Genicom 5050 & 5100 Shuttle Matrix Printer

 
 
 
 


5100Gr

GENICOM 5100 Line Printer
Fully refurbished with 90-day warranty
5100 Factory Refurbished



Works Fast. Works Hard.

Printing at up to 1000 lpm, the GENICOM 5050 and 5100 printers are designed for rock-solid reliability, even in the most demanding applications and environments.

Gives You Worry-Free Operation.
GENICOM's legendary rugged design means you don't have to worry about downtime - even in the harshest environments. Paper out, paper jams, and ribbon sensors allow you practically fail-safe and unattended printing. And the industry's only lifetime warranty on our shuttle mechanism and striker bar provides peace of mind. Low-cost consumables, user-replaceable print heads, and maintenance-free operation keep cost of ownership low.

Suits Your Needs.
Choose from a wide variety of models. All models come standard with IEEE 1284 parallel and RS232/422 interfaces as well as IGP/QMS graphics languages. Two additional I/O slots are present in each unit, where optional, easily installed Ethernet, Token Ring, and IBM twinax/coax connectivity solution cards may be added. These I/O slots provide for your current and future networking needs.

With hot port switching between all ports, flexible paper handling, and numerous choices in emulations, it's easy to find the right model for your application.

Protects Your Budget.
The 5050 and 5100 are among the first line printers to take advantage of GENICOM's newest Intelliprint controller architecture, which protects your investment by allowing fast, easy upgrades as your network connectivity requirements evolve. Pluggable I/O modules can be installed in a matter of minutes, and printer firmware flash ROM is updatable with each printer individually or via your network.

Compatibility with GENICOM's well-known 4000 Series line printers and compatibility with other industry printer emulations provide universal system plug and play.

Key Features

  • Industry's only lifetime warranty on shuttle mechanism and striker bar.
  • Simultaneous connections with auto interface switching.
  • Top demand exit or rear exit standard.
  • Industrial graphics, bar codes, and labels.
  • Easy to use control panel with logical menus.
  • Ribbon Life Monitor feature.
  • High Visibility Attention light.
  • True zero-tear models available (5100FS).
  • IGP/QMS included at no charge.

  • Printing Technology
    Line impact dot matrix

    Print Speeds

    5050 5100
    Draft (64 char) 500 lpm1000 lpm
    Draft (96 char)429 lpm857 lpm
    DP (64 char)375 lpm750 lpm
    DP (96 char) 300 lpm600 lpm
    Correspondence (64 char)200 lpm400 lpm
    Correspondence (96 char)158 lpm 316 lpm
    NLQ (64 char) 103 lpm207 lpm
    NLQ (96 char)81 lpm162 lpm

    Fonts and Character Sets

    Draft, data processing, correspondence, Gothic NLQ, Courier NLQ, Italic NLQ, OCR-A, OCR-B, PC graphics, Greek/Math symbols, country substitution 7-bit character sets, International ISO and MS 8-bit character sets, IBM EBCDIC character sets, and Euro character capability
    Printing
    Character Spacing:
  • 10, 12, 13.3, 16.7, 17.1, 20, plus user selectable
    Line Spacing:
  • 3, 4, 6, 8, plus user selectable
    Attributes:
  • Oversize, bold, underline, super/subscript, proportional, expanded, and download characters
    Print Control
  • EVFU (12 and 14 channels)
    Forms:
  • Form length to 22 inches
  • Store up to 10 user-defined forms
  • Auto perf skip-over feature
    Horizontal Tabs:
  • 22 positions
    Vertical Tabs:
  • Absolute or relative
    Ribbons
  • 50 and 75 million character cartridges with internal reinking
  • "Clean hands" installation (same ribbons as used on GENICOM 4800/4900 models)
    Cabinets
  • Front-enclosed pedestal (55 dBa)
  • Quietized cabinet (50 dBa)
  • Open pedestal (60 dBa)
    Paper Handling

    Widths:

  • 3 to 16.54 in. (7.6 to 42 cm)
    Print Line Length:
  • 13.2 in. (33.5 cm)
    Number of Copies:
  • Original plus 5; up to 120-lb cardstock/110 index (125 tag)
    Protocols & Emulations
  • ANSI X3.64 enhanced, IBM Proprinter III XL, Epson FX-286e, Epson ESC P/2, Printronix P Series, P300/600
    SCS only:
  • Coax: IBM Models 6408, 3287, 4234
  • Twinax: IBM Models 5225, 4234, 6408
    IPDS only:
  • Coax: 4234/6408, 3287
  • Twinax: 4234/6408, 5225

    Interfaces and Connectivity
    Standard:

  • IEEE 1284 parallel, RS232/422
    Optional I/O (2 slots):
  • Twinax/coax(one board per printer); choice of SCS or IPDS; coax cable and self-terminating twinax T connector are included with board
  • Ethernet 10BaseT/2
  • Ethernet 10/100BaseT
  • Legacy parallel for older hosts with non-standard parallel interfaces
  • Token Ring
    <>Graphics and Bar Codes
    Horizontal:
  • 60, 120, or 240 dpi
    Vertical:
  • 72 or 144 dpi
    Bar Codes:
  • Interleaved 2 of 5, Bidirectional 2 of 5, Matrix 2 of 5, Industrial 2 of 5, Code 3 of 9, EAN-8/13, Code 11, Code BCD, Codabar A/B/C/D, UPC-A/E, Code 93, Code 128 (A-B-C), Royal mail, POSTNET
    Sensors
  • Paper out, paper jam, ribbon jam, print gap
    Physical
    Size (HxWxD):
  • 55 dBa front-enclosed pedestal: 42 x 26.5 x 25 in. (1077 x 679 x 635 mm)
  • 50 dBa quietized cabinet: 42 x 27 x 29 in. (1077 x 686 x 737 mm)
  • 60 dBa open pedestal: 39 x 26.6 x 25 in. (991 x 679 x 635 mm)
    Weight:
  • 55 dBa front-enclosed pedestal: 175 lbs (79.3 kg) unboxed
    220 lbs (99.7 kg) boxed
  • 50 dBa quietized cabinet: 295 lbs (133.8 kg) unboxed
    340 lbs (154.2 kg) boxed
  • 60 dBa open pedestal: 169 lbs. (76.8 kg) unboxed
    214 lbs (97.3 kg) boxed

    Operating Environment
    Temperature:
    39 to 104 F (4 to 40 C)

    Humidity:
  • 15 to 90% noncondensing
    Acoustics:
  • 55 dBa, front-enclosed pedestal
  • 50 dBa, quietized cabinet
  • 60 dBa, open pedestal
    Voltage:
  • 120 VAC and 240 VAC, 15%; auto range seeking
    Power Considerations:
  • Idle: 5050: 35 watts
    5100: 35 watts
  • Printing: 5050: 213 watts
    5100: 350 watts
  • Maximum: 5050: 400 watts (1370 BTU/hr)
    5100: 524 watts (1795 BTU/hr)
  • Meets US EPA Energy Star program for power-saving requirements
    Reliability
    MTBF:
  • 8,000 hours at 25% duty cycle All trademarks are property of their respective holders at the time of this publication.