IBM Infoprint Color 1454 & 1464 (4924)

 
 
 
 


IBM Infoprint 1454 Printer
IBM 4924-N04 Infoprint Color 1454N Printer
Fully refurbished with 90-day warranty
4924-N04 75P6228
$950.00


IBM 4924-N01 Infoprint Color 1464N Printer
Fully refurbished with 90-day warranty
4924-N01 75p6225



IBM 4924-N01 Infoprint Color 1464N Printer
Fully refurbished with 90-day warranty
4924-N01 75P6225


IBM 4924-DN4 Infoprint Color 1454DN Printer
New
4924-DN4 75P6229 (New)

Retired, no longer available: Contact for alternatives



IBM 4924-DN4 Infoprint Color 1454DN Printer
Fully refurbished with 90-day warranty
4924-DN4 75p6229
$950.00


IBM 4924-DN1 Infoprint Color 1464DN Printer
Fully refurbished with 90-day warranty
4924-DN1 75p6226
$1136.00


Looking for IBM Infoprint 1454 & 1464 Parts?
4924-n04 75P6228 1454 n4924-N01 75P6225 1464 n4924-DN4 75P6229 1454 dn4924-DN1 75p6226 1464 dn

Supplies
Toner
75P4043 Toner Cartridge, Black
New
75P4043 6K Page Yield (New)



Toner
75P4044 Toner Cartridge, Cyan
New
75P4044 6K Page Yield (New)


Toner
Toner
Toner
Toner
Toner
Toner
Toner
75P4051 IBM Return Program Toner Cartridge, Black
New
75P4051 6K Page Yield (New)
$176.00



75P4047 75P4055 75P4051 IBM InfoPrint Color 1354 1454 1464 Series Black Toner Cartridge
New
75P4047 75P4055 75P4051 15K Yield Compatible (New)
$161.00


Toner
75P4052 IBM Return Program Toner Cartridge, Cyan
New
75P4052 6K Page Yield (New)
$245.00



75P4048 75P4056 75P4052 IBM InfoPrint Color 1354 1454 1464 Series Cyan Toner Cartridge
New
75P4048 75P4056 75P4052 15K Yield Compatible (New)
$304.00


Toner
75P4053 IBM Return Program Toner Cartridge, Magenta
New
75P4053 6K Page Yield (New)
$245.00



75P4049 75P4057 75P4053 IBM InfoPrint Color 1354 1454 1464 Series Magenta Toner Cartridge
New
75P4049 75P4057 75P4053 15K Yield Compatible (New)
$304.00


Toner
75P4054 IBM Return Program Toner Cartridge, Yellow
New
75P4054 6K Page Yield (New)
$245.00



75P4050 75P4058 75P4054 IBM InfoPrint Color 1354 1454 1464 Series Yellow Toner Cartridge
New
75P4050 75P4058 75P4054 15K Yield Compatible (New)
$304.00


Toner

75P4047 75P4055 75P4051 IBM InfoPrint Color 1354 1454 1464 Series Black Toner Cartridge
New
75P4047 75P4055 75P4051 15K Yield Compatible (New)
$161.00



1464 only
Toner
75P4056 IBM Return Program High Yield Toner Cartridge, Cyan
New
75P4056 15K Page Yield (New)
$399.00



75P4048 75P4056 75P4052 IBM InfoPrint Color 1354 1454 1464 Series Cyan Toner Cartridge
New
75P4048 75P4056 75P4052 15K Yield Compatible (New)
$304.00



1464 only
Toner

75P4049 75P4057 75P4053 IBM InfoPrint Color 1354 1454 1464 Series Magenta Toner Cartridge
New
75P4049 75P4057 75P4053 15K Yield Compatible (New)
$304.00



1464 only
Toner
75P4058 IBM Return Program High Yield Toner Cartridge, Yellow
New
75P4058 15K Page Yield (New)
$399.00



75P4050 75P4058 75P4054 IBM InfoPrint Color 1354 1454 1464 Series Yellow Toner Cartridge
New
75P4050 75P4058 75P4054 15K Yield Compatible (New)
$304.00



1464 only
53P9372
53p9372
53P9372 Toner Waste Container
New
53P9372 180000 b/w; 50000 color (New)


28P2848
56p2848



56P2910
59p2910


39V2645 115V Fuser Maintenance Kit
New
39V2645 (New)
$295.00


28P2019
28P2019 Staple Cartridge 3,000 x 3

Options

(#4505, P/N 75P6428) 500-Sheet Drawer
75P6428

75P6429
(#4501, P/N 75P6429) 500-Sheet Tray
75P6429 500-Sheet Tray
New
75P6429 (New)
$95.00


(#4520, P/N 75P6430) 2000-Sheet Drawer
75P6430
75P6430 2000-Sheet Drawer
New
75P6430 (New)

Retired, no longer available: Contact for alternatives


(#4502, P/N 75P6431) Envelope Drawer
75P6431
75P6431 Envelope Drawer (IP1464)
New
75P6431 (New)
$285.00


(#4402, P/N 75P6432) Duplex Unit
(#4620, P/N 75P6433) Output Expander
75P6433
75P6433 Output Expander
New
75P6433 (New)
$204.00


(#4640, P/N 75P6434) 5-Bin Mailbox
75P6434

(#4530, P/N 75P6435) Outdoor Media Drawer
75P6435
75P6435 Outdoor Media Drawer
New
75P6435 (New)
$380.00


75P6436
(#4630, P/N 75P6436) Banner Tray

(#4820, P/N 75P6439) Card for IPDS & SCS/TNe
Ram
75p6439 IPDS/SCS/TNE Card (#4820)
Fully refurbished with 90-day warranty
75p6439
$285.00




(#4821, P/N 75P6437) ImageQuick Card
Ram
75P6437 ImageQuick for 1454
New
75P6437 (New)
$285.00


(#4870, P/N 75P6438) Bar Code Card
Ram
75P6438 Bar Code Card
New
75P6438 (New)
$285.00


(#4823, P/N 75P6440) Decryption Card
Ram
75P6440 Decryption Card
(#4565, P/N 75P6441) Printer Stand
75P6441 Printer Stand
New
75P6441 (New)
$475.00


(#4542, P/N 75P6442) Op Panel Cover75P6442 Op Panel Cover
(#4560, P/N 53P9326) Finisher S
53P9327


53P9327
(#4622, P/N 53P9327) Finisher T

75P5008
(#4329, P/N 75P5008) 20+ GB ISP Hard Disk w/Adapter
75p5008 20+GB Hard Disk with Adapter
New
75p5008 (New)
$499.00


(#4570, P/N 53P7101) Scanner Shelf
(#4364, P/N 53P9328) 64 MB Memory DIMM
Ram
53P9328 IBM Brand 64MB memory DIMM
New
53P9328 (New)
$129.00


(#4390, P/N 53P9329) 128 MB Memory DIMM
Ram
53p9329 IBM Brand 128MB Memory DIMM
New
53p9329 (New)
$119.00



53p9329 IBM Brand 128MB Memory DIMM
Fully refurbished with 90-day warranty
53p9329
$65.00


(#4391, P/N 53P9330) 256 MB Memory DIMM
Ram


53p9330 IBM Brand 256MB Memory DIMM
Fully refurbished with 90-day warranty
53p9330
$138.00


(#4392, P/N 75P4657) 512 MB Memory DIMM
Ram

(#4876, P/N 75P4694) Optra Forms 16 MB Flash Card
Ram
75P4694 16MB Optra Forms Flash
New
75P4694 (New)
$424.00


(#4036, P/N 75P4690) 16 MB Flash Card
Ram
75p4690 16MB Flash
New
75P4690 (New)
$69.00



Sale75p4690 16MB Flash
Fully refurbished with 90-day warranty
75P4690
$95.00 $19.00


(#4038, P/N 75P4691) 32 MB Flash Card
Ram
75p4691 32MB Flash
Fully refurbished with 90-day warranty
75P4691
$190.00


(#4881, P/N 75P4693) Optra Forms 32 MB Flash Card
Ram
75P4693 Optra Forms 32MB Flash
New
75P4693 (New)

Retired, no longer available: Contact for alternatives


Optra Forms 16 MB Flash Card
Ram
75P4694 16MB Optra Forms Flash
New
75P4694 (New)
$424.00



75P4694 16MB Optra Forms Flash
Fully refurbished with 90-day warranty
75P4694
$285.00


(#4132, P/N 28P1845) External Serial Adapter
28P1845
28P1845 External Serial Attachment
Fully refurbished with 90-day warranty
28P1845
$95.00


(#4183, P/N 28P1874) 50 ft. Serial Cable
28P1874 50 ft. Serial Cable
New
28P1874 (New)
$34.00


(#4120, P/N 75P4696) Token-Ring
75p4696 Token Ring Card
Fully refurbished with 90-day warranty
75P4696

Retired, no longer available: Contact for alternatives


(#4162, P/N 75P4833) Ethernet 10/100BaseTX
75P4833

(#4174, P/N 75P6854) Ethernet to USB Adapter
75P6854

(#4880, P/N 53P9307) Optra Forms Manager
(#4877, P/N 53P9343) Optra Forms Hard Disk w/Adapter
53P9343 Optra Forms**Hard Disk w/Adapt
New
53P9343 (New)

Retired, no longer available: Contact for alternatives


(#4878, P/N 28P1869) Optra Forms 2-Key Security
(#4170, P/N 53P7854) 802.11b Wireless Adapter
53P7854 1

(P/N 75P6857) 802.11g Wireless to Ethernet
75P6857
75p6857 802.11g wireless
Fully refurbished with 90-day warranty
75p6857
$190.00


(#4138, P/N 75P4706) RS-232/422C Serial Interface Card
75P4706
75P4706 RS232 Serial Card
New
75P4706 (New)
$39.00


(#4139, P/N 75P4707) Parallel 1284-B Interface Card
75P4707

(#4180, P/N 28P1871) 10 ft. Parallel Cable
28P1871 10 ft. Parallel Cable 1284
Fully refurbished with 90-day warranty
28p1871
$12.00


(P/N 75P6854) 802.11g Wireless to USB
75P6854

(#4163, P/N 28P1839) Ethernet 10/100BaseTX-1 Prt
28P1839
28P1839 Ethernet 10/100BaseTX-1 Port
Fully refurbished with 90-day warranty
28P1839
$266.00


(#4184, P/N 28P1875) 2-meter USB Cable
(#4164, P/N 28P1840) 10/100BaseTX-3 Port
28P1840

(#4165, P/N 28P1841) Ethernet 10/100TX/10Base2-1 Pt
28P1841

(#4121, P/N 28P1836) Token-Ring-3 Port
28P1836
28P1836 Token-Ring-3 Port
New
28P1836 (New)
$285.00


(#4871, P/N 28P1862) Optra Forms Software
28P1862 Optra Forms Software
New
28P1862 (New)

Retired, no longer available: Contact for alternatives


(#4872, P/N 28P1863) Optra Forms Director Software
28P1863 Optra Forms Director Software
New
28P1863 (New)

Retired, no longer available: Contact for alternatives



The IBM 4924 Infoprint Color 1464 and 1454 models offer faster printing of up to 25 pages per minute (PPM)(1) for color and monochrome printing. They offer high-quality, medium-volume color print solutions with flexible paper handling and networking options.

Note: The IBM Infoprint Color 1464 and 1454 are replacements for IBM Infoprint Color 1354 and 1354L workgroup printers.

Note: (1) Exact print speed varies depending on document complexity, system configuration, software applications, driver, and printer status.

Model Abstract 4924-N01

The IBM 4924 InfoPrint 1464 Model N01 is a 25 pages-per-minute low voltage network printer with a 6,000-print toner cartridge, 600 MHz PMC-Sierra RM7065C processor, 128 MB of memory standard (512 MB maximum), 100-sheet auxiliary tray, a 500-sheet drawer, 500 sheet tray, integrated 10/100BaseTX Ethernet, USB interface, Standard input capacity of 600 sheets, standard output capacity of 250 sheets, and language support based on part number.

