWay Communications Server 6.0.2 for Windows NT 4.0, Windows 2000, AIX, UnixWare 7, OS/2 Warp

    Microsoft NetResults SNA Server 4.0

    Novell NetWare for SAA 4 as either a TN3270E Server or TN5250 Server

    Attachmate E-Vantage SNA Gateway 2.0

    Barr Systems Communications Server

    Cisco TN3270 Server

    OpenConnect using the WebConnect SNA Access Server or SNA Print Server

    For Direct Twinaxial Attachment - Hardware Compatibility

    When the printer contains an optional Card for IPDS and SCS/TNe and the Coax/Twinax Adapter for SCS (P/N 44H0011) with a twinaxial cable, the printer attaches to the following IBM hardware:

    AS/400e servers and e-systems

    AS/400 Twinaxial Workstation Controllers

    AS/400 Advanced System/36 Twinaxial Workstation Controller

    5494 Remote Control Unit

    5394 Remote Control Unit

    Notes:

    Coax/Twinax Adapter for SCS (P/N 44H0011) microcode level H02-8491 or later is required.

    There must be two separate twinax addresses, one for the SCS emulation using the Adapter for SCS and another for the Card's IPDS emulation. The Adapter for SCS does not require the Card for IPDS and SCS/TNe to support SCS.

    The Coax/Twinax Adapter for SCS provides SCS data stream support for a twinax connection that requires both IPDS and SCS data stream support when using the Card for IPDS and SCS/TNe.

    For Direct Twinaxial Attachment - Hardware Compatibility

    The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are:

    AS/400 PSF/400 V3R2, V3R1, V3R6, V3R7, V4R1, V4R2, V4R3, V4R4 or later

    AS/400 OS/400 V3R2, V3R1

    AS/400 OS/400 V3R6, V3R7, V4R1, V4R2, V4R3, V4R4 or later

    AS/400 OS/400 V3R6 with System Support Program (SSP) Release 7.5*

    AS/400 SSP Release 7.1 *

    IPDS Advanced Function PRPQ is required if using the Card for IPDS.

    For Direct Coaxial Attachment - Hardware Compatibility

    When the printer contains the Card for IPDS and SCS/TNe and the Coax/Twinax Adapter for SCS with a coaxial cable, the printer attaches to the following IBM hardware:

    IBM 3174 Control Unit

    ES/9000 Work Station Subsystem Controller

    IBM 3174 compatible control units

    Notes:

    Coax/Twinax Adapter for SCS microcode level H01-9072 or later is required.

    The Coax/Twinax Adapter for SCS provides SCS data stream support for a coax connection that requires both IPDS and SCS data stream support when using the Card for IPDS and SCS/TNe.

    For Direct Coaxial Attachment - Software Compatibility

    The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are as follows:

    Any application or host software that generates the AFP/IPDS data stream for one of the emulated printers such as:

    PSF/MVS V2.2 or later

    PSF/VSE V2.2.1, V2.2.0

    PSF/VM V2.1.1, V2.1.0 (with maintenance)

    VTAM Printer Support R70 or later (VPS - Levi, Ray & Shoup (LRS) software

    GDDM V2.3 with APARs

    RSCS V3.2 or later

    Coax/Twinax Adapter for SCS Feature (FC 4141)

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    The Coax/Twinax Adapter for SCS provides SCS (for Coax, DSC/DSE) data stream support with ST9120 printers for IBM mainframe and AS/400 customers who must print SCS over distributed SNA networks using a coaxial or twinaxial cable connected printer.

    Physical Specifications

    ST9120 Printer

    Dimensions

    Width Depth Height Weight

    ------------- ------------- ------------ ------

    Base Network 400 mm(15.7"] 513 mm(20.2"] 340 mm(13.4"] (1)

    Printer

    Note: (1) Weights for low voltage and high voltage modes are the same.

    Recommended Clearances

    Left/Right Front Back Top

    ------------- ----------- ------------- ---------------

    Base Network 304.8 mm(12"] 508 mm 20"] 304.8 mm(12"] 137.16 cm(4.5')

    Printer

    Operating Environment

    Electrical Specifications for ST9120

    Low Voltage Models

    100 - 127 VAC at 47 to 63 Hz, nominal

    99 - 133 VAC at 47 to 63 Hz, extreme

    High Voltage Models

    200 - 240 VAC at 47 to 63 Hz, nominal

    198 - 254 VAC at 47 to 63 Hz, extreme

    Power Consumption & Thermal output

    ST9120

    Printing States 1120 Base 1120 N 1125 Base 1125 N

    --------------------------- ----------- --------- --------- ---------

    Ave. Power While Printing

    - Base Printer 429 watts 432 watts

    - With All Options

    Ave. Power While Idle

    - Power Saver ON 18 watts 21 watts

    - Power Saver OFF 81 watts 84 watts

    Max. Current While Printing

    - 110 Volts 9.7 amps 9.7 amps

    - 220 Volts 5.2 amps 5.2 amps

    Notes:

    Using a 220 V ac to 110 V ac power converter with the low voltage model is not recommended.

    All models are ENERGY STAR compliant.

    Acoustics for ST9120

    All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

    Meter Average Sound Pressure, dBa

    1-meter Average Declared Sound

    Mode Sound Pressure Power Level

    ---------------- --------------- --------------

    600 dpi printing 51 dBa bels (A)

    Idle (Standby) 30 dBa bels (A)

    Software

    MarkVision Professional and printer drivers are provided on the Drivers, MarkVision, and Utilities CD that is packaged with the printer. See Publications section for details. MarkVision Professional for Sun Solaris, SuSE Linux, Red Hat Linux, HP-UX and IBM AIX operating systems are available from the IBM Web site.

