AMT Datasouth ACCEL-5350 Series

 
 
 
 


Accel5350
AMT ACCEL-5350 Series
AMT 535 5350 6350 635 844110-001 Black Printer Ribbon Cartridge
New
844110-001 Increments of 6 please (New)
$28.00



SaleAMT ACCEL-5350 F&I Dot Matrix Multiform Impact Printer (R&R)
Fully refurbished with 90-day warranty
ACCEL-5350 With Reynolds
$1320.00 $1199.00



AMT 305020 535 5350 635 6350 Printhead
Fully refurbished with 90-day warranty
305020 830135 380304 830119 SP-510 Advanced Exchange
$265.00


Our AMT ACCEL-5350 printers are the most versatile and heavy-duty forms printers available! How can we make such a claim? Because no other printers are built as sturdy, impact with such force, or make better impressions on tough multipart forms.

From their all-metal chassis to their rugged 24-pin dot-matrix printheads, 5350s are built for reliable, heavy-duty printing on just about any kind of paper, form, label or envelope. There's a drop slot for single sheets, a bi-directional tractor for pin-fed forms, and a variety of paper handling options to fully automate your printing operation.

5350s offer a wide 17" paper path, print speeds up to 480 cps, four fonts, five emulations, snap-in ribbon cartridges, color printing, and our patented Select-dial for easy setup and configuration. (The print speed of certain international models may vary.)

535SiLook for a super-impact printhead in our ACCEL-5350si that can print through 12-part forms, with or without carbons. Exerting over 30,000 lbs. of force per square inch, the 5350si ensures that the last page of your multipart form will be easy to read.

Or, our ACCEL-5350d offers a powered bottom-feed forms tractor that provides a convenient straight-through paper path and the ability to tear off a printed form without wasting the next form. You get three paper paths in all--two tractor-fed paths and the cut-sheet path--that you can useAccel 5350B N Shadowinterchangeably without reloading paper. Forms handling has never been easier.

Finally, our ACCEL-5350dsi is like three printers in one. You get all the features of the 5350 plus the super-impact printhead of the 5350si and the powered bottom-feed forms tractor of the 5350d. If you're serious about multipart forms printing, this is the BEST solution!

Every AMT ACCEL-5350 printer comes with a one-year limited warranty that includes parts and labor. For dependable printing on the toughest multipart forms, choose AMT ACCEL-5350 series printers.

ACCEL-5350 Printer Series
AMT5350ACCEL-5350
AMT5350si ACCEL-5350si with super-impact printhead for printing on 12-part forms

AMT5350d ACCEL-5350d with motorized bottom-feed tractor
AMT5350dsiACCEL-5350dsi with super-impact printhead & motorized bottom-feed tractor

Dimensions
5350 & 5350si
Height8.5 inches (21.6 cm)
Width24 inches (61 cm)
Depth19 inches (48.3 cm)
Weight48 pounds (21.8 kg)
5350d & 5350dsi
Height12 inches (30.5 cm)
Width24 inches (61 cm)
Depth19 inches (48.3 cm)
Weight57 pounds (25.9 kg)
Text
Printing method24-pin impact dot-matrix with half-dot microshift
Print directionBi-directional, logic-seeking
Print speeds
Letter80 cps as 10 cpi
Memo200 cps at 10 cpi
Draft480 cps at 12 cpi (print speed of certain international models may vary)
FontsCourier, Gothic, Trend, Elite
Pitches5, 6, 6.6, 7.5, 8.5, 10, 12, 13.3, 15, 17.1 and 20 cpi
Character set256-character IBM standard with international and graphic characters
LanguagesEnglish, French, German, Danish, Swedish, Italian, Spanish, Japanese, Norwegian, and Portuguese
Line spacing3, 4, 6, 8 and 12 lines per inch
Max. line length16 inches (160 characters at 10 cpi; 320 at 20 cpi)
AttributesUnderscore, bold, shadow, italic, double-high, double-wide, center and justify
ColorsBlack, blue, red, yellow, green, orange and purple
OptionsMany fixed-pitched and proportional fonts
Graphics
Dots per inchUp to 240 V x 360 H
Dot diameter0.3 millimeters
Dots per columnUp to 16
Image WidthUp to 16 inches
ColorsAll supported by software
Paper & Forms
Feed methodsFriction for cut sheets; tractor for pin-feed forms
Paper paths
5350 & 5350siTop and rear; bottom with bottom-feed tractor option
5350d & 5350dsiTop, rear and bottom
WidthUp to 17 inches
LengthsAny length over 3 inches
Sheet thicknessUp to 0.015 inch thick
Form thickness
5350 & 5350dUp to 7 parts plus carbons (up to 0.024 inch thick)
5350si & 5350dsiUp to 12 parts plus carbons (up to 0.040 inch thick)
Slew rate8 and 6 inches per second
Special featuresTear bar, first-line printing, auto bail, paper out and paper jam sensing, forms-on-demand, and paper park
OptionsBottom-feed tractors & more
Ribbons
TypeContinuous loop, inked nylon fabric in plastic cartridge
MonochromeBlack
ColorProcess colors (CYMK)
Length16 meters
Life5 million chars. monochrome, 2 million characters for color
Memory & Intelli-Card
Input buffer32 kilobytes, expandable
User save areasFive
Intelli-cardOne
Emulations & Configurations
StandardAMT, Diablo 630 ECS, Epson JX, Epson LQ-2550 (includes Epson LQ-1500 and LQ-2500, and IBM Proprinter XL24
OptionsDEC, Apple and HP printers and plotters
Interfaces
Parallel portCentronics-compatible; 36-pin female connector
Serial portEIA RS-232-C; DB-25 female connector
Baud rates150 to 38,400 baud
ParityEven, odd and none
HandshakingDTR, X-ON/X-OFF and ETX/ACK
Control Panel
Keypad12 buttons and patented Select-dial
Display16-position, alphanumeric liquid-crystal display
Setup menuOperator control of all printing features
Reliability & Certifications
MTTRLess than 15 minutes
MTBF20,000 hours @ 25% duty cycle
AgenciesUL & C-UL Listed, FCC Class B compliant, CE compliant, ENERGY STARTM compliant, others optional
Power & Environmental
Voltage90-130 and 180-260 vac (universal power supply)
Frequency47-63 Hz
Operating temp.7 to 46 C
Storage temp.-20 to 60 C
Humidity10 to 90%, noncondensing
Noise level55 dBA
Bar Code Option
SymbologiesInterleaved 2-of-5, Code 128, UPC-A, UPC-E, EAN-13, EAN-8, Code 3-of-9, Codabar, and POSTNETTM
CompatibilityGenicom- and OTC-compatible command set