Model Abstract 4924-N04

The IBM 4924 InfoPrint 1454 Model N04 is a 25 pages-per-minute low voltage network printer with a 3,000-print toner cartridge, 600 MHz PMC-Sierra RM7065C processor, 128 MB of memory standard (512 MB maximum), 100-sheet auxiliary tray, a 500-sheet tray, 2000 sheet drawer, integrated 10/100BaseTX Ethernet, USB interface, Standard input capacity of 600 sheets, standard output capacity of 250 sheets, and language support based on part number.

Model Abstract 4924-DN1

The IBM 4924 InfoPrint 1464 Model DN1 is a 25 pages-per-minute low voltage duplex network printer with a 6,000-print toner cartridge, 600 MHz PMC-Sierra RM7065C processor, 128 MB of memory standard (512 MB maximum), 100-sheet auxiliary tray, a 500-sheet tray, 2000 sheet drawer, duplex, integrated 10/100BaseTX Ethernet, USB interface, Standard input capacity of 600 sheets, standard output capacity of 250 sheets, and language support based on part number.

Model Abstract 4924-DN4

The IBM 4924 InfoPrint 1454 Model DN4 is a 25 pages-per-minute low voltage duplex network printer with a 3,000-print toner cartridge, 600 MHz PMC-Sierra RM7065C processor, 128 MB of memory standard (512 MB maximum), 100-sheet auxiliary tray, a 500-sheet tray, 2000 sheet drawer, duplex, integrated 10/100BaseTX Ethernet, USB interface, Standard input capacity of 600 sheets, standard output capacity of 250 sheets, and language support based on part number.

Highlights

The IBM Infoprint Color 1464 is a replacement for Infoprint Color 1354 workgroup printer. It offers faster printing, up to 25 pages per minute (PPM)(1) for color and monochrome printing, 128 MB of memory standard, 6,000-print toner cartridge standard, and a wide range of paper handling and networking options.

The Infoprint Color 1454 is a lower-cost version of the Infoprint Color 1464. It still offers up to 25 PPM(1) for color and monochrome printing and 128 MB of standard memory. Infoprint Color 1454 comes with a lower capacity (3,000-print) toner cartridge and fewer paper handling options. The Infoprint Color 1454 cannot be upgraded to an Infoprint Color 1464.

Both printers offer full IPDS color printing.

Note: (1) Exact print speed varies depending on document complexity, system configuration, software applications, driver, and printer status.

Description

IBM Infoprint Color 1464 and 1454 are color laser printers that support up to A4/Letter-size media at up to 25 pages-per-minute (PPM).

The Infoprint Color 1464 comes with 6,000-print toner cartridge and a wide range of paper handling options. The more economical Infoprint Color 1454 comes with a lower capacity (3,000-print) toner cartridge and fewer paper handling options.

The Infoprint Color 1454 cannot be upgraded to an Infoprint Color 1464. Both printers come with:

A 600 MHz PMC-Sierra RM7065C processor

128 MB of memory standard (512 MB maximum)

Ethernet standard

First page out time as fast as 13.0 seconds for monochrome, 15.0 seconds for color

Optional Token-Ring, Ethernet, and wireless Ethernet connectivity options

Full IPDS color printing for text, image, bar code, and graphics data

The printers come in the following models:

Network model:

The network model comes with a 600 MHz PMC-Sierra RM7065C processor, 128 MB memory, a 100-sheet auxiliary tray, a 500-sheet drawer, integrated 10/100BaseTX Ethernet, and a USB interface. Standard input capacity is 600 sheets and output capacity is 250 sheets.

Duplex Network model:

The duplex network model comes with a 600 MHz PMC-Sierra RM7065C processor, 128 MB memory, a 100-sheet auxiliary tray, a 500-sheet drawer, duplex, integrated 10/100BaseTX Ethernet, and a USB interface. Standard input capacity is 600 sheets and output capacity is 250 sheets.

The Infoprint Color 1454 is a lower-cost version of the Infoprint Color 1464. It ships with a 3,000-print toner cartridge (versus a 6,000-print cartridge for the Infoprint Color 1464). The Infoprint Color 1454 supports fewer media handling features than the Infoprint Color 1464.

The Infoprint Color 1454 cannot be upgraded to an Infoprint Color 1464.

Media handling features

The Infoprint Color 1454 has the following input media handling options: 500-sheet drawer, 500-sheet tray, and duplex unit. The printer supports up to two drawers total for a maximum input capacity of 1,100 sheets. No output features are available.

The Infoprint Color 1464 has the following input media handling options: 500-sheet drawer, 500-sheet tray, duplex unit, 2,000-sheet drawer, envelope drawer, output media drawer, and a banner tray. The printer supports up to four drawers total for a maximum input capacity of 3,100 sheets. The following output media handling features are available: output expander, 5-bin mailbox, and Finisher S and T. The printer supports a maximum output capacity of 3,900 sheets.

High performance controller

The Infoprint Color 1464 and 1454 come with PostScript 3 emulation and PCL 6 emulation as standard data streams.

Memory:

The controller has one slot for memory DIMMs, one slot for flash cards, one slot for application solution cards, one slot interface cards, and one slot for hard disk/adapter.

All models come with 128 MB of memory soldered onboard and can support a maximum of 512 MB of memory with one 512 MB DIMM installed (in this case the 128 MB onboard memory is not utilized).

Flash memory up to 32 MB is supported using the flash memory DIMMs.

Printer system attachment interfaces:

All models come with a USB 2.0 interface and a 10/100BaseTX Fast Ethernet interface as standard.

The controller supports optional network connections through the interface adapter card slot. A wireless adapter is also available.

Usage rates

The maximum monthly usage for the Infoprint Color 1464 is 100,000 impressions.
The maximum monthly usage for the Infoprint Color 1454 is 70,000 impressions.
IBM does not recommend printing to the monthly maximum on a consistent basis.

Print quality

The resolution of the printer is 1200 x 1200 dots per inch (dpi) (at 10 PPM) and the following print-quality modes are supported:
4800CQ (default full printer speed)
1200 x 1200 dpi (at 10 PPM)

The Infoprint Color 1464 and 1454 offer a ColorSaver Mode that allows end users to print images and graphics lighter. Text will print at print darkness "4" while images and graphics print at Toner Darkness "1". The ColorSaver Mode is located on the Op panel under the Color Menu and may be selected from the IBM Custom PsotScript Driver.

Font support

The printer's resident fonts include support for following:

Emulation Number of Scalable Fonts Number of Bitmapped Fonts
------------ ------------------------ -------------------------
PCL 6 89 2
PostScript 3 158 0

Color Printing

Full color printing support has been added to all IPDS towers. Print color text, images, graphics, and bar codes in documents from an iSeries or AS/400 using V5R2 or later, from mainframe systems and from AIX or Windows using Infoprint Manager.

N-up and N-up Explicit Page Placement

Print using 1-4 partitions per side or up to 8 pages per sheet using IPDS N-up and N-up Explicit Page Placement (N-up EPP). With N-up EPP, up to 8 pages can be placed in any order on the front or back of a sheet. Formatting of the data to fit within the defined partitions is performed by the host application.

Double Byte Character Set Printing (DBCS) for IPDS

DBCS characters in Traditional Chinese, Simplified Chinese, Korean, and Japanese can be downloaded and printed from the host. Fonts may be captured to disk or flash using the Font Capture feature to reduce network traffic and transmission time.

Accessibility by people with disabilities

For hardware offerings

The following features support use by people with disabilities:
Controls and latches are operable with one hand and minimal dexterity.
Keys are discernible by touch without activating them.
The display, controls, latches, and levers are accessible to someone in a wheel chair.
Color is used as an enhancement for conveying information, and as an additional method of distinguishing between buttons, controls, and latches.

Customer Setup (CSU)

Technical Description

Performance Specifications

The Infoprint Color 1464 and 1454 maximum print speeds are shown in the following table. Actual performance depends on:
Interface to the host (serial, parallel, network)
Host system and application
Network complexity and traffic
Page complexity and content
Certain printer options installed and selected
Printer memory
Printer resolution
Media size, media type setting and tray source

Media (tray 1) 4800 CQ 1200
------------------ -------- -----------
(PPM simplex, SPM
duplex)
Letter 25.0 ppm 10.0 ppm
A4 23.7 ppm 9.5 ppm
Legal 20.0 ppm 8.1 ppm

Other Media
Transparency 10.0 ppm 10.0 ppm
Cardstock 10.0 ppm 10.0 ppm
Labels 10.0 ppm 10.0 ppm
Coated Paper 10.0 ppm 10.0 ppm
Coated Cover 10.0 ppm 10.0 ppm

First Copy Times are shown in the following table.

Printer Mode Time (seconds)
---------------- --------------
From Standby
Monochrome <13.5
Color <15.0
From Power Saver
Monochrome <160.0
Color <160.0

Note: First Copy time is defined as the elapsed time when hitting enter on the PC to the page exiting to the output bin. Paper is picked from the primary tray and paper exits to the primary output bin. Media is letter size paper printed in 300 and 600 dpi simplex printing.

Print Area

The Infoprint Color 1464/1454 printable area is limited to within 402 mm (0.167 in.) of top, bottom, left or right edges of the media. Any information placed outside this specified printable area will not print.

Print Quality

General Statement on Print Quality

During the life of the printer, components are subject to wear based on usage. Printers continuously operating at or near the maximum duty cycle may require service for replacement of these components to ensure high quality printing and good performance throughout the life of the printer.

Customer-replaceable maintenance items are recommended every 200,000 pages for the fuser and 120,000 pages for the ITU.

Automatic Calibration

The Infoprint Color 1464 and 1454 performs an automatic calibration under the following conditions: 1. at power on, 2. after 8 hours of Power Saver, 3. every 500 pages, 4. after changing a print cartridge, or 5. after changing an intermediate transfer unit. A manual calibration can be initiated by selecting "Color Adjust" from the Color Menu.

Color and Black & White Printer Controls

The Infoprint Color 1464 and 1454 will offer several controls that will allow the user or Printer / Network Administrators to direct the preferred output to be Color or Black & White.

Driver

A choice to print a color job in black & white is available in Infoprint Color 1464 and 1454 Drivers. Printing jobs in color is the default setting.

Infoprint Color 1464 and 1454 will offer a Black only driver (Windows NT 4.0, XP, 2000, Windows Server 2003) that will allow Printer / Network Administrators to limit the printing from some workstations to black and white only.

Op Panel

Print Mode

Allows users not utilizing an Infoprint Color 1464 and 1454 Driver to print a color job in black & white by selecting Black & White from the menu. The selections are Color (default setting) and Black & White. "Print Mode" is located under the Color Menu. These Op panel selections are ignored when using an Infoprint Color 1464 and 1454 Driver for Windows.

Printer Usage

Printer Usage modes are set to control the starting position of the Intermediate Transfer Unit (ITU) and how the printer software controls its position depending on the color content of the print job and/or the Infoprint Color 1464 and 1454 Driver or "Print Mode" selection. There are two selections: Max Speed and Max Yield (default setting). "Printer Usage" is located under the Setup Menu.

Processing a significant number of black pages with the ITU engaged may reduce the life of the color photoconductors and may affect the ultimate life of the color print cartridges (the photoconductor is an integral part of the cartridge).

Maximum print speed is obtained when the Driver and Print Mode are set to color (default settings) and Printer Usage is set to Max Speed. Any other selections can reduce throughput depending on the job content and the selection. It takes approximately one second to lower the ITU and approximately six seconds to raise it. The following table summarizes the effect of selections on the ITU movement.