    The Windows software applications, which operate in the operating systems listed above, are best suited to run with the drivers supplied with the printer. These drivers for Windows take advantage of your printer functions and increase the printer performance wherever possible.

    Operating Systems

    Infoprint 1120 is compatible with applications running under the following operating systems for either local bror network connections: For information about USB connections, see Local Connections.

    Apple Macintosh

    Apple Macintosh System 7.5 Operating System or later with Tri-Port Adapter or MarkNet** Print Server

    Apple MacOS 8.6 or later with USB Interface or MarkNet Print Server

    Apple MacOS X

    Download the printer PPD file or printer driver from the IBM Web site.

    Microsoft Windows

    Microsoft Windows 95 4.00.950 or later

    Microsoft Windows 98, 2nd Edition

    Windows Me

    Microsoft Windows NT 4.00

    Microsoft Windows NT 4.00 Server

    Microsoft Windows 2000 Professional

    Microsoft Windows 2000 Server

    Microsoft Windows 2000 Advanced Server

    Download the latest printer drivers from the IBM Web site.

    Novell

    Novell NetWare** 3.x, 4.x, 5.x including full DNS and NDPS support.

    Novel** Distributed Print Services** (NDPSTM) 2.0 or later with IBM NDPS IP Gateway.

    Novel NetWare Enterprise Print Services (NES) with IBM NDPS IP Gateway.

    Download the NDPS IP Gateway from the IBM Web site.

    Linux

    Caldera eDesktop 2.4

    Red Hat Linux 6.x, 7.0

    SuSE 6.3, 6.4, 7.0 Linux

    TurboLinux Workstation 6.0, 6.1

    Download the Enhanced Printer Drivers from the IBM Web site.

    UNIX

    Compaq Tru64 (Digital) UNIX 4.0D

    HP-UX 10.x, 11.x

    IBM AIX 4.2.1 or higher

    SCO OpenServer 5.0.4 or higher

    SGI IRIX 6.x

    Sun Solaris x86 2.6, 7, 8

    Sun Solaris 2.6, 7, 8

    UnixWare 7.x

    Download the Enhanced Printer Drivers from the IBM Web site.

    Other

    Virtually any platform supporting TCP/IP

    IBM AS/400 Systems with TCP/IP with OS/400(R) V3R1 or later using OS400 Host Print Transform

    The software applications that operate with most Apple LaserWriter printers will generally operate with the ST9120. The Macintosh 128, 512, and 512e Computers are not supported.

    Management Solutions (MarkVision**)

    MarkVision Professional, MarkVision Messenger, NetPnP and Software Installation and Distribution tools are provided on Drivers, MarkVision and Utilities CDs.

    MarkVision Professional

    MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devises in an enterprise environment via a web browser. It provides IT administrators with realtime device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.

    MarkVision Messenger

    MarkVision Messenger provides real-time notification of printer conditions via e-mail, paging, or other applications and facilitates automated responses to these conditions before they become critical and disruptive to user productivity. MarkVision Messenger enhances administrators' quality for service and improves end-user productivity and satisfaction.

    NetPnP (provided on CD)

    NetPnP senses when a new IBM printer is attached to the network and automatically creates a shared printer object on the Windows NT 4.0 or Windows 2000 system. Furthermore, NetPnP notifies end-users via e-mail that the new network printer is available for printing. Designed for Windows NT 4.0 and Windows 2000 environments, Net PnP makes the ST9120 printers available to end-users within seconds of network attachment.

    Software Installation and Distribution tools (provided on CD)

    In Windows NT 4.0 and Windows 2000 environments, these tools enable administrators to push printer software installation to other Windows NT 4.0 or Windows 2000 workstations or to write a script that will install specified printer software on specified Windows NT 4.0 or Windows 2000 workstations on the network. In Windows 9X environments, it enables administrators to write installation scripts that can then be distributed to other workstations. When executed, these scripts will silently install all specified IBM software.

    Solaris Ready for Sun Customers

    These printers are certified Solaris Ready by Sun and include ST9120 Enhanced Printer Drivers for Sun Systems and Sun specific documentation seamless installation and use in Sun Solaris environments. The IBM network printers are Ethernet-ready for use in Sun networks.

    The IBM printers with USB interfaces are certified for USB attachment to Sun Blade workstations and Sun Ray appliances. MarkVision Professional is available from the IBM Web site.

    IBM Network Printer Manager (NPM)

    NPM will have generic support for ST9120.

    IBM Infoprint Manager

    Infoprint Manager will have generic support for ST9120.

    Network Printer Resource Utility (NPRU)

    NPRU will not support the ST9120.

    TCP/IP Network Port Monitor Utility

    This utility will not support the ST9120.

    LPR Remote Printing Client Utility

    This utility will not support the ST9120.

    Special Feature Codes -- Chargeable

    Note: Some of these features may no longer be available. Always check announcement letters to ensure if specific features listed here are available.

