Zebra 105Se Printer

 
 
 
 



Zebra Z105 SE Thermal Label Printer
Fully refurbished with 90-day warranty
Z105SE
$937.00










Zebra 105Se
  • Thin film printhead with Energy Control
  • Thermal transfer or direct thermal printing:
      • standard 203 dots/inch (8 dots/mm);
      • optional 152 dots/inch (6 dots/mm) or 300 dots/inch (12 dots/mm) resolution
  • Maximum print width: 4.09"(104mm)
Media Dimensions
  • Minimum label width: 0.79" (20mm)
  • Maximum label width: 4.52" (115mm)
  • Minimum label length: 0.5" (12mm) in rewind and peel modes, 0.63" (16mm) in tear- off mode, and 1.5" (38mm) in cutter mode
  • Maximum print length:
    16.0" (406mm) 300dpi
    (w/std. mem.) 12.0" (304mm) 203dpi
    (w/std. mem.) 22.0" (558mm) 152dpi
  • Total thickness (label and liner): 0.003" (0.076mm) to 0.012" (0.304mm)
  • Maximum label roll diameter(OD): 8.0" (203mm)
  • Media core inside diameter: 3.0" (76mm)
  • Standard transmissive media sensing (label gap/notch)
Memory
  • 1 MB DRAM
Ribbons
  • Maximum outside diameter: 3.2" (81mm)
  • Ribbon core inside diameter: 1.0" (25.4mm)
  • Width range: 0.79" (20mm) to 5.31" (134.8mm)
Print Speeds
  • Programmable constant printing speeds of 2" (51mm), 3" (76mm), 4" (102mm), 5" (127mm) and 6" (152mm) per second
  • Speeds with optional 300dpi printhead are 2.4" (61mm), 3" (76mm) and 4" (102mm) per second
Printer Programming Options
  • ZPL II or ZPL (selectable through software)
  • Zebra printer driver for Windows operating system
  • BAR-ONE Windows-based WYSIWYG on-screen label design application software
  • PC-470 print controller with keyboard and display for stand-alone applications
Fonts
  • 7 bitmapped, 1 scalable (CG Triumvirate Bold Condensed)
  • IBM Code Page 850 International Characters
  • Optional fonts: available on EPROM as scalable or smooth bit-mapped fonts in standard, bold, italic and bold italic
  • Futura, CG Triumvirate Condensed, CG Palacio, CG Times or Univers character sets
Bar Code Symbologies
Code 11UPC-A, UPC-EIndustrial 2 of 5
Code 39EAN-8, EAN-13LOGMARS
Code 93PlesseyPostnet
Code 128 with subsets A/B/C and UCC Case CodesInterleaved 2 of 5EAN and UPC with 2 or 5 digit supplements
CodabarStandard 2 of 5MSI
ISBT 128




2-D Symbologies

CODABLOCK PDF417Code 49
Maxi CodeDatamatrixQR Code
Electronics
  • 32-bit microprocessor
Electrical
  • Switch selectable 115 VAC +15/-20%,
  • 5 amp fused; 230 VAC +/-15%, 3 amp fused (48-62Hz)
Communications Interface
  • Centronics parallel or RS-232C serial ports, 110-19.2kB configurable BAUD rate, parity, data bits, XON-OFF/DTR protocol
Physical
  • Height: 15.4" (391mm)
  • Width: 10.5" (267mm)
  • Depth: 18.9" (480mm)
  • Weight without options: 43 lbs (19.5kg)
Environment
  • Operating temperature: 41?F (5C) to 104F (40C)
  • Operating humidity 20-85% non-condensing
  • Storage/transportation: -40F (-40C) to 158F (70C), 20% to 85% non-condensing R.H.
Options
  • Label peel and liner rewind (for print-and-apply)
  • Rewind (full label roll is rewound internally)
  • High-performance cutter cuts full-width media, under software control (not compatible with rewind and peel options)
  • Printhead 152.4 dots-per-inch (6 dots/mm) resolution
  • Printhead 300 dots-per-inch (12 dots/mm) resolution
  • Internal Fan-fold Media Supply Bin (not compatible with internal rewind or peel options)
  • Additional scalable and smooth bit-mapped fonts
  • Reflective (black mark) media sensor (in addition to standard transmissive sensor), switch selectable
    BAR-ONE label design software