"Printer Usage" Driver or "Print ITU Initial
Selection Mode" Selection Position ITU Movements
--------------- ---------------- -------------- ------------------- -
Max Speed Color Raised/Engaged Stays Raised

Monochrome Raised/Engaged Lowers if 3
consecutive black
Max Yield Color Raised/Engaged pages are in the
queue OR if the
Monochrome Raised/Engaged current page and at
least the last 2
pages were black

Black & White Lock

This feature allows Printer/Network Administrators to "lock" the Infoprint Color 1464 and 1454 printer in a mode that will only print black & white with the ITU disengaged. This feature can not be overridden with any other menu or driver selection. "Black and White Lock" is located under the Setup Menu.

Print Permissions

Print Permissions allows customers to configure the Infoprint Color 1464 and 1454 to only print color for certain approved network user IDs. MarkVision will host a utility that allows IT administrators to enter user ID exceptions to normal printing function. User ID specific permissions are entered and stored in the printer. They can be updated at any time and as many times as customers wish. The list is limited to 100 user IDs per printer. The list is intended to be an exceptions list. (i.e. if normal use allows color printing for most people the list can be used to exclude certain users from color printing). Possibly users who have been identified as abusers of color or users who clearly have no business need to print color.

Conversely, normal usage could be no color printing and the list is used to allow color printing for select users who have demonstrated a business need to print color.

Toner Darkness Settings

Infoprint Color 1464 and 1454 will have 5 Toner Darkness levels for color and mono. The printer will ship with Printer Darkness set at 4. When printing in color, level 5 is equal to level 4.

Setting 1 2 3 4 5
-------------------------------- ------ ------ ------ ------- ------
Delta toner from default (mono) -50% -30% -15% default +10%
Delta toner from default (color) -50% -30% -15% default n/a

The Toner Darkness@ menu is available through the operator panel under the Print Quality menu and also accessible through the IBM PostScript Driver.

Color Correction Settings

The Infoprint Color 1464 and 1454 will offer the following color correction settings:

Auto (default)

Applies different color correction to each object on the printed page depending upon the type of object and how the color for each object is specified.

Off

No color correction is implemented.

Manual

Allows users to customize color correction output from the Op Panel.

"Auto/default" Color Correction Setting

Incoming Color Format Color Correction Output
--------------------- -----------------------
RGB Graphics sRGB Vivid
RGB Image sRGB Display
RGB Text sRGB Vivid
CMYK Graphics US CMYK
CMYK Image US CMYK
CMYK Text US CMYK
US CMYK

"Manual" Color Correction Output Op Panel Selections

Incoming Color Format Color Correction Output Selections
--------------------- ----------------------------------------
RGB Graphics sRGB Vivid, Vivid, sRGB Display, RGB Off
RGB Image sRGB Vivid, Vivid, sRGB Display, RGB Off
RGB Text sRGB Vivid, Vivid, sRGB Display, RGB Off
CMYK US CMYK, Vivid CMYK, CMYK Off, Euro CMYK

Note: US CMYK is default for low volt printers, Euro CMYK is default for high volt printers.

"Manual" Color Correction Output Selection Definitions

Vivid

Applies a color correction algorithm that produces brighter, more saturated colors. May be selected for all incoming color formats.

sRGB Display

Applies color correction to produce output that approximates the colors displayed on a computer monitor.

sRGB Vivid

Increased color saturation for the sRGB Display color correction.

RGB Off

No color correction is implemented.

US CMYK

Applies color correction to approximate SWOP R color output.

Vivid CMYK

Increased color saturation for the US CMYK color correction.

CMYK Off

No color correction is implemented.

Euro CMYK

Applies color correction to approximate EuroScale color output

Color Balance Control

The Infoprint Color 1464 and 1454 will offer a Color Balance Control. It is a color correction option that allows the user to increase or decrease the amount of toner going to the page individually for the cyan, magenta, yellow and black color planes. The scale for the adjustments is +5 to -5.

Color Saver Mode

The Infoprint Color 1464 and 1454 will offer a Color Saver Mode that allows end users to print images and graphics lighter. Text will print at Toner Darkness "4", while images and graphics print at Toner Darkness "1". The Color Saver Mode is located on the Op panel under the Color Menu and may be selected from the IBM Custom PostScript Driver.

Coverage Estimator

The Coverage Estimator is designed to give the user an approximation of percent coverage per color when printing a composite color document. The estimation of coverage can be used to calculate an approximate cost of any given document if yield and coverage are assumed to be linear and inversely related. This tool should allow customers to discover for themselves that printing color documents on color laser printers is frequently an economical way to create these documents. Furthermore, they can discover that many black and white documents can be improved for a nominal increase in cost.

The Coverage Estimator allows end users to estimate the percent coverage of cyan, magenta, yellow and black on a page. The estimates will be printed on the page. The Coverage Estimator is available from the Op Panel under the utility menu.

The Coverage Estimator utilizes an algorithm that counts pixels for each toner color: black, cyan, magenta and yellow. Once the utility is selected, the printer overlays the percent coverage on every printed page. The printed percentages are not included in the estimate. The utility can be turned off by deselecting it from the menu or by powering off.

The Coverage Estimator is intended to only estimate the coverage on a given page. For all toner colors that are used, the minimum percentage reported will be two percent. Reported values may vary from printer to printer. The accuracy of the estimates may be affected by the fullness of the print cartridges, environmental conditions, media type, application, application settings, driver, driver settings, and the content of the page. IBM makes no claim as to the accuracy of the estimated percents.

Data Streams

The Infoprint Color 1464 and 1454 supports the following data streams:
PostScript Level 3 Emulation
PCL 6 Emulation
PDF 1.2 and 1.3

Fonts

Fonts and Symbol Sets

There are 88 symbol sets in the PCL 6 emulation to support all the languages that use these characters. The symbol set names are listed below. Not all symbol sets are supported by all fonts. Refer to the Technical Reference manual on Publications CD or use the printer operator panel to find which symbol sets are supported by each font.

The Infoprint Color 1464 and 1454 will have UTF-8 code support standard. UTF-8 code is a particular way in which fonts are accessed. UTF-8 code is a particular way in which fonts are accessed. UTF-8 is available for PCL and PostScript fonts.

The fonts in the PCL emulation are compatible with the fonts in the HP4500 and include four additional fonts and many extra symbol sets to support extra languages and applications. The fonts in the PostScript emulation are compatible with Adobe PostScript 3 and include 20 additional fonts above and beyond the Adobe PostScript 3 fonts.

Additional fonts can be downloaded to the printer RAM or optional Flash DIMM or Hard Disk. PCL emulation supports both scalable and bitmapped downloadable fonts. PostScript emulation supports only downloadable scalable fonts, and PPDS emulation supports only downloadable bitmapped fonts. Font cards and font cartridges are not supported.

Included on the CD-ROM shipped with the printer are a variety of downloadable fonts for Hebrew and Arabic and additional support for the Euro currency character.

Also included on the CD-ROM is the FontVision Font Management utility and screen fonts to match the resident scalable fonts.

Media Support

All models come standard with one 500-sheet paper drawer and a 100-sheet auxiliary tray. One 250-sheet output bin is standard. See tables below for standard and maximum media capacities.

Input Media Capacities (sheets)

Infoprint 1464

Standard Optional Optional Optional Total
Aux. Tray Drawer 1 Drawer 2 Drawer 3 Drawer 4 Capacity
--------- -------- -------- -------- -------- --------
Standard 100 500 600
Maximum with
2000-sheet dwr 100 500 500 2000 3100
Maximum w/o
2000-sheet dwr 100 500 500 500 500 2100

Infoprint 1454

Standard Optional Total
Aux. Tray Drawer 1 Drawer 2 Capacity
--------- -------- -------- --------
Standard 100 500 600
Maximum 100 500 500 1100

Output Media Capacities (sheets)

Infoprint 1464

Optional Optional Optional
Standard 5-Bin Output Finisher Total
Output Bin Mailbox Expander S or T Capacity
---------- -------- -------- -------- --------
Standard 250 250
Maximum with
5-Bin Mailbox 250 500 3000 3750
Maximum with
Output Expander 250 650 3000 3900

Note: The 5-Bin Mailbox and Output Expander are mutually exclusive.

Infoprint 1454

Standard Total
Output Bin Capacity
---------- --------
Standard 250 250
Maximum 250 250

Media Sizes Supported

Input Media

500- 2000-
Aux. Sheet Sheet Envelope
Paper Size & Type Tray Drawer Drawer Duplex Drawer
------------------------ ---- ------ ------ ------ --------
A4 (210x297 mm) Yes Yes Yes Yes No
Letter (8.5"x11"] Yes Yes Yes Yes No
A5 (148x210 mm) Yes Yes Yes Yes No
B5-JIS (182x257 mm) Yes Yes Yes Yes No
Legal (8.5"x14"] Yes Yes Yes Yes No
Executive (7.25"x10.5"] Yes Yes Yes Yes No
Folio (8.5"x13"] Yes Yes No Yes No
Statement (5.5"x8.5"] Yes Yes No Yes No
7 3/4 Env. (98x191 mm) Yes No No No Yes
9 Env. (98x225 mm) Yes No No No Yes
Commercial #10 Env. Yes No No No Yes
(104.8x241.3 mm)
C5 Env. (169x229 mm) Yes No No No Yes
B5 Env. (176x250 mm) Yes No No No Yes
DL Env. (110x220 mm) Yes No No No Yes
Other Env.(1) Yes No No No Yes
Universal(2) Yes Yes No Yes No
Universal(3) Yes No No No No
Universal(4) Yes Yes No Yes No
Paper Yes Yes Yes Yes No
Transparencies Yes Yes No No No
Cardstock Yes Yes No Yes No
Vinyl Labels Yes Yes No No No
Paper Labels Yes Yes No Yes No
Polyester Labels Yes Yes No No No
Dual Web Labels Yes Yes No Yes No
Integrated Labels Yes Yes No Yes No

Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.).

Note: (2) Size 139.7x210mm to 215x355.6mm (5.5x8.27 in. to 8.5x14 in.).

Note: (3) Size 69.85x127mm to 229x355.6mm (2.75x5 in. to 9.01x14 in.).

Note: (4) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).

Output Media

Std Fin. Fin. Fin.
Out. 5-bin Output Staple Job Output
Paper Size & Type Bin Mailbox Expand /Punch Offset Bin
----------------------- ---- ------- ------ ------ ------ ------
A4 (210x297 mm) Yes Yes Yes Yes Yes Yes
Letter (8.5"x11"] Yes Yes Yes Yes Yes Yes
A5 (148x210 mm) Yes No Yes Yes Yes Yes
B5-JIS (182x257 mm) Yes Yes Yes Yes Yes Yes
Legal (8.5"x14"] Yes Yes Yes Yes Yes Yes
Executive (7.25"x10.5"] Yes Yes Yes Yes Yes Yes
Folio (8.5"x13"] Yes Yes Yes Yes Yes Yes
Statement (5.5"x8.5"] Yes No Yes Yes Yes Yes
7 3/4 Env. (98x191 mm) Yes No Yes No No No
9 Env. (98x225 mm) Yes No Yes No No No
Commercial #10 Env. Yes No Yes No No No
(104.8x241.3 mm)
C5 Env. (169x229 mm) Yes No Yes No No No
B5 Env. (176x250 mm) Yes No Yes No No No
DL Env. (110x220 mm) Yes No Yes No No No
Other Env.(1) Yes No Yes No No No
Universal(2) Yes No Yes No No No
Universal(3) Yes No Yes No No No
Universal(4) Yes No Yes No No No
Paper Yes Yes Yes Yes Yes Yes
Cardstock Yes No Yes No No No
Transparencies Yes No Yes No No No
Vinyl Labels Yes No Yes No No No
Paper Labels Yes No Yes No No No
Polyester Labels Yes No Yes No No No
Dual Web Labels Yes No Yes No No No

Note: (1) Size 98.4x162mm to 176x250mm (3.87x6.38 in. to 6.93x9.84 in.).

