Honeywell PRN-6 Printer (Autopulse, Notifier, Firelite, Gamewell)
PRN6 435469 (New)
Fully refurbished with 90-day warranty
044829 (6-pack) Compatible (New)
IFP-NET-3 Graphic Monitoring Software
The PRN-6 printer can be used with AUTOPULSE IQ-318 and IQ-636X-2 Control Panels, and with AUTOPULSE 542R and 542D Releasing Panels to provide a written record of system events and status changes.
The IFPN-PRN6 is an optional dot matrix printer for use with the IFP-NET-3 system. The IFPN-PRN6 can be attached to an IFP-NET-3 workstation to print system events, text of linked files, and history logs.
• Provides a hard copy printout of all system events and status changes.
• Time stamps printed on the record of each event and status change with the current time-of-day and date.
• Uses standard 9 in. x 11 in. (229 mm x 279 mm) tractor-feed fan-fold paper.
• Provides 80 columns of data at 10 characters per inch.
• Provides printed records of system configuration and addressable device parameters.
• Nine-pin print head.
• Very quiet (approximately 53 dBA).
Printed transaction records reduce the man-hours required to install and maintain a system. A printed record of all system events (alarms, troubles, etc.) and status changes can be especially valuable in the event of a disputed incident.
Construction and Operation
The printer is housed in its own separate enclosure and is suitable for placement on a desk top, counter, or table.
The PRN-6 should be placed in a secure area to prevent theft of the printer and/or printed records.
The PRN-6 must not be located further than 50 ft (15.2 m) (actual cable length) from the control panel.
Consult the control panel installation manual for the proper method and PINs used to complete the electrical connection to the control panel.
Note: If printer operation is required during failure of primary power, use of a separate UL-listed Uninterruptable Power Supply (UPS) system is recommended.
Printer Method: Serial printing with 9-pin matrix print head
Printing Speed: (copy draft) 310 cps at 10 cpi
Character Density: 10 cpi standard (12, 15, 17.1, and 20 cpi available via front panel)
Graphic Resolution: (VxH) 144 x 240 dpi
Ribbon Life (approx.): 4 million characters (DPQ)
Acoustic Noise Level: 53 dBA (approx.)
Dimensions: 19 in. (483 mm) W x 7.9 in. (201 mm) H x 9.7 in. (246 mm) D
Weight: 17.6 lb (7.9 kg)
Power Supply: 120 VAC (only)
Power Consumption: 50 watts (operating)
Operating Environment Temperature: 50 °F to 104 °F (10 °C to 40 °C)
Operating Environment Humidity: 20% to 80% (non-condensing)
Part No. Description lb (kg)
435469 PRN-6 Printer 18 (8.2)