    ST9120

    Mach Feature Part

    Type Model Number Number Description UPC Code

    ---- ----- ------- ------- ------------------------------ ---------------

    4520 001 28P2450 ST9120 US (LV)

    4520 D01 28P2451 ST9120 d US (LV)

    4520 N01 28P2452 ST9120 n US (LV)

    4520 DN1 28P2453 ST9120 dn US (LV)

    28P2490 250-Sheet Duplex Unit

    28P1979 250-Sheet Tray

    28P1980 500-Sheet Tray

    28P1981 250-Sheet Universal Tray

    28P1982 400-Sheet Universal Tray

    28P1983 250-Sheet Drawer

    28P1984 500-Sheet Drawer

    28P1985 250-Sheet Universal Drawer

    28P1986 400-Sheet Universal Drawer

    28P1987 Envelope Feeder

    28P1988 2,000-Sheet Drawer (Letter)

    28P1989 2,000-Sheet Drawer (A4)

    28P1835 Token-Ring

    28P1836 Token-Ring-3 Port

    28P1837 Ethernet 10BaseT/2

    28P1838 Ethernet 10/100Base-TX

    28P1839 10/100BaseTX-1 Port

    28P1840 10/100BaseTX-3 Port

    28P1841 Ethernet 10/100TX/10Base2-1 pt

    28P1842 Twinax/Coax Adapter for SCS

    28P1843 Tri-Port Adapter

    28P1844 Infrared Adapter

    28P1845 External Serial Adapter

    28P1846 USB/Parallel 1284-C Card

    28P1995 Card for IPDS & SCS/TNe

    28P1996 ImageQuick** Card

    28P1997 Bar Code Card

    28P1847 4 MB Memory DIMM

    28P1848 8 MB Memory DIMM

    28P1849 16 MB Memory DIMM

    28P1850 32 MB Memory DIMM

    28P1851 64 MB Memory DIMM

    28P1852 128 MB Memory DIMM

    28P1853 2 MB Flash DIMM

    28P1854 4 MB Flash DIMM

    28P1855 8 MB Flash DIMM

    28P1856 16 MB Flash DIMM

    28P1858 5+GB ISP Hard Disk w/Adapter

    28P1862 Optra Forms** Software

    28P1863 Optra Forms** Director Software

    28P1864 Optra Forms** 2MB Flash DIMM

    (No Longer Available as of May 6, 2005)

    28P1865 Optra Forms** 4MB Flash DIMM

    28P1866 Optra Forms** 8MB Flash DIMM

    28P1867 Optra Forms** 16MB Flash DIMM

    28P1868 Optra Forms** Hard Disk/Adapter

    28P1871 10 ft. Parallel Cable

    28P1872 20 ft. Parallel Cable

    28P1873 Parallel 1284 A-C Cable 3 m.

    28P1874 50 ft. Serial Cable

    28P1875 2-meter USB Cable

    28P2491 Print cartridge(2)

    28P2492 High Yield Print cartridge(2)

    28P2493 Use & Return Print cartridge(2)

    28P2494 Use & Return High Yield Print cartridge(2)

    28P2495 Usage Kit (Low Volt)(2)

    28P2496 Usage Kit (High Volt)(2)

    Note: (2) Supplies item.

    Printer Features

    All printer features are customer installable.

    Input, Output, and Other Media Features

    The ST9120 media features include:

    (#4505) 250-Sheet Drawer

    Minimum required = 0, maximum allowed = 4 for ST9120

    Prerequisite = none, Corequisite = none

    This input option can be installed beneath the printer to offer an added input source which holds approximately 250 sheets of 20 lb. paper. For capacity estimates on other media types, see Media Support. Multiple optional drawers are supported simultaneously.

    (#4506) 500-Sheet Drawer

    Minimum required = 0, maximum allowed = 4 for ST9120

    Prerequisite = none, Corequisite = none

    This optional input source installs beneath the printer, and it holds approximately 500 sheets of (20 lb.) paper. Multiple optional drawers are supported simultaneously.

    (#4520) 2,000-Sheet Drawer for Letter

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    This optional input source is designed to be installed beneath the printer and below any other optional input sources. This option holds approximately 2000 sheets of (20 lb.) paper.

    (#4521) 2,000-Sheet Drawer for A4

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    This optional input source is designed to be installed beneath the printer and below any other optional input sources. This option holds approximately 2000 sheets of (20 lb.) paper.

    (#4501) 250-Sheet Tray

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Corequisite = none

    For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. (Drawer includes tray plus support unit.) For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 200 sheets of (20 lb.) paper.

    (#4502) 500-Sheet Tray

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Corequisite = none

    For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. (Drawer includes tray plus support unit.) For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 500 sheets of (20 lb.) paper.

    (#4401) 250-Sheet Duplex Unit

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    Conflict = This feature cannot be installed on the duplex or network duplex models.

    This option offers two-sided printing capability. It is designed to complement the ST9120 printers with an integrated 250-sheet input. This feature is only available on the ST9120.

    (#4403) 250-Sheet Duplex Unit

    This option offers two-sided printing capability. It is designed to complement the ST9120 printers with an integrated 250-sheet input. This feature is only available on the ST9120.

    Minimum required = 0

    Maximum allowed = 1

    Prerequisite = None

    Co-requisite = None

    (#4511) Envelope Feeder

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    Although occasional envelope printing is supported through the printer's auxiliary tray, this option is available for more frequent envelope printing. It holds up to 85 envelopes. When the envelope feeder is installed, the auxiliary tray is not usable.

    (#4504) 250-sheet Universally Adjustable Tray (UAT)

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Corequisite = none

    This tray supports a range of narrow media not supported by the standard ST9120 paper tray. The UAT enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section.

    The minimum size supported in the 250-sheet UAT is 3x5 inches. The UAT is sold as a drawer or as a tray. The tray can be used in place of the 250-sheet integrated tray in the appropriate base printer.