Note: (2) Size 139.7x210mm to 215x355.6mm (5.5x8.27 in. to 8.5x14 in.).

Note: (3) Size 69.85x127mm to 229x355.6mm (2.75x5 in. to 9.01x14 in.).

Note: (4) Size 148x182mm to 215.9x355.6mm (5.83x7.17 in. to 8.5x14 in.).

Media Type and Weights Supported

Input Media

Print Media Aux. Tray(5) 500-Sheet Drwr 2000-Sht Drawer
------------------ ------------- -------------- ---------------
Copier/Xerographic 60-176 gsm 60-176 gsm 60-176 gsm
20-47 lb 20-47 lb 20-47 lb

Specialty Paper 88-176 gsm 88-176 gsm 88-176 gsm
Gloss Book 60-120lb book 60-120lb book 60-120lb book

Specialty Paper 162-176 gsm 162-176 gsm 162-176 gsm
Gloss Cover 60-65lb cover 60-65lb cover 60-65lb cover

Card Stock Upper
Limit grain Long(1)
- Index-Bristol 163 gsm(90lb) 163 gsm(90lb) No
- Tag 163 gsm(100lb) 163 gsm(100lb) No
- Cover 176 gsm(65lb) 176 gsm(65lb) No

Card Stock Upper
Limit grain Short(1)
- Index-Bristol 199 gsm(110lb) 199 gsm(110lb) No
- Tag 203 gsm(125lb) 203 gsm(125lb) No
- Cover 216 gsm(80lb) 216 gsm(80lb) No

Transparencies 161-169 gsm 161-169 gsm No
43-45 lb 43-45 lb No

Labels Upper Limit(2)
- Paper 180 gsm(48lb) 199 gsm(53lb) No
- Dual Web 180 gsm(48lb) 199 gsm(53lb) No
- Polyester 220 gsm(59lb) 220 gsm(59lb) No
- Vinyl 300 gsm(78lb) 260 gsm(78lb) No

Integrated Forms
- Pressure Area(3) 140-175 gsm 140-175 gsm No
- Paper Base 75-135 gsm 75-135 gsm No
20-36 lb 20-36 lb

Envelopes(5) 60-105 gsm No No
(Sulfite, wood-free 16-28lb bond(4)
or up to 100% cotton bond)

Note: All media specified in lb is bond.

Note: (1) For 60 to 176 g/m2 paper, grain long fibers are recommended. For papers heavier than 176 g/m2, grain short is preferred.

Note: (2) Dedicated label printing requires special label fuser cleaner. When using the label fuser cleaner, duplex printing is not supported.

Note: (3) Pressure sensitive area must enter the printer first.

Note: (4) 100% cotton content maximum weight is 24 lb. bond, 28 lb bond envelopes are limited to 25% cotton content. This spec applies to the auxiliary tray, not the optional 250-sheet drawer.

Note: (5) The duplex option supports the same weights and types as the printer except for transparencies, envelopes, and labels. Integrated trays include the standard 500 tray.

Output Media

Standard Bin Finisher
& Output Finisher Staple/Punch 5-bin
Print Media Expander Output Bin Offsetting Mailbox
------------------ ------------ -------------- -------------- -----------
Copier/Xerographic 60-74.9 gsm 60-74.9 gsm 60-74.9 gsm 60-74.9 gsm
16-19.9 lb 16-19.9 lb 16-19.9 lb 16-19.9 lb

Card Stock Upper
Limit grain Long(1)
- Index-Bristol 163 gsm(100lb) No No No
- Tag 163 gsm(100lb) No No No
- Cover 176 gsm (65lb) No No No

Card Stock Upper
Limit grain Short(1)
- Index-Bristol 199 gsm (110lb) No No No
- Tag 203 gsm (125lb) No No No
- Cover 216 gsm (80lb) No No No

Transparencies 138-146 gsm 138-146 gsm Offsetting No
37-39 lb 37-39 lb 138-146 gsm No
37-39 lb

Labels Upper Limit
- Paper 180 gsm (48lb) No No No
- Dual Web 180 gsm (48lb) No No No
- Polyester 220 gsm (59lb) No No No
- Vinyl 300 gsm (92lb) No No No

Integrated Forms
- Pressure Area(2) 140-175 gsm No No No
up to 47 lb
- Paper Base 75-135 gsm No No No
(long grain) 20-36 lb

Envelopes 60-105 gsm No No No
(Sulfite, wood-free 16-28lb bond(3)
or up to 100% cotton bond)

Note: All media specified in lb is bond.

Note: (1) For 60 to 176 g/m2 paper, grain long fibers are recommended. For papers heavier than 176 g/m2, grain short is preferred.

Note: (2) Pressure sensitive area must enter the printer first.

Note: (3) 100% cotton content maximum weight is 24 lb. bond. 28 lb bond envelopes are limited to 25% cotton content.

Additional Media Guidelines

Follow the media guidelines below for successful printing:

Paper

Rough, highly textured, limp, or pre-curled papers will result in lower print quality and more frequent paper feed failures.

Colored papers must be able to withstand 190 deg C (400 deg F) fusing temperature.

Preprinted forms and letterheads should be selected using guidelines found in the printer User's Guide. The chemical process used in preprinting may render some papers unsuitable for use with the Infoprint Color 1464 and 1454.

Unsuitable papers include multipart forms and documents; chemically treated papers; coated, synthetic and thermal papers; and preprinted papers requiring a high degree of registration.

Recycled paper less than 80g/sqm may cause unacceptable results.

Envelopes

All envelopes should be new, unused, and without package damage.

Envelopes with excessive curl or twist exceeding 6 mm, those stuck together, those with bent corners or nicked edges, or those that interlock should not be used.

Minimum weight: 60 g/m2 (16 lb.)

The following envelopes should not be used:
Envelopes with windows, holes, perforations, cutouts, or deep embossing.
Envelopes with metal clasps, string ties, or metal folding bars.
Envelopes with exposed flap adhesive when the flap is in the closed position.
For best results, printing on new 90 g/m2 (24 lb.) sulfite or 25% cotton bond envelopes is recommended.
Under high humidity conditions (over 60%), envelopes may seal during printing.

Transparencies

Use letter or A4-size sheets only.

Transparencies specifically designed for xerographic copy machines or laser printers may be used with the Infoprint Color 1354.

Labels

Labels should be selected using guidelines found in the User's Reference, Complete Printer Reference, and tested for acceptability.

Paper Sensing

The Infoprint Color 1464 and 1454 printer has the following paper sensors:

Standard Optional Optional
Input 500-Sht. 2000-Sht.
Sensing Function Trays Drawers Drawer
--------------------------- --------- -------- ---------
Paper Size Sensing
Paper Tray Yes Yes Yes
Auxiliary Tray No No No
Paper Out Sensing
Paper Tray Yes Yes Yes
Auxiliary Tray Yes No No
Tray Present Sensing
Paper Tray Yes Yes Yes
Auxiliary Tray No No No
Envelope Conditioning Yes No No
Misc. Other
Narrow Media Yes No No
Auto Size Yes No No
Tray Low Yes Yes No
Pass Through No Yes Yes
Cover Open/
Cartridge Present Yes No No
Input Sensor Yes No No
Fuser Exit Yes No No


Optional Optional
Output 5 -Bin Optional
Sensing Function Expander Mailbox Finisher
--------------------------- --------- -------- --------
Output Bin Near Full Yes No Yes
Output Bin Full Yes Yes Yes
Output Bin Empty No Yes No
Envelope Conditioning
Misc. Other
Pass Through Yes Yes Yes
Stapling Sensing
Stapler Low No No Yes
Staple Cartridge Present No No Yes
Stapler Empty No No Yes
Stapler Top Cover No No Yes
Stapler Access Door No No Yes

Certifications

The following sections highlight the approvals and certifications that Infoprint Color 1464 and 1454 are expected to receive.

120V Version

Underwriters Laboratories, Inc. UL 60950, Third Edition, Information Technology Equipment deviations D1 and D2

U.S. FDA, CDRH registration per 21 CFR Chapter I, Subchapter J, Section 1040

ENERGY STAR compliant

FCC Class B (w/o network cable) and FCC Class A (with network cable) per FCC Rules, Parts 2 and 15

Canadian Standards Association CAN/CSA-C22.2 No. 60950-00, Third Edition, Information Technology Equipment deviations D1 and D2 ?No ote: This and the UL standard are a single "bi-national" document, published jointly with UL?

Industry Canada (EMC) Compliance Statement

Official Mexican State Agency approval & import registration to equipment standard NOM-019-SCFI-1993 Safety of Data Processing Equipment ?Note: This is to be pursued by Lexmark Latin American Marketing - at the time of ANN/GA.?

IEC 320, International Standard Electrical Appliance Connectors

BSMI Approval (Taiwan)

Greenmark (Taiwan)

230V Version

ENERGY STAR compliant

International Electrotechnical Commission IEC 60950 2nd Edition, plus Amendments 1, 2, 3, 4. Information Technology Equipment, Including Electrical Business Equipment

IEC 61000-3-2 (Harmonics) and IEC 61000-3-3 (Flicker)

EN 60950 + Amendments 1, 2, 3, 4

IEC 60825-1, International Standard Safety of Laser Products

EN 60825-1

EN 55022:1998 Class B without network cable and Class A with network cable

EN 55024:1998

EN 61000-3-2: 1995

EN 61000-3-3: 1995

CISPR 22: 997 Class B without network cable and Class A with network cable

IEC 320, International Standard Electrical Appliance Connectors

CB Certificate and Test report to include the country differences of all participating CB Scheme members as listed at: www.cbscheme.com, with the exception of Canada (CA), Japan (JP), and U.S.A. (US). CB assessment shall be to IEC 60950 2nd ED. + A1+A2+A3+A4 and IEC 60825-1 +A11.

European Union - CE marking via EU Declaration of Conformity to the EMC (89/336/EEC) and Low Voltage (73/23/EEC) Directives

TUV "GS"

SMA "C-tick mark"

SEMKO "S" mark

PCBC "B" mark

GOST-R "Cpt" mark

SAT

CCC (China)

EK Mark (Korea)

MIC Mark (Korea)

Software

MarkVision Professional and printer drivers are provided on the Drivers, MarkVision, and Utilities CD that is packaged with the printer. See Publications section for details. MarkVision Professional for Sun Solaris, SuSE Linux, Red Hat Linux, HP-UX and IBM AIX operating systems are available from the IBM Web site.

The Windows software applications, which operate in the operating systems listed above, are best suited to run with the drivers supplied with the printer. These drivers for Windows take advantage of your printer functions and increase the printer performance wherever possible.

Operating Systems

Infoprint Color 1464 and 1454 are compatible with applications running under the following operating systems for either local or network connections: For information about USB connections, see Local Connections.

Apple Macintosh
Macintosh OS 8.6, 9.x
Macintosh OS X 10.2 or higher

Microsoft Windows

Microsoft Windows 95 4.00950 or later

Microsoft Windows 98.1st Edition

Microsoft Windows 98.2st Edition

Windows Me

Microsoft Windows NT 4 SP6

Microsoft Windows NT 4 Server SP6

Microsoft Windows NT 4 Terminal Server with Citrix MetaFrame 1.8 or XP 1.0

Microsoft Windows 2000 Professional

Microsoft Windows 2000 Server

Microsoft Windows 2000 Advanced Server

Microsoft Windows 2000 Server running Terminal Services

Microsoft Windows 2000 Server running Terminal Services with Citrix MetaFrame 1.8 or XP 1.0

Microsoft Windows XP Home

Microsoft Windows XP Professional

Microsoft Windows Server 2003 Standard Edition

Microsoft Windows Server 2003 Enterprise Edition

Microsoft Windows Server 2003 running Terminal Server

Microsoft Windows Server 2003 running Terminal Services with Citrix MetaFrame 1.8 or XP 1.0

Download the latest printer drivers from the IBM web site

Novell

Novell NetWare** 3.x, 4.x, 5.x, 6.x including full DNS and NDPS support

Novel** Distributed Print ServicesTM (NDPS) 2.0 or later with IBM NDPS IP Gateway.

Download the NDPS IP Gateway from the IBM Web site.

Linux
SuSE Linux 8.0, 8.1, 8.2, 9.0
Red Hat Linux Enterprise 3.0 WS
Red Hat Linux 7.3, 8.0, 9

Download the Enhanced Printer Drivers from the IBM Web site.

UNIX
HP-UX 11.00, 11.11
IBM AIX 5.1, 5.2
Sun Solaris SPARC 7, 8, 9

Download the Enhanced Printer Drivers from the IBM Web site.

IBM AIX Colon Files

IBM AIX 4.2.1, 4.3.3, 5.1, 5.2

Other

Virtually any platform supporting TCP/IP

IBM iSeries Systems with TCP/IP with OS/400(R) V5R1 or later using OS400 Host Print Transform.

Management Solutions (MarkVision**)

MarkVision Professional, MarkVision Messenger, NetPnP and Software Installation and Distribution tools are provided on Drivers, MarkVision and Utilities CDs.

MarkVision Professional

MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devises in an enterprise environment via a web browser. It provides IT administrators with realtime device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.

MarkVision Messenger

MarkVision Messenger provides real-time notification of printer conditions via e-mail, paging, or other applications and facilitates automated responses to these conditions before they become critical and disruptive to user productivity. MarkVision Messenger enhances administrators' quality for service and improves end-user productivity and satisfaction.

NetPnP (provided on CD)

NetPnP senses when a new IBM printer is attached to the network and automatically creates a shared printer object on the Windows NT 4.0 or Windows 2000 system. Furthermore, NetPnP notifies end-users via e-mail that the new network printer is available for printing. Designed for Windows NT 4.0 and Windows 2000 environments, Net PnP makes the Infoprint Color 1464 and 1454 printers available to end-users within seconds of network attachment.

Software Installation and Distribution tools (provided on CD)

In Windows NT 4.0 and Windows 2000 environments, these tools enable administrators to push printer software installation to other Windows NT 4.0 or Windows 2000 workstations or to write a script that will install specified printer software on specified Windows NT 4.0 or Windows 2000 workstations on the network. In Windows 9X environments, it enables administrators to write installation scripts that can then be distributed to other workstations. When executed, these scripts will silently install all specified IBM software.

Solaris Ready for Sun customers

These printers are certified Solaris Ready by Sun and include Infoprint Color 1464 and 1454 Enhanced Printer Drivers for Sun Systems and Sun specific documentation seamless installation and use in Sun Solaris environments. The IBM network printers are Ethernet-ready for use in Sun networks.

The IBM printers with USB interfaces are certified for USB attachment to Sun Blade workstations and Sun Ray appliances. MarkVision Professional is available from the IBM Web site.

IBM Infoprint Manager

Infoprint Manager support: Yes (post GA). Requires administrators to create printer objects.

Network Printer Resource Utility (NPRU)

NPRU will not support the Infoprint Color 1464 and 1454.

TCP/IP Network Port Monitor Utility

This utility will not support the Infoprint Color 1464 and 1454.

LPR Remote Printing Client Utility

This utility will not support the Infoprint Color 1464 and 1454.

802.11g Wireless to Ethernet

Specifications

Model ACR-201-G
Standard IEEE 802.11g, 802.11g WPA-TKIP, WPA-PSK
Host Interface Ethernet, 802.3, RJ-45 receptacle
Frequency 2.4835 GHz (US and Europe)
RF Channels 11 channels (US, Canada)
13 channels (Europe, except France)
4 channels (France)
Transmission power 14 dBm at antenna input typical for 802.11g
16.2 dBm at antenna input typical for 802.11b
Receiver sensitivity -65dBm @ 54Mbps, -80sBm @11Mbps at 1e-5 BER
Typical
Antenna Dipole antenna with ~2dBi gain
Data Rate 1/ 2/ 5.5/ 6/ 9/ 11/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Modulation OFDM with BPSK, QPSK, 16QAM, 64QAM (11g) DBPSK,
DQPSK, CCK (11b)
Link Distance ~1200 ft in open space
Network Types Support both the ad hoc mode and the
infrastructure mode
Data Encryption Support WPA-TKIP, WPA-PSK and 128/64-bit WEP
LED Indicators 4: Power, Transmission, Receiving,
Link/Ethernet-connection
Network Protocol TCP/IP, IPX/SPX, AppleTalk
Support

Printer Management Utilities

MarkVision Professional (provided on the printer CDs)

MarkVision Professional is a cross-platform print management solution that enables IT administrators to proactively monitor and manage network devices in an enterprise environment via a web browser. It provides IT administrators with real time device status and information, centralized device setup, remote printer monitoring and management, and asset management capabilities.

The 802.11g Wireless to Ethernet acts as a wireless Ethernet bridge. When used with a Lexmark printer that supports MarkVision Professional management capabilities, the wireless bridge provides the same level of functionality as if the printer were connected to the network via a wired connection.

MFP Information / Compatibility

When used with a network-capable MFP, the 802.11g Wireless to Ethernet provides network capabilities equivalent to a MFP connected to a wired 10/100BaseTX Ethernet network.

Network Security

The 802.11g wireless to Ethernet supports the following wireless security methods and protocols:

WPA-Personal-level security:
TKIP
Pre-Shared Key (PSK)

WEP:
64-bit
128-bit

These security modes cannot be used in combination. For example, if a user selects WPA-personal, the user cannot enable WEP security features.

In addition to the wireless security methods, the 802.11g Wireless to Ethernet included with the printer or MFP provides the following access control methods that an be used in conjunction with any wireless security methods stated above:
Device configuration password protection
Restricted Server List

Operating System Support

Workstation Operating Systems:
Apple Mac OS 8.6-9.x (LPR printing)
Apple Mac OS X.2 and above (Zero Configuration support)
Windows 98SE, Me
Windows NT 4.0(1)
Windows 2000
Windows XP
Red Hat Linux 7.3, 8.0, 9.0(1)
SuSE Linux 8.0, 8.1, 8.2(1)

Server Operating Systems:

Apple Mac OS X.2 Server and above

Windows NT 4.0 Server(1)

Windows 2000 Terminal Server

Windows 2000 Server, Advanced Server

Windows Server 2003

IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(1)

Virtually any platform supporting TCP/IP(1)

Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0

Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(1)

Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(1)

Red Hat Linux 7.3, 8.0, 9.0(1)

SuSE Linux 8.0, 8.1, 8.2(1)

Note: (1) May require initial configuration through Ad-hoc mode.

Printing Protocols

The 802.11g Wireless to Ethernet feature is compatible with all network protocols supported by the printer.

802.11g Wireless to USB

Network Security

The 802.11g wireless to USB supports the following wireless security methods and protocols:

WPA-Personal:
TKIP
Pre-Shared Key (PSK)

WEP:
64-bit
128-bit

These security modes cannot be used in combination. For example, if a user selects WEP, the WPA-Personal cannot be enabled. In addition to the wireless security methods, the print server provides the following access control methods:
Device configuration password protection
Restricted Server List

Operating System Support

Workstation Operating Systems:
Apple Mac OS 8.6, 9.x (LPR printing)
Apple Mac OS X 10.2 and above (Zero Configuration support)
Windows 98SE, Me
Windows NT 4.0(2)
Windows 2000
Windows XP
Red Hat Linux 7.3, 8.0, 9.0(2)
SuSE Linux 8.0, 8.1, 8.2(2)

Server Operating Systems:

Apple Mac OS X.2 Server and above

Windows NT 4.0 Server(2)

Windows 2000 Terminal Server

Windows 2000 Server, Advanced Server

Windows Server 2003

IBM iSeries or IBM AS/400 Systems with TCP/IP with OS/400? V3R1 or later using OS/400 Host Print Transform(2)

Virtually any platform supporting TCP/IP(2)

Microsoft Windows 2000 Server Terminal Services, with Citrix MetaFrame 1.8 or XP 1.0

Microsoft Windows NT 4.0 Terminal Server, with Citrix MetaFrame 1.8 or XP 1.0(2)

Novell NetWare 5.x/6.x NDPS 2.0 and iPrint(2)

Red Hat Linux 7.3, 8.0, 9.0(2)

SuSE Linux 8.0, 8.1, 8.2(2)

Note: (2) May require initial configuration through Ad-hoc mode.

Printing Protocols

The following print protocols are supported:
Direct IP (TCP 9100)
LPR/LPD (TCP 515)
IPP (Internet Printing Protocol) (TCP 631 or TCP 80)
HBN (Host Based Networking)

Address Management Protocols

The following address management protocols are supported:
Auto-IP
DHCP
DDNS
mDNS
ARP
WINS

Device Management Protocols

The following device management protocols are supported:
Zero Configuration
HTTP
ICMP
SNMP
HCP Host Configuration Protocol
Telnet 9000

File Transfer Protocols

The following file transfer protocols are supported:
FTP (printing, UCF file configuration)
TFTP (printing, code updating)

IPDS is not supported through the USB port.

Network Management

These features provide management capabilities primarily via its embedded web server. Basic network management is also provided using traditional TCP/IP functions.

Basic Management

The following basic management applications are supported:
Ping
Finger
Telnet 9000
Discovery Utility

Advanced Management

These features are designed to allow the user to learn network status and configure network settings remotely. The printer server support
the following management methods:
Embedded Web Server
SNMP
Universal Configuration Files (UCF)

Embedded Web Server Function

Supported Web Browsers
Microsoft Internet Explorer 5.0, 6.0 and newer
Netscape 4.0, 7.0 and newer
Safari 1.0 and newer

Primary Web Server Functions

The following items are available regardless of the status of the USB-attached device:
Name and picture of print server
Wireless status (connect speed, signal strength, Access Point)
Print Server Setup Page
Configuration of all general adapter settings (LAA, Contact Name, Locations, Etc.)
Configuration of all TCP/IP settings
Configuration of password
Links and Index section
Link to Troubleshooting
Applet to flash update

Certifications

802.11g wireless to Ethernet

These features meet the following standards and has obtained the appropriate approvals.
UL 60950-1: Safety of Information Technology Equipment
Code of Federal Regulations 47, FCC Part 15 (Class B)
FCC Part 15 Subpart C Section 15.247
FCC Declaration of Conformity (DoC) Mark on the label
Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
Industry Canada RSS-210
UL 60950 3rd Edition

802.11g wireless to USB

These features meet the following standards and has obtained the appropriate approvals.
Code of Federal Regulations 47, FCC Part 15 (Class B)
FCC Part 15 Subpart C Section 15.247
FCC Declaration of Conformity (DoC) Mark on the label
Industry Canada ICES-003 Issue 3, Interference-Causing Equipment Standard
Industry Canada RSS-210
Underwriters Laboratories, Inc., UL 60950-1
Physical Specifications

Dimensions

Width Depth Height Weight(1)
Network --------- --------- --------- -----------
Printers 604.5 mm 469.9 mm 528.3 mm 47.7 kg
(23.8 in) (18.5 in) (20.8 in) (105 lb)

Network 604.5 mm 469.9 mm 617.2 mm 53.8 kg
Duplex (23.8 in) (18.5 in) (24.3 in) (118.5 lb)
Printer

Note: (1) Weights for low voltage and high voltage modes are the same.