    (#4504) 400-sheet Universally Adjustable Tray (UAT)

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Corequisite = none

    This tray supports a range of narrow media not supported by the standard ST9120 paper tray. The UAT enables the customer to feed from a tray quantities of custom-size media that range in 1mm increments from the media sizes outlined in the Media Sizes, Types, and Weights Section.

    The minimum size supported in the 400-UAT is 3x7 inches. The UAT is sold as a drawer or as a tray. The tray can be used in place of the 500-sheet integrated tray in the appropriate base printer.

    The range of media weights, types and sizes supported by each of these options is described under Media Support. The maximum configuration of paper options supported by each printer model is also described within Media Support.

    (#4560) Color 1220 Finisher S

    Minimum required = 0, maximum allowed = 1

    Prerequisite = Infoprint Color 1220 printer model N01, N02 with three additional 500-sheet drawers (Infoprint Color 1220 #4505) and Duplex Unit (Infoprint Color 1220 #4402), Co-requisite = Color 1220

    Printer Stand (#4565)

    Conflict = This feature is mutually exclusive with the Color 1220 Scanner Shelf (#4570)

    This feature is a finisher that offers stapling, hole punch, offsetting, and an additional output bin for the Infoprint Color 1220 with M30 MFP Option. Two, three, or four hole left-edge hole punching is available (configured from the printer Op panel during setup). Hole punching is not supported by IPDS.

    The Finisher S has a built-in scanner shelf for the M30 option.

    The Finisher S supports a single staple position is the upper left corner. The Finisher can support up to 3000 sheets of unstapled, unpunched media. For stapled media, the output bin supports up to 90 stapled sets or 2700 sheets. The stapler can staple a maximum of 30 sheets per set. The staple cartridge contains 3000 staples. Refill staple cartridges are available in packages of three cartridges.

    Printer Stands

    (#4534) T Printer Stand Feature

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Co-requisite = none

    The standard printer stand (without cabinet) is a solution for an office environment where the user desires a printer at approximately table height. It is solid grey in color.

    (#4535) T Low-Profile Printer Stand Feature

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Co-requisite = none

    The low-profile printer stand is targeted for an office environment where:

    The printer is usually accessed by a user who is sitting down (for example directly behind a desk), or

    Reduced access height to the printer and output options is desired, or

    It's required to meet ADA needs.

    It is solid grey in color.

    (#4533) T Printer Stand with Cabinet Feature

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Co-requisite = none

    The standard printer stand with cabinet is targeted for an environment where:

    the user desires the printer to reside approximately at table height, or

    An increased height is desired for input option access, or

    A storage bin is desired.

    It is solid grey in color.

    Printer Stand Recommendations

    To minimize the possibility of tipping when the printer is configured with three or more paper drawers, the use of a printer stand is recommended.

    Under no circumstances should the bottom of the base printer or the bottom of the duplex unit, if installed, be higher than 38.1 mm (1.5 in.) above the printer stand side shelves.

    The following table shows the recommended limit for input and output options to use with each respective printer stand.

    Maximum Recommended Configurations:

    Low Profile Printer Stand

    Stand with Cabinet Printer Stand

    -------------- --------------- --------------- -------------

    Input Options: Any 4 250/500 Any 4 250/500 Any 4 250/500

    sheet drawers sheet drawers sheet drawers

    OR OR OR

    2000-sheet drwr 2000-sheet drwr 2000-sheet drwr

    plus 1 250/500 plus 1 250/500 plus 3 250/500

    sheet drawers sheet drawers sheet drawers

    Output Options: Full Support Full Support Full Support

    Printer Stand Dimensions

    Width Depth Height Weight (1)

    ------------ ------------ ----------- ------------

    Low Profile Stand 772mm(30.4"] 594mm(23.2"] 584mm(23.0"] 24.6Kg(54lb)

    Printer Stand 772mm(30.4"] 594mm(23.2"] 808mm(31.8"] 34.1Kg(75lb)

    with Cabinet

    Printer Stand 772mm(30.4"] 594mm(23.2"] 808mm(31.8"] 30.9Kg(68lb)

    (#4546) Scanner Stand with Cabinet Feature

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Co-requisite = none

    This feature is solid grey in color and provides a stand for the scanner included in the M20, M25, and M30 MFP Options.

    Memory and Flash Memory Features

    The ST9120 has two slots for memory and flash features. Only one flash feature is allowed. If more than one flash feature is installed, the feature with the largest capacity is used. If a flash feature and an Optra Forms flash feature are both installed, the Optra Forms flash feature is used.

    The memory features for the ST9120 include the following SDRAM features:

    (#4304) 4 MB Memory DIMM

    Minimum required = 0, maximum allowed = 3

    Prerequisite = none, Corequisite = none

    (#4308) 8 MB Memory DIMM

    Minimum required = 0, maximum allowed = 3

    Prerequisite = none, Corequisite = none

    (#4316) 16 MB Memory DIMM

    Minimum required = 0, maximum allowed = 3

    Prerequisite = none, Corequisite = none

    (#4332) 32 MB Memory DIMM

    Minimum required = 0, maximum allowed = 3

    Prerequisite = none, Corequisite = none

    (#4364) 64 MB Memory DIMM

    Minimum required = 0, maximum allowed = 3

    Prerequisite = none, Corequisite = none

    (#4390) 128 MB Memory DIMM

    Minimum required = 0, maximum allowed = 3

    Prerequisite = none, Corequisite = none

    The flash memory features for the ST9120 include:

    (#4030) 2 MB Flash DIMM

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    (#4032) 4 MB Flash DIMM

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    (#4034) 8 MB Flash DIMM

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    (#4036) 16 MB Flash DIMM

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    If larger storage is required, an optional hard disk feature is also available. The hard disk with adapter feature is required for a hard disk support. The adapter plugs into one of the 2 connection slots. Multiple hard disk features may be ordered although only one hard disk can be installed at a time.