Recommended clearances

Left Right Front Back Top
-------- ------- ------- -------- --------- -
All 609.6 mm 381 mm 508 mm 304.8 mm 1066.8 mm
Printers (24 in) (15 in) (20 in) (12 in) (42 in)

Operating Environment

Operating Environment:
Temperature: 15.6 to 32.2 C (60 to 90 F)
Relative Humidity: 8 to 80%
Altitude: 3,048 meters (10,000 ft)

Powered Off Environment:
Temperature: 10.0 to 43.0 C (50 to 110 F)
Relative Humidity: 8 to 80%
Altitude: 3,048 meters (10,000 ft)

Storage and Shipping (Packed):
Temperature (degrees): -40 to 43.3 C (-40 to 110 F)
Relative Humidity: 8% to 80%
Altitude: 10,300 meters (34,000 ft)

Electrical specifications

Low voltage models
110 - 127 V ac at 47 to 63 Hz nominal
99 - 137 V ac extreme

High voltage models
220 - 240 V ac at 47 to 63 Hz nominal
198 - 259 V ac extreme

Power Consumption

1464 1 1464 1
Printing states 1454 d 1454 dn
-------------------------------------- ---------- ----------
Ave. power while printing 650 watts 650 watts
Ave. power while printing all Options 700 watts 700 watts
Power Saver Mode On 30 watts 30 watts
Power Saver Mode Off 190 watts 190 watts
Maximum current while printing
220 Volts 5.2 amps 5.2 amps
110 Volts 10.2 amps 10.2 amps

Note: All models are Energy Star compliant.

Acoustics

All measurements were made in accordance with ISO 7779 and reported in conformance with ISO 9296.

Base and network models:

Sound
Mode Pressure dBA
---------------------- ------------
Network Printer
Printing 52 dBa
Idle 34 dBa

Network Duplex Printer
Printing (simplex) 52 dBa
Printing (duplex) 57 dBa
Idle 34 dBa

Media Handling Features for Infoprint Color 1464

All printer features are customer installable. FC = feature code.
(#4505, P/N 75P6428) 500-Sheet Drawer

This input option can be installed beneath the printer to offer an added input source which holds approximately 500 sheets of 20 lb. paper.
Minimum required = 0
Maximum allowed = 3 or 1 if 2,000-Sheet Drawer (FC 4520) is installed
Prerequisite = none
Co-requisite = none

(#4501, P/N 75P6429) 500-Sheet Tray

For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. Drawer includes tray plus support unit. For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 500 sheets of (20 lb.) paper.
Minimum required = 0
Maximum allowed = no maximum
Prerequisite = none
Co-requisite = none

(#4520, P/N 75P6430) 2000-Sheet Drawer

This input option can be installed beneath the printer to offer an added input source which holds approximately 2,000 sheets of 20 lb. paper.

Minimum required = 0

Maximum allowed = 1

Prerequisite = none

Co-requisite = If the Duplex feature (FC 4402) is installed, a 500-Sheet Drawer feature (FC 4505) is required and must be installed between the duplex unit and the 2,000-Sheet Drawer

(#4530, P/N 75P6435) Outdoor Media Drawer

This input feature supports up to 100 sheets of outdoor media. Outdoor media is polyester media used for outdoor signs. Samples of outdoor media are included with the feature.

Minimum required = 0

Maximum allowed = 1

Prerequisite = none

Co-requisite = none

Conflict = this feature counts the same as a 500-sheet drawer

(#4502, P/N 75P6431) Envelope Drawer

This feature installs beneath the printer and hold approximately 60 envelopes (20 lb., 75 gsm).
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4402, P/N 75P6432) Duplex Unit

This option offers two-sided printing capability.

Minimum required = 0

Maximum allowed = 1

Prerequisite = none

Co-requisite = If the 2,000-Sheet Drawer feature (FC 4520) is installed, a 500-Sheet Drawer feature (FC 4505) is required and must be installed between the duplex unit and the 2,000-Sheet Drawer

(#4620, P/N 75P6433) Output Expander

This output option offers an additional output destination,
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none
Conflict = This feature is mutually exclusive with the 5-Bin Mailbox (FC 4640).

(#4630, P/N 75P6436) Banner Tray

This feature is designed to hold up to 50 sheets of 210 mm x 914.4 mm (90 gsm) banner paper. It mounts on the auxiliary tray and does not affect any input or output media handling feature. The auxiliary tray can be used normally without removing the banner tray feature.

Minimum required = 0

Maximum allowed = 1

Prerequisite = none

Co-requisite = none

(#4640, P/N 75P6434) 5-Bin Mailbox

This output option offers five output destinations in one. Each of the 5 bins on this option supports approximately 100 pages (20 lb) of paper.
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none
Conflict = This feature is mutually exclusive with the Output Expander

(#4560, P/N 53P9326) Finisher S

This is the short version of the Infoprint Color 1354 finisher. It offers an additional ouput bin, stapling, hole punching and offsetting. The staple cartridge contains 5000 staples. Refill staple cartridges are available.

The short version of the finisher is for printers without the 2,000-sheet drawer. It requires the duplex unit, three optional 500-sheet drawers and the printer stand.
Minimum required = 0
Maximum allowed = 1
Prerequisite = Duplex and three 500-sheet drawers and printer stand
Co-requisite = none
Conflict = This feature is mutually exclusive with the Finisher T.

(#4622, P/N 53P9327) Finisher T

The Infoprint Color 1464 and 1454 finisher offers an additional ouput bin, stapling, hole punching and offsetting. The staple cartridge contains 5000 staples. Refill staple cartridges are available.

The tall version of the finisher is for printers with the 2,000-sheet drawer. It also requires the duplex unit, and one optional 500-sheet drawer.
Minimum required = 0
Maximum allowed = 1
Prerequisite = Duplex and one 500-sheet drawer and 2,000-sheet drawer
Co-requisite = none
Conflict = This feature is mutually exclusive with the Finisher S
Media Handling Features for Infoprint Color 1454

All printer features are customer installable.

(#4505, P/N 75P6428) 500-Sheet Drawer

This input option can be installed beneath the printer to offer an added input source which holds approximately 500 sheets of 20 lb. paper.
Minimum required = 0
Maximum allowed = 3 or 1 if 2,000-Sheet Drawer is installed
Prerequisite = none
Co-requisite = none

(#4501, P/N 75P6429) 500-Sheet Tray

For customer environments with space or budget constraints that would prevent purchase of the complete input drawer option, a separate tray option is available. Drawer includes tray plus support unit. For example, the tray might hold an alternate media, such as letterhead, and temporarily replace a tray with standard media as needed. This version of the tray holds approximately 500 sheets of (20 lb.) paper.
Minimum required = 0
Maximum allowed = no maximum
Prerequisite = none
Co-requisite = none

(#4402, P/N 75P6432) Duplex Unit

This option offers two-sided printing capability.
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = If the 2,000-Sheet Drawer feature is installed, a 500-Sheet Drawer feature is required and must be installed between the duplex unit and the 2,000-Sheet Drawer

Features for Infoprint Color 1464 and 1454
Memory and Flash Memory Features

The Infoprint Color 1464 and 1454 has one slot for memory and one slot for flash memory features. A maximum of 512 MB of memory and 32 MB of flash memory is supported.

The printer has one slot for an optional hard disk with adapter feature.

The memory features for the printer include:

(#4364, P/N 53P9328) 64 MB Memory DIMM
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4390, P/N 53P9329) 128 MB Memory DIMM

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4391, P/N 53P9330) 256 MB Memory DIMM

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4392, P/N 75P4657) 512 MB Memory DIMM

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

The flash memory features for the printer include:
(#4036, P/N 75P4690) 16 MB Flash Card

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4038, P/N 75P4691) 32 MB Flash Card

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

If larger storage is required, an optional hard disk feature is also available.

(#4329, P/N 75P5008) 20+ GB ISP Hard Disk w/Adapter

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none
Conflict = This feature is mutually exclusive with the Optra Forms Hard Disk with Adapter.

(#4565, P/N 75P6441) Printer Stand

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4542, P/N 75P6442) Op Panel Cover

(#4570, P/N 53P7101) Scanner Shelf

Internal Local Connection Features

In addition to the standard USB port for all models, each Infoprint Color 1464 and 1454 model has one interface slot that can be used for optional local connections or network connections.

The following local connection options are supported:
(#4138, P/N 75P4706) RS-232/422C Serial Interface Card

This card provides an RS 232-C serial port and 1284-C parallel port.
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4132, P/N 28P1845) External Serial Adapter

This adapter is installed on the printer's parallel port and receives its power through the parallel port. It utilizes a standard 25-pin D-shell females connector and supports baud rates up to 19,200 bps for RS-232C or 38,400 bps for RS-422.
Minimum required = 0
Maximum allowed = 1
Prerequisite = RS 232/422C Serial interface card
Co-requisite = none

(#4139, P/N 75P4707) Parallel 1284-B Interface Card

This adapter allows an RS-232C Serial/Parallel port with a type C connector (1284-C) to accept a cable with a type B connector (1284-B).
Minimum required = 0
Maximum allowed = no maximum
Prerequisite = none
Co-requisite = none
Cable Features

(#4180, P/N 28P1871) 10 ft. Parallel Cable

Minimum required = 0
Maximum allowed = no maximum
Prerequisite = none
Co-requisite = none

For parallel attachment, this cable is recommended for ten feet or less and must be ordered separately.

(#4183, P/N 28P1874) 50 ft. Serial Cable
Minimum required = 0
Maximum allowed = no maximum
Prerequisite = none
Co-requisite = none

For serial attachment, this cable is recommended for fifty feet or less and must be ordered separately.

(#4184, P/N 28P1875) 2-meter USB Cable

Minimum required = 0
Maximum allowed = no maximum
Prerequisite = none
Co-requisite = none

For USB attachment, this USB cable is recommended and must be ordered separately.
Network Connection Features

Network cards plug into the one interface slot. Only one card is allowed per network protocol. That is, only one Ethernet and only one Token-Ring card.

Network Cards for Internal Print Server Features

Infoprint Color 1354 network models come standard with Fast Ethernet 10/100BaseTx built-in to the controller board. Additionally, Infoprint Color 1464 and 1454 supports the following MarkNet N2000 Series Internal Print Servers:

(#4120, P/N 75P4696) Token-Ring

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4162, P/N 75P4833) Ethernet 10/100BaseTX

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none
Conflict = This feature cannot be installed in the network or duplex network models

Network Cards for External Print Servers Features

The following features provide MarkNet X2000 Series external network connection:

(#4163, P/N 28P1839) Ethernet 10/100BaseTX-1 Port

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4165, P/N 28P1841) Ethernet 10/100TX/10Base2-1 Pt
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4164, P/N 28P1840) 10/100BaseTX-3 Port

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4121, P/N 28P1836) Token-Ring-3 Port

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4174, P/N 75P5452) Ethernet to USB Adapter

MarkNet Compatibility

The Ethernet and Token-Ring print servers and standard Ethernet connections support the following protocols:
TCP/IP
Novell IPX/SPX
AppleTalk**
LexLink** (DLC/LLC)

The TCP/IP standard set of application services including DHCP, WINS, SNMP (industry-standard printer MIB), http, lpr/lpd, ftp, tftp, ping, finger, telnet, bootp and rarp. The following protocols are also supported:
IPP: Internet Printing Protocol
SLP: Service Location Protocol
NTP: Network Timing Protocol

The printer with standard Ethernet MarkNet N2000 Series internal print servers and the MarkNet X2000 Series external print servers support a Resident Web page with Microsoft Internet Explorer 4.0 or later and Netscape Navigator 4.5 or later for Windows 95/98, Windows Me, Windows 2000 or Windows NT.

The remote operator panel is available from MarkNet N2000 internal print servers or MarkNet X2000 external print servers.