    (#4329) 5+ GB Hard Disk with Adapter

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    Local Connections

    Internal Local Connection Features

    In addition to the standard USB port for all models and standard parallel port on the non-network models, each ST9120 model has one expansion slots that can be used for an optional hard disk, optional internal print servers, or optional local connections.

    The following local connection options are supported:

    (#4130) Tri-Port Adapter

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    The Tri-Port Adapter supports three interfaces:

    RS-232/RS-422 Serial

    This serial port utilizes a standard 25-pin D-shell female connector at speeds up to 115,200 bps. It can be connected to most systems that support an RS-232C or RS-422 interface. Serial baud rates range from 1200 to 115,200 bps.

    Apple Macintosh or LocalTalk

    This port utilizes a standard 8-pin LocalTalk port for direct connection to an Apple Macintosh or LocalTalk network.

    Infrared

    The Infrared adapter (FC 4131) is required to use this port. The infrared adapter plugs into this port and provides a wireless I/R connection at up to 4 megabit per second (mbps).

    Note: This interface is not supported on the ST9120.

    (#4135) Parallel 1284 C-B Adapter

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Corequisite = none

    This adapter allows an RS-232C Serial/Parallel port with a type C connector (1284-C) to accept a cable with a type B connector (1284-B).

    (#4136) Parallel Card and 1284-C Cable

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    This feature includes both the RS-232C Serial/Parallel 1284-C Interface Card and a Parallel 1284-C 6-foot cable.

    (#4137) Parallel Card and C-B Adapter

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    This feature includes both the Parallel 1284 C-B Adapter (FC 4135) and the RS-232C Serial/Parallel

    1284-C Interface Card (FC 4133).

    Infrared Adapter

    Minimum required = 0, maximum allowed = 1

    Prerequisite = Tri-Port Adapter (FC 4133), Corequisite = none

    The Infrared adapter plugs into the Tri-Port adapter and provides a wireless interface for devices such as laptop computers and handheld computers and pocket PCs. Its transfer rates are up to 4 mbps.

    (#4133) Parallel/USB Interface Card

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    This card provides a USB port and 1284-C parallel port. The USB interface offers data transfer rates of 12 mbps.

    Note: USB is supported only under Windows 98, Windows Me, Windows 2000 operating systems, Sun's Sun Ray appliances running Sun Ray Server code version 1.2 or later, Sun Blade workstations, Windows Me, and Apple Macintosh i Mac computer with operating system 8.6 or higher. A USB cable is included with this card.

    External Serial Adapter

    Minimum required = 0, maximum allowed = 1

    Prerequisite = base printer model (001/002) or Parallel/USB Interface card (FC 4133), Corequisite = none

    This adapter is installed on the printer's parallel port and receives its power through the parallel port. It utilizes a standard 25-pin D-shell females connector and supports baud rates up to 19,200 bps for RS-232C or 38,400 bps for RS-422.

    Cable Features

    (#4182) Parallel 1284-C Cable 3-meters

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Corequisite = none

    For personal Computers and UNIX Workstations, the recommended PC parallel printer cable is required for attachment of the ST9120. It must be ordered separately.

    (#4180) 10 Ft. Parallel Cable

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Corequisite = none

    For parallel attachment, this cable is recommended for ten feet or less and must be ordered separately.

    (#4181) 20 Ft. Parallel Cable

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Corequisite = none

    For parallel attachment, this cable is recommended for twenty feet or less and must be ordered separately.

    (#4183) 50 Ft. Serial Cable

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Corequisite = none

    For serial attachment, this cable is recommended for fifty feet or less and must be ordered separately.

    (#4184) 2-meter USB Cable

    Minimum required = 0, maximum allowed = no maximum

    Prerequisite = none, Corequisite = none

    For USB attachment, this USB cable is recommended and must be ordered separately.

    IBM Application System/400

    For serial attachment to the IBM AS/400 ASCII Workstation Controller, refer to the IBM AS/400 ASCII Workstation Reference and Example manual (SA41-9922) for specific cable information. The printer requires a Tri-Port adapter.

    Network Connection Features

    Network cards plug into two expansion slots for 1125 and one expansion slot for 1120.

    For ST9120 there is one expansion slot for network For Infoprint 1125 there are two expansion slots for network cards to plug in. On models that have Ethernet standard (network and duplex network models), the Ethernet is onboard and does not take up an expansion slot. Only one Ethernet card and one Token-Ring card are allowed. Models that have Ethernet onboard cannot have a 10/100BaseTX card installed in an expansion slot. These models can have a 10Base/2 card installed in an expansion slot, but it will disable the onboard 10/100BaseTX Ethernet.

    (#4168) Fiber SC Card

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    This print server allows the printer to connect a 100BaseFX fiber optic Ethernet network. This card supports multimode fiber (62.5/125um) and has a duplex SC connector.

    (#4169) Fiber MTRJ Card

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    This print server allows the printer to connect a 100BaseFX fiber optic Ethernet network. This card supports multimode fiber (62.5/125um) and has a female MTRJ connector.

    Network Cards for Internal Print Server Features

    Infoprint 1120 network models come standard with Fast Ethernet 10/100BaseTx built-in to the controller board. Additionally, ST9120 supports the following MarkNet** N2000 Series Internal Print Servers:

    (#4170) 802.11b Adapter

    Minimum required: 0

    Maximum allowed: 1

    Prerequisite: Network model or Ethernet feature

    Co-requisite: None

    This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11b wireless standard. This standard operates at speeds of up to 11 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building contruction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device.

    The feature is an external adapter that connects to the ethernet port on the printer. The ethernet port can be the standard port that comes on any network model, or an internal ethernet or external print server port. This feature includes a cable that plus into the Ethernet port.

    (#4120) Token Ring attachment

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    (#4162) Ethernet 10BaseT/100BaseTX

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    (#4161) Ethernet 10BaseT/2

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    Network Cards for External Print Servers Features

    These external Print Server features allow the printer to be connected to a network using the printer's parallel or serial port. These features are in addition to any internal print server features.

    (#4163) Ethernet 10BaseT/100BaseTX-1 port

    Minimum required = 0, maximum allowed = 1

    Prerequisite = Base printer model or parallel/USB Interface Card feature (FC 4133), Corequisite = None

    This external print server has one parallel port to connect to a Ethernet 10BaseT/100BaseTX network.

    (#4165) Ethernet 10/100BaseTX/10Base2-1 port

    Minimum required = 0, maximum allowed = 1

    Prerequisite = Base printer model or parallel/USB Interface Card feature (FC 4133), Corequisite = None

    This external print server has one parallel port to connect to a Ethernet 10BaseT/100BaseTX or 10Base2 network.

    (#4164) Ethernet 10BaseT/100BaseTX-3 port

    (No Longer Available as of January 20, 2006)

    Minimum required = 0, maximum allowed = 1

    Prerequisite = Base printer model or parallel/USB Interface Card feature (FC 4133) or Tri-Port Adapter feature (FC 4130) or External Serial Adapter feature (FC 4132), Corequisite = None

    This external print server has two parallel ports and one serial port to connect up to three printers to a Ethernet 10BaseT/100BaseTX network.

    (#4121) Token Ring-3 port

    Minimum required = 0, maximum allowed = 1

    Prerequisite = Base printer model or parallel/USB Interface Card feature (FC 4133) or Tri-Port Adapter feature (FC 4130) or External Serial Adapter feature (FC 4132), Corequisite = None

    This external print server has two parallel ports and one serial port to connect up to three printers to a Token Ring network.

    MarkNet** Compatibility

    The MarkNet N2000 Series also supports and works in ST9120 printers.

    The MarkNet N2000 Series and MarkNet X2000 Series support Network Plug and Print 2.0 on Windows NT 4.0 and Windows 2000 systems.

    The Ethernet and Token-Ring print servers and standard Ethernet connections support the following protocols:

    TCP/IP

    Novell (IPX/SPX including NetWare Directory Services)

    AppleTalk**

    LexLink** (DLC/LLC)

    The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:

    IPP: Internet Printing Protocol

    SLP: Service Location Protocol

    NTP: Network Timing Protocol

    The printer with standard Ethernet MarkNet N2000 Series internal print servers and the MarkNet X2000 Series external print servers support a Resident Web page with Microsoft Internet Explorer 4.0 or later and Netscape Navigator 4.5 or later for Windows 95/98, Windows Me, Windows 2000 or none, Corequisite Windows NT.

    The remote operator panel is available from MarkNet N2000 internal print servers or MarkNet X2000 external print servers.

    IBM Host Connection Features

    (#4823) Decryption Card

    Minimum required = 0, maximum allowed = 1

    Prerequisite = ST9120, 1125, 1130, 1140, 1145, 1226, 1332, 1352, 1372 printer with a standard network connection (n or dn models). Infoprint 1120 must have 32 MB of memory.

    Co-requisite = none

    Conflict = the decryption feature plugs into the firmware slot in the printer and is mutually exclusive with the application solution features including Card for IPDS and SCS/TNe (FC 4820), Bar Code (FC 4870) and ImageQuick Card (FC 4821). This feature cannot be installed on any of the "in" models.

    Encryption Overview

    This feature offers an encryption solution for print output on hosts such as a mainframe, UNIX server, Microsoft Windows PC or Apple workstation that connect over a TCP/IP network to the IBM workgroup printer. The decryption card is installed in the printer and decryption takes place at the printer for maximum security.

    This decryption solution is based on Federal Information Processing Standard (FIPS-197) for the Advanced Encryption Standard (AES). This standard specifies Rijndael as the encryption algorithm. AES is the new encryption standard that replaces DES, the old standard. AES is a symmetric algorithm supporting key lengths of 128, 192, and 256 bits for encryption. A symmetric algorithm uses a single key for both encryption and decryption. A key length of 256 bits provides 1.1 times 10 to the power of 77 possible combinations which makes it extremely difficult for eavsdroppers to decrypt intercepted print jobs.

    The decryption feature also supports sessions keys. Session keys are used during a specific host session with the printer. The key is different for every session providing maximum security. Most competitive decryption solutions don't support session keys.

    Connectivity Requirements for Decryption Feature

    The printer must be connected to an ethernet network using TCP/IP. This feature only work on printer models with a standard ethernet port. It will not work with any of the optional ethernet print server features. The decryption card plugs into the firmware slot in the printer and is mutually exclusive with the application solution features such as IPDS, Bar Code, and ImageQuick.