Optra Forms Features

(#4871, P/N 28P1862) Optra Forms Software

Optra Forms uses 'up-to-the-minute' data directly from customer applications and combines it with printer resident electronic forms with text and graphics to produce (print) completed forms such as invoices, statements, pick slips, labels, purchase orders or confirmations with bar codes or other specialized graphics on a variety of paper types. For Optra Forms:

For Optra Forms:

No Server-based or host based merge program or software is required.

Use with virtually any ASCII text print file from any platform, mainframe, iSeries, UNIX or workstation, over Coax, Twinax, parallel, serial or LAN (TCP/IP).

Generally, make no changes to database applications.

Print different forms at different locations from the same database, possibly using the same data.

Update forms quickly and easily (globally) over the LAN

Provides support for bar codes, color, duplex, multipage form sets and more.

Store forms as efficient, compact forms in flash.

Optra Forms is supported by the Infoprint Color 1464 and 1454 printer using the Optra Forms 16 MB and 32MB Flash DIMM's or Optra Forms Hard Disk.
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = Optra Forms flash or Optra Forms Hard Disk with Adapter

(#4872, P/N 28P1863) Optra Forms Director Software

Optra Forms Director is a Windows NT or Windows 2000 server-based program. Using additional host software (AS/400, UNIX or Mainframe), the host application sends a print spool file to a Windows NT or 2000 print queue. Optra Forms Director service automatically pareses the print spool file into single or multiple print jobs using Microsoft Visual Basic Script or JScript methods and Named Pipes.

The spool file which may contain many individual documents is customized by separating it into individual jobs or by adding data or particular commands to the individual documents that are then sent to IP, LPR, or Windows printer destinations. The additional data or commands may be to staple, separate documents with a cover page, copy and collate, print on both sides, offset stack, fax, or hole punch each individual job. Print jobs are customized and distributed electronically to network printers automatically without making any changes to host applications.

Optra Forms is supported on the Infoprint Color 1464 and 1454 using a Optra Forms flash or Hard Disk. Only one Optra Forms flash DIMM is supported. If a Flash DIMM and Optra Forms Flash DIMM are both installed, the Optra Forms DIMM will be used.
Minimum required = 0
Maximum allowed = 1
Prerequisite = Optra Forms Software
Co-requisite = none

(#4880, P/N 53P9307) Optra Forms Manager

Optra Forms Manager enables administrators to manage and distribute forms to multiple printers over a TCP/IP network. This includes loading new forms and updating existing forms on an Optra Forms printer over a TCP/IP network.

Optra Forms Manager lets you:

Keep a master copy of all forms on a PC

Update all printers at same time over TCP/IP after a printer query for its resident Styles and creation dates. Only matching Styles (flash files) with different creation dates are downloaded to the printer over TCP/IP.

Import a printer IP address txt file (also from MarkVision** registry)

Select the printers to which the Download or Update operations apply.

Run the update as a batch job

Create a log file to know successful printer updates

Create a Style report and save it to a comma separated variable (CSV) file giving better knowledge about the forms in all the printer. The Style report includes the printer listed by their IP address or DNS name and a description, Style names and their versions and the Optra Forms Merge program version in each printer.

Create PDF files (using Acrobat Distiller) of the data merged with forms after retrieving archive data files from the Optra Forms hard disk. The PDF file can be saved as a softcopy archive file.

Note: With an Optra Forms hard disk, crea te a job buffering partition or change its size. After the disk is formatted and partitioned, the Optra Forms Merge program is written to the disk.

To use Optra Forms Manager, the Optra Forms printers must be connected to a TCP/IP network. The LPR protocol is also supported to download forms.

Optra Forms Manager is now available on a separate CD for those customers who want to use this program to more effectively manage their Optra Forms printers over TCP/IP. Other third party service providers can also manage their customers forms more cost effectively.

Minimum required = 0
Maximum allowed = 1
Prerequisite = Optra Forms Flash or Optra Forms Hard Disk w/Adapter
Co-requisite = none

(#4876, P/N 75P4694) Optra Forms 16 MB Flash Card
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = Optra Forms Software

(#4881, P/N 75P4693) Optra Forms 32 MB Flash Card
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = Optra Forms Software

(#4877, P/N 53P9343) Optra Forms Hard Disk w/Adapter
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = Optra Forms Software
Conflict = This feature is mutually exclusive with the 20+GB Hard Disk with Adapter.

The adapter plugs into a disk interface slot and does not take up a memory or interface slot.

(#4878, P/N 28P1869) Optra Forms 2-Key Security
Minimum required = 0
Maximum allowed = 1
Prerequisite = Serial Port & Optra Forms SW
Co-requisite = none
Conflict = none

For added security, confidential forms printing can be restricted to to authorized personnel using the security features. This is a lock and key that attaches to the printer serial port. When the key is removed, the printer will still print but confidential forms will not.

(#4170, P/N 53P7854) 802.11b Wireless Adapter

This feature allows the printer to be connected directly to a wireless LAN using the IEEE 802.11b wireless standard. This standard operates at speeds of up to 11 megabits per second (Mbps). The range of this wireless adapter depends on the environment, whether used indoors or outdoors and building construction. Typical indoor ranges are 20-50 meters and outdoor ranges are 100-200 meters. Performance will degrade with distance. The wireless LAN feature is compliant with any WiFi-compliant device.

The feature is an external adapter that connects to the ethernet port on the printer. The ethernet port can be the standard port that comes on any network model, or an internal ethernet or external print server port. This feature includes a cable that plus into the Ethernet port.
Minimum required = 0
Maximum allowed = 1
Prerequisite = network model or Ethernet feature, Co-requisite =none
Applications Solution Features

These features plug into the one application solution features slot.

(#4823, P/N 75P6440) Decryption Card

This feature offers an encryption solution for print output on hosts such as a mainframe, UNIX server, Microsoft Windows PC or Apple workstation that connect over a TCP/IP network to the IBM workgroup printer. The decryption card is installed in the printer and decryption takes place at the printer for maximum security.
Minimum required = 0
Maximum allowed = 1
Prerequisite = Network or Duplex Network model,
Co-requisite = none

(#4870, P/N 75P6438) Bar Code Card

The Bar Code Option Card enables the Infoprint Color 1464 and 1454 printers to print a wide variety (over 47) of the most popular industry-standard bar codes. The Bar Code card primarily generates bar codes algorithmically. The Bar Code Option Card emulates HP printers with an HP Barcodes&More Cartridge/ SIMM/DIMM or a JetCAPS (BarSIMM(/BarDIMM((v.2.0b) installed for compatibility with existing bar code applications using HP/JetCAPS solutions.
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4821, P/N 75P6437) ImageQuick Card

The ImageQuick Option Card enables the Infoprint 1332/1352 laser printers to print PDF files, TIFF, GIF, JPEG, PNG, BMP, PCX, DCX, HTML files or URLs referencing PDF or HTML files directly to the printer quickly and easily without using a driver. The Drag'N'Print Utility is included and can be used to create URL bookmarks or to print these objects directly.
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4810, P/N 75P4705) Japanese Font Card

This Card contains two scalable fonts for use in PostScript emulation.
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4811, P/N 75P4703) Simplified Chinese Font Card

This font DIMM contains four scalable fonts for use in both PCL and PostScript.
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4812, P/N 75P4704) Traditional Chinese Font Card

This font DIMM contains three scalable fonts for use in both PCL and PostScript.
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

(#4813, P/N 75P5306) Korean Font Card

This font DIMM contains fonts for use in both PCL and PostScript.
Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none
IBM Environment Solution Features

(#4820, P/N 75P6439) Card for IPDS & SCS/TNe

Minimum required = 0
Maximum allowed = 1
Prerequisite = none
Co-requisite = none

This feature is installed in the flash memory/applications solutions slots.

The Card for IPDS and SCS/TNe provides AFP/IPDS and SCS (LU1) data stream support for IBM mainframe and iSeries computers. The Card for IPDS and SCS/TNe allows customers to print AFP/IPDS or SCS(LU1) documents over TCP/IP to LAN printers

Color Printing

This affordable Card for IPDS and SCS/TNe provides configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers.

For IPDS, full color printing including IOCA Function Set 45 has been added. Printing of documents and images in full color is controlled by a Color Mode IPDS menu setting.

For IPDS, N-up and N-up Explicit Page Placement support has been added. Print 1 to 4 partitions per side or up to 8 pages per sheet when printing duplex pages.

For IPDS, Quick Response (QR) 2D bar codes are now supported in the bar code tower.

For IPDS, print DBCS downloaded outline and bitmap fonts from the host. Simplified Chinese, Traditional Chinese, Korean and Japanese can be downloaded and printed from the host

Detailed information on this feature is provided below. This feature is installed in the optional firmware slot.

IPDS is only supported for Single Byte Character Set and does not support Double Byte Character Set.

Details on Card for IPDS and SCS/TNe Emulation

Product Overview:

The SCS/TNe or IPDS configuration settings can be changed using MarkNet print server's resident web server, a browser and the printer's IP address.

For IPDS emulation printing, the capture of outline fonts (LF3) is now supported.

These affordable Cards for IPDS and SCS/TNe provide configuration flexibility and compatibility for AFP/IPDS or SCS printing over TCP/IP to LAN printers. These Cards for IPDS and SCS/TNe are compatible with IBM mainframe or IBM iSeries applications that generate SCS (LU1) output or with applications that output AFP/IPDS through Print Services Facility (PSF).

IBM continues to make it easy for IS/IT managers to have an affordable printing solution in a distributed network or on a LAN for applications or software that generate AFP/IPDS or SCS. This includes:

PDF417 2D bar code, Data Matrix, MaxiCode 2D bar code support, QR code 2D barcode

Using AFP/IPDS and PSF, capture fonts to hard disk or to flash memory resulting in reduced network traffic over LAN, coaxial or twinaxial connections.

Supports TN3270E or TN5250E SCS (LU1) over the LAN using TCP/IP with Telnet.

No changes to host applications.

Supports emulation of common IBM IPDS and SCS printers.

Additional or remote controllers with twinax or coax cabling are unnecessary. However, twinax and coax connections continue to be available using the Coax/Twinax Adapter for SCS.

One LAN printer can print LAN (PostScript, PCL, etc) and mainframe or iSeries documents (AFP/IPDS, SCS).

With a card and the standard Ethernet network port or a MarkNet print server using TCP/IP, the printer becomes an IBM host workstation printer capable of printing AFP/IPDS or SCS documents from an iSeries or System/390 computer.

With the appropriate host software and one of these options, the IBM printer emulates an IBM mainframe or iSeries host printer. See the compatibility section for details.

With the TN3270E and TN5250E extended Telnet protocol support in these options, the printer emulates one TN3270E printer session and up to 4 TN5250E printer sessions using the LU1 SCS data stream over TCP/IP. This is supported directly from an iSeries or from a mainframe using TCP/IP or through any TN3270E capable gateway that supports TN3270E according to RFC 2355. The DSC/DSE or SCS data streams over LU3 or LU0 are not supported. The Telnet protocol function is only supported with through the standard Ethernet network port or with the MarkNet N2000 print servers. See the compatibility section for more details.

For IPDS emulation, the card supports resident scalable fonts and 300, 600, 1200 image quality or 1200 dpi (except Infoprint 1145) print resolutions. The resolution is selected through an IPDS MENU setting. This setting determines the print resolution of IPDS text, graphics, bar code, scalable image and scalable font data.

The printer can be configured to take advantage of additional RAM, and when attached to a LAN through the standard Ethernet port or a MarkNet print server, can save IPDS resources to improve performance for complex IPDS print jobs with host resources such as fonts, overlays or page segments.

The IPDS emulation supports the IPDS data and resource towers. SBCS fonts can now be downloaded, captured and saved to hard disk or flash memory in the printer. The US Postal Bar code POSTNET font and the Euro currency symbol are supported within IPDS.