    Unique TCP/IP port numbers are used for encrypted print jobs. The decryption card decrypts and prints information appropriate for the port.

    This feature is supported on the following IBM drivers:

    Sun Solaris 7, 8, 9

    HP-UX 11

    IBM AIX 4.3, 5.0

    Linux (Re Hat, Caldera, SuSE, TurboLinux)

    Windows 98/Me/NT4.0/2000/XP

    Mac OS X

    AS/400

    IBM Application System/400 (with Operating System/400 (Version 3 Release 1 or later utilizing OS/400 Host Print Transform. Use Manufacturer Type and Model (MFRTYPMDL) of LEXOPTRAT** (in OS/400 Version 4 Release 2 or later), LEXOPTRAS**, or LEXOPTRA**.

    (#4141) Coax/Twinax Adapter for SCS

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    This card plugs into the expansion slots. Notes on the Coax/Twinax Adapter for SCS are below:

    Coax/Twinax Adapter for SCS is FCC class A only

    When the printer is emulating an IBM printer, the function supported depends on the IBM host software.

    The SCS adapter uses PCL(?fonts from the printer for IBM host fonts. The default resolution of the printer determines the resolution of the SCS data and its PCL fonts.

    For Direct Twinaxial Attachment

    Hardware Compatibility

    When the printer contains the optional Coax/Twinax Adapter for SCS with a twinaxial cable, the printer attaches to the following IBM hardware:

    AS/400e servers and e-systems

    AS/400 Twinaxial Workstation Controllers

    AS/400 Advanced System/36 Twinaxial Workstation Controller

    5494 Remote Control Unit

    5394 Remote Control Unit

    Software Compatibility

    The IBM host software requirements for SCS printing when the printer is emulating an IBM 3812 Model 1, 5219 D01/D02, 4214-02, 5225-01, 5224-01 or 5256-03 printer are as follows:

    AS/400 OS/400 (All releases)

    AS/400 OS/400 V3R6 with System Support Program (SSP) Release 7.5 or later

    AS/400 SSP Release 7.1 or later

    For Direct Coaxial Attachment

    Hardware Compatibility

    When the printer contains the optional Coax/Twinax Adapter for SCS with a coaxial cable, the printer attaches to the following IBM hardware:

    IBM 3174 Control Unit

    ES/9000 Work Station Subsystem Controller

    3174 compatible control units

    Software Compatibility

    The IBM host software requirements for DSC/DSE or SCS printing when the printer is emulating an IBM 3812-01, 4224-01, 3287, 3268 or 4214 printer are as follows:

    Any application or host software that generates the SCS or DSC/DSE data streams for one of the emulated printers such as:

    VTAM Printer Support (VPS - Levi, Ray & Shoup (LRS) software)

    JES/328X Print Facility V2R2 or later

    Graphical Data Display Manager (GDDM) V2.3

    RSCS V3.2 or later

    VTAM

    DisplayWrite/370 V1R2.1 or V2R1 or later (MVS/CICS or VSE/CICS)

    The SCS data stream is supported by IBM MVS/CICS and VSE/CICS.

    Applications Solution Features

    These features plug into the firmware card slot on the controller board. There is only one slot for either Bar Code card or ImageQuick card or card for IPDS & SCS/TNe (see IBM Environment Solution features).

    (#4870) Bar Code Card Feature

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    The Bar Code Option Card enables the ST9120 laser printers to print a wide variety (over 47) of the most popular industry standard bar codes. The Bar Code card primarily generates bar codes algorithmically. The Bar Code Option Card emulates HP printers with an HP Barcodes&More Cartridge/ SIMM/DIMM or a JetCAPS (BarSIMM(/BarDIMM( (v.2.0b) installed for compatibility with existing bar code applications using HP/JetCAPS solutions.

    (#4821) ImageQuick** Card Feature

    (For IBM US, No Longer Available as of February 20, 2004)

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    The ImageQuick Option Card enables the ST9120 laser printers to print PDF files, TIFF, GIF, JPEG, PNG, BMP, PCX, DCX, HTML files or URLs referencing PDF or HTML files directly to the printer quickly and easily without using a driver. The Drag'N'Print Utility is included and can be used to create URL bookmarks or to print these objects directly.

    (#4822) Card for PRESCRIBE*

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    The card for PRESCRIBE interprets the PRESCRIBE data stream designed for Kyocera PRESCRIBE printers and converts it into PCL. The Infoprint 1120/1125 with a card for PRESCRIBE can replace Kyocera Page Printers such as Kyocera FS-600, FS-800, FS-1500, FS-1550, FS-1600, FS-1700, FS-1700+, FS-3700, FS-6700, FS-7000.

    Optra Forms Features

    (#4871) Optra Forms Software Feature

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = Optra Forms flash or Hard Disk

    Optra Forms uses 'up-to-the-minute' data directly from customer applications and combines it with printer resident electronic forms with text and graphics to produce (print) completed forms such as invoices, statements, pick slips, labels, purchase orders or confirmations with bar codes or other specialized graphics on a variety of paper types. For Optra Forms:

    For Optra Forms:

    No Server-based or host based merge program or software is required.

    Use with virtually any ASCII text print file from any platform, mainframe, AS/400, UNIX or workstation, over Coax, Twinax, parallel, serial or LAN (TCP/IP).

    Generally, make no changes to database applications.

    Print different forms at different locations from the same database, possibly using the same data.

    Update forms quickly and easily (globally) over the LAN

    Provides support for bar codes, color, duplex, multipage form sets and more.

    Store forms as efficient, compact forms in flash.

    Optra Forms is supported by the ST9120 printers using the Optra Forms 2, 4, 8 and 16MB Flash DIMMs or Optra Forms Hard Disk.

    (#4872) Optra Forms Director Feature

    Minimum required = 0, maximum allowed = 1

    Prerequisite = Optra Forms Software (FC 4871), Corequisite = none

    Optra Forms Director is a Windows NT or Windows 2000 server-based program. Using o additional host software (AS/400, UNIX or Mainframe), the host application sends a print spool file to a Windows NT or 2000 print queue. Optra Forms Director service automatically parses the print spool file into single or multiple print jobs using Microsoft Visual Basic Script or JScript methods and Named Pipes.

    The spool file which may contain many individual documents is customized by separating it into individual jobs or by adding data or particular commands to the individual documents that are then sent to IP, LPR, or Windows printer destinations. The additional data or commands may be to staple, separate documents with a cover page, copy and collate, print on both sides, offset stack, fax, or hole punch each individual job. Print jobs are customized and distributed electronically to network printers automatically without making any changes to host applications.

    Optra Forms is supported on the ST9120 using a Optra Forms flash or Hard Disk. Only one Optra Forms flash DIMM is supported. If a Flash DIMM and Optra Forms Flash DIMM are both installed, the Optra Forms DIMM will be used.

    (#4873) Optra Forms 2 MB Flash DIMM

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = Optra Forms Software

    (#4874) Optra Forms 4 MB Flash DIMM

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = Optra Forms Software

    (#4875) Optra Forms 8 MB Flash DIMM

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = Optra Forms Software

    (#4876) Optra Forms 16 MB Flash DIMM

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = Optra Forms Software

    (#4877) Optra Forms 5+ GB Hard Disk with Adapter

    (No Longer Available as of June 25, 2004)

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = Optra Forms Software

    IBM Environment Solution Features

    (#4820) Card for IPDS and SCS/TNe Feature

    Minimum required = 0, maximum allowed = 1

    Prerequisite = none, Corequisite = none

    The Card for IPDS and SCS/TNe provides AFP/IPDS and SCS (LU1) data stream support for IBM mainframe and AS/400 computers. The Card for IPDS and SCS/TNe allows customers to print AFP/IPDS or SCS(LU1) documents over TCP/IP to LAN printers or over distributed SNA networks using the Coax/Twinax Adapter for SCS with a coaxial or twinaxial cable connected printer. Detailed information on this feature is provided below. This feature is installed in the optional firmware slot.

    (#4878) Optra Forms 2-Key Security

    Minimum required = 0, maximum allowed = 1

    Prerequisite = Serial Port & Optra Forms SW, Corequisite = none

    For added security, confidential forms printing can be restricted to to authorized personnel using the security features. This is a lock and key that attaches to the printer serial port. When the key is removed, the printer will still print but confidential forms will not. This feature is mutually exclusive with the 3-key security feature (FC 4879).

    (#4879) Optra Forms 3-Key Security

    Minimum required = 0, maximum allowed = 1

    Prerequisite = Serial Port & Optra Forms SW, Corequisite = none

    For added security, confidential forms printing can be restricted to to authorized personnel using the security features. This is a lock and key that attaches to the printer serial port. When the key is removed, the printer will still print but confidential forms will not. This feature is mutually exclusive with the 2-key security feature (FC 4878).

    (#4880) Optra Forms Manager

    Minimum required = 0, maximum allowed = 1

    Prerequisite = Optra Forms Flash (FCs 4873, (except for 4920 and 4928 printers) 4874, 4875, 4876) or Optra Forms Hard Disk w/Adapter (FC 4877), Corequisite = none

    Optra Forms Manager enables administrators to manage and distribute forms to multiple printers over a TCP/IP network. This includes loading new forms and updating existing forms on an Optra Forms printer over a TCP/IP network.

    Optra Forms Manager lets you:

    Keep a master copy of all forms on a PC

    Update all printers at same time over TCP/IP after a printer query for its resident Styles and creation dates. Only matching Styles (flash files) with different creation dates are downloaded to the printer over TCP/IP.

    Import a printer IP address txt file (also from MarkVision** registry)

    Select the printers to which the Download or Update operations apply.

    Run the update as a batch job

    Create a log file to know successful printer updates

    Create a Style report and save it to a comma separated variable (CSV) file giving better knowledge about the forms in all the printer. The Style report includes the printer listed by their IP address or DNS name and a description, Style names and their versions and the Optra Forms Merge program version in each printer.

    Create PDF files (using Acrobat Distiller) of the data merged with forms after retrieving archive data files from the Optra Forms hard disk. The PDF file can be saved as a softcopy archive file.

    Note: With an Optra Forms hard disk, create a job buffering partition or change its size. After the disk is formatted and partitioned, the Optra Forms Merge program is written to the disk.

    To use Optra Forms Manager, the Optra Forms printers must be connected to a TCP/IP network. The LPR protocol is also supported to download forms.

    Optra Forms Manager is now available on a separate CD for those customers who want to use this program to more effectively manage their Optra Forms printers over TCP/IP. Other third party service providers can also manage their customers forms more cost effectively.

    (R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

    ** Company, product, or service name may be a trademark or service mark of others.

    Windows is a trademark of Microsoft Corporation.

    UNIX is a registered trademark in the United States and other countries license