The Euro currency symbol is also supported for the SCS, PostScript and PCL 6 emulations.

Fonts

AFP/IPDS Font and Typestyle Support:

The Card for IPDS supports resident scalable fonts. The font complement with 12 typestyles supports the IBM Font Collection (Core Int erchange Scalable Font Sets - Courier, Times New Roman and Helvetica faces).

The following languages are supported:

Latin 1: Afrikaans, Belgian (French and Dutch), Brazilian Portuguese, Canadian English, Canadian French, Catalan, Danish, Dutch, Finnish, French, German, Icelandic, Italian, Latin American Spanish, Norwegian, Portuguese, Spanish (Castillian), Swedish, Swiss (German, French and Italian), United Kingdom English, United States English

Latin 2/ROECE: Albanian, Croatian, Czech, East German, Hungarian, Polish, Romanian, Serbian, Slovak, Slovenian

Latin 3, 4, 5 and 6: Maltese, Turkish, Estonian, Greenlandic, Lappish, Latvian, Lithuanian

Greek

Cyrillic for: Bulgarian, Byelorussian, Macedonian, Russian, Serbo-Croatian, Ukrainian.

The font complement for the IBM Coordinated Scalable Font Set provides support for Latin 1 languages in 3 Letter Gothic (medium, bold and italic) and 3 Prestige (medium, bold and italic) scalable typestyles. Scalable OCR-A and OCR-B typestyles are supported.

The following fonts are supported using bitmaps: APL 12, Boldface PS, Boldface Italic PS, OCR-A 10, OCR-B 10 and Prestige PS. The OCR bitmap fonts have different FGIDs than the scalable font versions.

The IBM 4028 Compatibility Font set consists of 22 fixed pitch typestyles supported by bitmap fonts. Times Roman typestyles (13) are created from Times New Roman scalable typestyles of the same weight and style.

The IBM 3812/3816 Compatibility Font set consists of 35 typestyles supported by bitmap fonts at 240 dpi.

Font Capture

Fonts can also be captured dynamically and saved (cached) to hard disk or flash memory in the printer. A captured font then appears as a printer resident font. If many fonts are used in the jobs that are printed, capturing fonts and saving them in the printer will decrease network traffic on busy networks.

PSF defines fonts as either public or private. In order to capture a font, it must be marked as eligible and public. A private font is not eligible to be captured.

Note: Do not mark sensitive fonts such as signatures and MICR fonts as eligible to be captured. Check the font licensing information before a font is made eligible for capture.

If a font is to be captured, the appropriate files for the coded font or character set and code page resources must all be marked.

The printer must also be defined as capable to capture fonts in PSF. For bitmap fonts, the font resolution of the font captured must match the resolution of the emulated printer for it to be recognized by the printer as a printer resident font. For example, the IBM 3812 and 3816 printer emulations require 240 dpi fonts. The IBM 4028 printer emulation requires 300 dpi fonts.

iSeries

On the iSeries, Font capture is supported by OS/400 V5R1 or later. To define the printer as capable to capture, in the PSF configuration (CRTPSFCFG/CHGPSFCFG), set FNTCAPTURE (*YES).

Eligible fonts must be marked. Display the font attributes to identify marked fonts (DSPFNTRSCA). Verify that *YES is specified for the Font Capture attribute. Use Create Font Resource (CRTFNTRSC) to mark font resources from other systems. Use Change Font Resource (CHGFNTRSC) to mark fonts that are not marked as eligible.

For a font to be eligible for capture, it must have non zero fields for FGID and GCSGID. Any fonts captured and saved in the printer's hard disk or flash memory are saved across instances of the writer.

Mainframe (OS/390 or z/OS)

Font capture is supported by PSF for OS/390 or z/OS. Use APSRMARK to mark eligible fonts if they are not already marked. The IBM Font Collection fonts are already marked as eligible for capture.

SCS Font and Typestyle Support

The SCS emulation uses the default resolution set using the Quality menu from the printer's operator panel. The SCS emulation in the card uses PCL fonts from the printer firmware. If the printer is set to 600 dpi, then all SCS data is printed with 600 dpi PCL fonts. It is possible to imbed PCL and PJL commands into the SCS data stream and pass them to the printer utilizing ASCII transparency.

On the iSeries, fonts can be selected by specifying the FGID (Font Global Identifier) or by characters per inch (CPI). With IBM mainframes, only CPI font selection is possible.

A parameter in the SCS data stream (Final Form Text (Level 2) Document Content Architecture (FFT (L2) DCA)) Page Presentation media (PPM) command is used to control Duplex printing.

These 6 fonts are included in SCS emulation as 300 dpi bitmap fonts: OCR-B (3), Boldface Italic (155), Boldface (159), Essay (160), Essay Bold (163) and Document (175).

Compatibility

For the Card for IPDS and SCS/TNe, IPDS is supported under the IPDS MENU settings and SCS is supported under the SCS/TNe MENU settings.

Support Notes:

Microcode updates and User's Guides are available from the IBM web site.

See the appropriate User's Guide for configuration instructions.

When the printer is emulating an IBM printer, the function supported depends on the IBM host software.

For Direct Network Attachment - Hardware Compatibility

When the printer contains an optional Card for IPDS and SCS/TNe, it attaches to a network using one of the following MarkNet print servers:

Standard Ethernet (100BaseTX/10BaseT) Network port in the printer
MarkNet** N2000 Series print servers
MarkNet X2000 Series print servers (AFP/IPDS only)
MarkNet Pro print servers (AFP/IPDS only)

The optional MarkNet print servers support Token-Ring (4Mbps or 16 Mbps), Ethernet 10BaseT/10Base2 and Ethernet 100BaseTX/10BaseT with the following Network Operating Systems: Novell NetWare (including NetWare Directory Services - NDS and NDPS), Microsoft Windows NT 4.0 Server, Microsoft Windows 2000 Server and Advanced Server, TokenTalk and EtherTalk, and the following UNIX platforms: Caldera OpenLinux, IBM AIX, Compaq Tru64 (Digital), HP-UX, Red Hat Linux, SCO OpenServer, UnixWare, SGI IRIX, Sun Solaris, Sun Solaris x86, SuSE Linux and TurboLinux.

Note: .MarkNet N2000 microcode level 3.15.x or later is required for SCS/TNe support.

Note: For OptraImage network ports, microcode level 5.15.x or later is required for SCS/TNe support.

Note: Any MarkNet X2000 microcode level provides AFP/IPDS support only.

Note: For IPDS printing, a minimum of 16MB of printer memory is required.

Software Compatibility for AFP/IPDS Printing over TCP/IP

The IBM host software requirements for AFP/IPDS printing when the printer is emulating an IBM 381x, 43xx, 311x or 4028 printer are:
OS/400 V5R1 or later through PSF/400 (See Note).

Note: With OS/400 V5R1, to print IPDS over TCP/IP through PSF/400.

Software Compatibility for SCS LU1 Printing over TCP/IP

The IBM iSeries software requirements for TN5250e SCS (LU1) printing using up to 4 sessions when the printer is emulating an IBM 3812-01 printer are:
OS/400 V5R1 or later with all PTFs applied

Note: Up to four (4) TN5250e sessions from multiple hosts are supported; however the SCS Menu options settings for all 4 sessions are the same.

The IBM mainframe software requirements for TN3270e SCS (LU1) printing using one session when the printer is emulating an IBM 3287 printer are:

IBM Communications Server (CS) for OS/390 or z/OS Version 2 Release 5 or later on ESA systems (Note: all appropriate APARs must be applied)

TCP/IP for VM/ESA Version 2 Release 4 or later (function level 310 or later)

TCP/IP for VSE/ESA V1 R3 or later using General Print Server Feature

Using Cisco 7500 Series Routers

SCS LU1 Printing using a Gateway and TCP/IP

If TN3270E capable SNA gateway software supports the TN3270E protocol according to RFC 2355, then a TN3270e session can be used to print SCS jobs directly from a mainframe or iSeries. Examples of these gateways are:

IBM SecureWay Communications Server 6.0.2 for Windows NT 4.0, Windows 2000, AIX, UnixWare 7, OS/2 Warp

Microsoft NetResults SNA Server 4.0

Novell NetWare for SAA 4 as either a TN3270E Server or TN5250 Server

Attachmate E-Vantage SNA Gateway 2.0

Barr Systems Communications Server

Cisco TN3270 Server

OpenConnect using the WebConnect SNA Access Server or SNA Print Server

(P/N 75P6857) 802.11g Wireless to Ethernet
Minimum required = 0, maximum allowed = 1,
Prerequisite = network model or model with internal Ethernet card, Co-requisite = none

The IBM 802.11g Wireless to Ethernet allows customers to quickly place Ethernet-capable workgroup printers or multifunction priners (MFPs) on a wireless network. This wireless print adapter is a bridge that uses the existing Ethernet port of the printer or MFP, which in turn provides a wireless solution that is flexible and easy to use. It supports both 802.11b and 802.11g wireless standards. This feature includes one Ethernet (RJ-45) port for connection to the printer.

Very few steps are required to configure the 802.11g adapter. A setup utility is not needed, as the setup is done using your Windows-based browser. The 802.11g Wireless Print Adapter is also supported in a Mac OS X environment using the printer or MFP Zero Configuration networking, that allows automatic printer discovery to make it easier for users to locate devices on a network.

By using the existing Ethernet on the printer or MFP, the adapter supports all the networking capabilities the internal Ethernet card provides. This includes TCP/IP printing support (including port 9100 printing) and printing capabilities from most operating systems supporting IP. Strong address management support from DHCP and AutoIP allows the adapter to easily obtain an IP address. Full name resolution support through WINS, Dynamic DNS and multicast DNS permits quick name to address resolutions. Industry-standard device management protocol support (HTTP, SNMP) ensures compatibility with most network device management utilities.

Since the 802.11g wireless to Ethernet is transparent to MarkVision Professional, all mass management capabilities available in printers and MFPs are available to the administrator when using the 802.11g wireless to Ethernet. In addition to these capabilities, the device includes an embedded web server.

An embedded web server allows administrators to easily manage the wireless adapter through a standard web browser. While settings on the adapter are optimized for most environments, through a web browser an administrator can easily make changes to the device.

(P/N 75P6854) 802.11g Wireless to USB
Minimum required = 0, maximum allowed = 1,
Prerequisite = none, Co-requisite = none

The 802.11g Wireless to USB is a Wi-Fi Certified device supporting both 802.11b and 802.11g networking technologies and offers a USB 2.0 Full Speed port to connect to the printer. Its WPA personal security offers a high level of protection for value conscious consumers.

Setup is a breeze with this print server. In Microsoft Windows environments (98SE and above), it offers an intuitive setup wizard to guide the user through installation of most printers.

The 802.11g Wireless to USB also provides an easy installation for Mac OS X environments using Zero Configuration networking which allows automatic printer discovery, making it easier for users to locate devices on a network.

By offering TCP printing support (including port 9100 printing), this feature provides network printing capabilities from most operating systems supporting IP. Strong address management support from DHCP and AutoIP allows this feature to easily obtain an IP address. Full name resolution support through WINS, Dynamic DNS and multicast DNS permits quick name to address resolutions. Industry-standard device management protocol support (HTTP, SNMP) ensures compatibility with most network device management utilities.

An embedded web server allows administrators to easily manage the print server through a standard web browser. While settings on the print server are optimized for most environments, through a web browser an administrator can easily make changes to the device. Customizable settings allow the network administrator to get the most from this feature.

Trademarks

(R), (TM), * Trademark or registered trademark of International Business Machines Corporation.

** Company, product, or service name may be a trademark or service mark of others.

Windows is a trademark of Microsoft Corporation.

UNIX is a registered trademark in the United States and other countries licensed exclusively through X/Open Company Limited.
IBM Corporation 2006.